Merge pull request #5 from DmitryBorisenko33/development

Pressure calculation changed

Cmd.ino

@@ -12,17 +12,53 @@ void CMD_init() {
 
   sCmd.addCommand("switch",  switch_);
 
+#ifdef analog_enable
   sCmd.addCommand("analog",  analog);
+#endif
+#ifdef level_enable
   sCmd.addCommand("level",  level);
+#endif
+#ifdef dallas_enable
   sCmd.addCommand("dallas",  dallas);
-
+#endif
+#ifdef dht_enable
   sCmd.addCommand("dhtT",  dhtT);
   sCmd.addCommand("dhtH",  dhtH);
-  sCmd.addCommand("dhtPerception",  dhtPerception);
-  sCmd.addCommand("dhtComfort",  dhtComfort);
-  sCmd.addCommand("dhtDewpoint",  dhtDewpoint);
+  sCmd.addCommand("dhtPerception",  dhtP);
+  sCmd.addCommand("dhtComfort",  dhtC);
+  sCmd.addCommand("dhtDewpoint",  dhtD);
+#endif
 
+#ifdef bmp_enable
+  sCmd.addCommand("bmp280T",  bmp280T);
+  sCmd.addCommand("bmp280P",  bmp280P);
+#endif
+
+#ifdef bme_enable
+  sCmd.addCommand("bme280T",  bme280T);
+  sCmd.addCommand("bme280P",  bme280P);
+  sCmd.addCommand("bme280H",  bme280H);
+  sCmd.addCommand("bme280A",  bme280A);
+#endif
+
+#ifdef stepper_enable
+  sCmd.addCommand("stepper",  stepper);
+  sCmd.addCommand("stepperSet",  stepperSet);
+#endif
+
+#ifdef servo_enable
+  sCmd.addCommand("servo",  servo_);
+  sCmd.addCommand("servoSet",  servoSet);
+#endif
+
+#ifdef serial_enable
+  sCmd.addCommand("serialBegin",  serialBegin);
+  sCmd.addCommand("serialWrite",  serialWrite);
+#endif
+
+#ifdef logging_enable
   sCmd.addCommand("logging",  logging);
+#endif
 
   sCmd.addCommand("inputDigit",  inputDigit);
   sCmd.addCommand("digitSet",  digitSet);
@@ -36,30 +72,18 @@ void CMD_init() {
   sCmd.addCommand("text",  text);
   sCmd.addCommand("textSet",  textSet);
 
-
   sCmd.addCommand("mqtt",  mqttOrderSend);
   sCmd.addCommand("http",  httpOrderSend);
+
+#ifdef push_enable
   sCmd.addCommand("push",  pushControl);
+#endif
+
+  sCmd.addCommand("update",  update_firmware);
+  sCmd.addCommand("firmware",  firmware);
 
 
   handle_time_init();
-
-  //======новые виджеты ver2.0=======//
-  /*
-    sCmd.addCommand("inputText",  inputText);
-    sCmd.addCommand("inputTextSet",  inputTextSet);
-
-    sCmd.addCommand("inputTime",  inputTime);
-    sCmd.addCommand("inputTimeSet",  inputTimeSet);
-
-    sCmd.addCommand("inputDate",  inputDate);
-    sCmd.addCommand("inputDateSet",  inputDateSet);
-
-    sCmd.addCommand("inputDate",  inputDate);
-
-    //sCmd.addCommand("inputDropdown",  inputDropdown);
-  */
-  //=================================//
 }
 
 
@@ -70,21 +94,21 @@ void button() {
 
   String button_number = sCmd.next();
   String button_param = sCmd.next();
-  String viget_name = sCmd.next();
+  String widget_name = sCmd.next();
   String page_name = sCmd.next();
   String start_state = sCmd.next();
   String page_number = sCmd.next();
 
-  jsonWrite(optionJson, "button_param" + button_number, button_param);
-  jsonWrite(configJson, "buttonSet" + button_number, start_state);
+  jsonWriteStr(configOptionJson, "button_param" + button_number, button_param);
+  jsonWriteStr(configLiveJson, "button" + button_number, start_state);
 
   if (isDigitStr (button_param)) {
     pinMode(button_param.toInt(), OUTPUT);
     digitalWrite(button_param.toInt(), start_state.toInt());
   }
 
-  if  (button_param == "scenario") {
-    jsonWrite(configSetup, "scenario", start_state);
+  if  (button_param == "scen") {
+    jsonWriteStr(configSetupJson, "scen", start_state);
     Scenario_init();
     saveConfig();
   }
@@ -102,21 +126,21 @@ void button() {
       str = deleteBeforeDelimiter(str, ",");
     }
   }
-  createViget (viget_name, page_name, page_number, "vigets/viget.toggle.json", "buttonSet" + button_number);
+  createWidget (widget_name, page_name, page_number, "widgets/widget.toggle.json", "button" + button_number);
 }
 
 void buttonSet() {
 
   String button_number = sCmd.next();
   String button_state = sCmd.next();
-  String button_param = jsonRead(optionJson, "button_param" + button_number);
+  String button_param = jsonReadStr(configOptionJson, "button_param" + button_number);
 
-  if (button_param != "na" || button_param != "scenario" || button_param.indexOf("line") != -1) {
+  if (button_param != "na" || button_param != "scen" || button_param.indexOf("line") != -1) {
     digitalWrite(button_param.toInt(), button_state.toInt());
   }
 
-  if  (button_param == "scenario") {
-    jsonWrite(configSetup, "scenario", button_state);
+  if  (button_param == "scen") {
+    jsonWriteStr(configSetupJson, "scen", button_state);
     Scenario_init();
     saveConfig();
   }
@@ -135,23 +159,23 @@ void buttonSet() {
     }
   }
 
-  eventGen ("buttonSet", button_number);
+  eventGen ("button", button_number);
 
-  jsonWrite(configJson, "buttonSet" + button_number, button_state);
-  sendSTATUS("buttonSet" + button_number, button_state);
+  jsonWriteStr(configLiveJson, "button" + button_number, button_state);
+  sendSTATUS("button" + button_number, button_state);
 }
 
 void buttonChange() {
   String button_number = sCmd.next();
-  String current_state = jsonRead(configJson, "buttonSet" + button_number);
+  String current_state = jsonReadStr(configLiveJson, "button" + button_number);
   if (current_state == "1") {
     current_state = "0";
   } else if (current_state == "0") {
     current_state = "1";
   }
   order_loop += "buttonSet " + button_number + " " + current_state + ",";
-  jsonWrite(configJson, "buttonSet" + button_number, current_state);
-  sendSTATUS("buttonSet" + button_number, current_state);
+  jsonWriteStr(configLiveJson, "button" + button_number, current_state);
+  sendSTATUS("button" + button_number, current_state);
 }
 
 void pinSet() {
@@ -173,20 +197,21 @@ void pwm() {
   static boolean flag = true;
   String pwm_number = sCmd.next();
   String pwm_pin = sCmd.next();
-  String viget_name = sCmd.next();
-  viget_name.replace("#", " ");
+  String widget_name = sCmd.next();
+  widget_name.replace("#", " ");
   String page_name = sCmd.next();
   String start_state = sCmd.next();
   String page_number = sCmd.next();
 
 
   uint8_t pwm_pin_int = pwm_pin.toInt();
-  jsonWrite(optionJson, "pwm_pin" + pwm_number, pwm_pin);
+  jsonWriteStr(configOptionJson, "pwm_pin" + pwm_number, pwm_pin);
   pinMode(pwm_pin_int, INPUT);
   analogWrite(pwm_pin_int, start_state.toInt());
-  jsonWrite(configJson, "pwmSet" + pwm_number, start_state);
+  //analogWriteFreq(32000);
+  jsonWriteStr(configLiveJson, "pwm" + pwm_number, start_state);
 
-  createViget (viget_name, page_name, page_number, "vigets/viget.range.json", "pwmSet" + pwm_number);
+  createWidget (widget_name, page_name, page_number, "widgets/widget.range.json", "pwm" + pwm_number);
 }
 
 void pwmSet() {
@@ -195,13 +220,13 @@ void pwmSet() {
   String pwm_state = sCmd.next();
   int pwm_state_int = pwm_state.toInt();
 
-  int pin = jsonReadtoInt(optionJson, "pwm_pin" + pwm_number);
+  int pin = jsonReadInt(configOptionJson, "pwm_pin" + pwm_number);
   analogWrite(pin, pwm_state_int);
 
-  eventGen ("pwmSet", pwm_number);
+  eventGen ("pwm", pwm_number);
 
-  jsonWrite(configJson, "pwmSet" + pwm_number, pwm_state);
-  sendSTATUS("pwmSet" + pwm_number, pwm_state);
+  jsonWriteStr(configLiveJson, "pwm" + pwm_number, pwm_state);
+  sendSTATUS("pwm" + pwm_number, pwm_state);
 }
 //==================================================================================================================
 //==========================================Модуль физической кнопки================================================
@@ -224,15 +249,15 @@ void handleButton()  {
     buttons[switch_number].update();
     if (buttons[switch_number].fell()) {
 
-      eventGen ("switchSet", String(switch_number));
+      eventGen ("switch", String(switch_number));
 
-      jsonWrite(configJson, "switchSet" + String(switch_number), "1");
+      jsonWriteStr(configLiveJson, "switch" + String(switch_number), "1");
     }
     if (buttons[switch_number].rose()) {
 
-      eventGen ("switchSet", String(switch_number));
+      eventGen ("switch", String(switch_number));
 
-      jsonWrite(configJson, "switchSet" + String(switch_number), "0");
+      jsonWriteStr(configLiveJson, "switch" + String(switch_number), "0");
     }
   }
   switch_number++;
@@ -244,49 +269,50 @@ void handleButton()  {
 void inputDigit() {
   String value_name = sCmd.next();
   String number = value_name.substring(5);
-  String viget_name = sCmd.next();
-  viget_name.replace("#", " ");
+  String widget_name = sCmd.next();
+  widget_name.replace("#", " ");
   String page_name = sCmd.next();
   page_name.replace("#", " ");
   String start_state = sCmd.next();
   String page_number = sCmd.next();
-  jsonWrite(configJson, "digitSet" + number, start_state);
-  createViget (viget_name, page_name, page_number, "vigets/viget.inputNum.json", "digitSet" + number);
+  jsonWriteStr(configLiveJson, "digit" + number, start_state);
+  createWidget (widget_name, page_name, page_number, "widgets/widget.inputNum.json", "digit" + number);
 }
 void digitSet() {
   String number = sCmd.next();
   String value = sCmd.next();
-  jsonWrite(configJson, "digitSet" + number, value);
-  sendSTATUS("digitSet" + number, value);
+  jsonWriteStr(configLiveJson, "digit" + number, value);
+  sendSTATUS("digit" + number, value);
 }
 //=====================================================================================================================================
 //=========================================Добавление окна ввода времени===============================================================
 void inputTime() {
   String value_name = sCmd.next();
   String number = value_name.substring(4);
-  String viget_name = sCmd.next();
-  viget_name.replace("#", " ");
+  String widget_name = sCmd.next();
+  widget_name.replace("#", " ");
   String page_name = sCmd.next();
   page_name.replace("#", " ");
   String start_state = sCmd.next();
   String page_number = sCmd.next();
-  jsonWrite(configJson, "timeSet" + number, start_state);
-  createViget (viget_name, page_name, page_number, "vigets/viget.inputTime.json", "timeSet" + number);
+  jsonWriteStr(configLiveJson, "time" + number, start_state);
+  createWidget (widget_name, page_name, page_number, "widgets/widget.inputTime.json", "time" + number);
 }
 void timeSet() {
   String number = sCmd.next();
   String value = sCmd.next();
-  jsonWrite(configJson, "timeSet" + number, value);
-  sendSTATUS("timeSet" + number, value);
+  jsonWriteStr(configLiveJson, "time" + number, value);
+  sendSTATUS("time" + number, value);
 }
 
 void handle_time_init() {
   ts.add(TIME, 1000, [&](void*) {
 
     String tmp = GetTime();
+    jsonWriteStr(configLiveJson, "time", tmp);
     tmp.replace(":", "-");
-    jsonWrite(configJson, "timenowSet", tmp);
-    eventGen ("timenowSet", "");
+    jsonWriteStr(configLiveJson, "timenow", tmp);
+    eventGen ("timenow", "");
 
   }, nullptr, true);
 }
@@ -296,11 +322,11 @@ void handle_time_init() {
 void text() {
 
   String number = sCmd.next();
-  String viget_name = sCmd.next();
+  String widget_name = sCmd.next();
   String page_name = sCmd.next();
   String page_number = sCmd.next();
 
-  createViget (viget_name, page_name, page_number, "vigets/viget.anydata.json", "textSet" + number);
+  createWidget (widget_name, page_name, page_number, "widgets/widget.anyData.json", "text" + number);
 }
 
 
@@ -318,70 +344,178 @@ void textSet() {
     text = text + " " + GetDataDigital() + " " + time;
   }
 
-  jsonWrite(configJson, "textSet" + number, text);
-  sendSTATUS("textSet" + number, text);
+  jsonWriteStr(configLiveJson, "text" + number, text);
+  sendSTATUS("text" + number, text);
+}
+//=====================================================================================================================================
+//=========================================Модуль шагового мотора======================================================================
+#ifdef stepper_enable
+//stepper 1 12 13
+void stepper() {
+  String stepper_number = sCmd.next();
+  String pin_step = sCmd.next();
+  String pin_dir = sCmd.next();
+
+  jsonWriteStr(configOptionJson, "stepper" + stepper_number, pin_step + " " + pin_dir);
+  pinMode(pin_step.toInt(), OUTPUT);
+  pinMode(pin_dir.toInt(), OUTPUT);
 }
 
-
+//stepperSet 1 100 5
+void stepperSet() {
+  String stepper_number = sCmd.next();
+  String steps = sCmd.next();
+  jsonWriteStr(configOptionJson, "steps" + stepper_number, steps);
+  String stepper_speed = sCmd.next();
+  String pin_step = selectToMarker (jsonReadStr(configOptionJson, "stepper" + stepper_number), " ");
+  String pin_dir =  deleteBeforeDelimiter (jsonReadStr(configOptionJson, "stepper" + stepper_number), " ");
+  Serial.println(pin_step);
+  Serial.println(pin_dir);
+  if (steps.toInt() > 0) digitalWrite(pin_dir.toInt(), HIGH);
+  if (steps.toInt() < 0) digitalWrite(pin_dir.toInt(), LOW);
+  if (stepper_number == "1") {
+    ts.add(STEPPER1, stepper_speed.toInt(), [&](void*) {
+      int steps_int = abs(jsonReadInt(configOptionJson, "steps1") * 2);
+      static int count;
+      count++;
+      String pin_step = selectToMarker (jsonReadStr(configOptionJson, "stepper1"), " ");
+      digitalWrite(pin_step.toInt(), !digitalRead(pin_step.toInt()));
+      yield();
+      if (count > steps_int) {
+        digitalWrite(pin_step.toInt(), LOW);
+        ts.remove(STEPPER1);
+        count = 0;
+      }
+    }, nullptr, true);
+  }
+  if (stepper_number == "2") {
+    ts.add(STEPPER2, stepper_speed.toInt(), [&](void*) {
+      int steps_int = abs(jsonReadInt(configOptionJson, "steps2") * 2);
+      static int count;
+      count++;
+      String pin_step = selectToMarker (jsonReadStr(configOptionJson, "stepper2"), " ");
+      digitalWrite(pin_step.toInt(), !digitalRead(pin_step.toInt()));
+      yield();
+      if (count > steps_int) {
+        digitalWrite(pin_step.toInt(), LOW);
+        ts.remove(STEPPER2);
+        count = 0;
+      }
+    }, nullptr, true);
+  }
+}
+#endif
 //====================================================================================================================================================
-/*
-  void inputText() {
-  String number = sCmd.next();
-  String viget_name = sCmd.next();
-  viget_name.replace("#", " ");
-  String page_name = sCmd.next();
-  page_name.replace("#", " ");
+//=================================================================Сервоприводы=======================================================================
+#ifdef servo_enable
+//servo 1 13 50 Мой#сервопривод Сервоприводы 0 100 0 180 2
+void servo_() {
+  String servo_number = sCmd.next();
+  String servo_pin = sCmd.next();
   String start_state = sCmd.next();
+  int start_state_int = start_state.toInt();
+  String widget_name = sCmd.next();
+  String page_name = sCmd.next();
+
+  String min_value = sCmd.next();
+  String max_value = sCmd.next();
+
+  String min_deg = sCmd.next();
+  String max_deg = sCmd.next();
+
   String page_number = sCmd.next();
-  jsonWrite(configJson, "inputTextSet" + number, start_state);
-  createViget (viget_name, page_name, page_number, "vigets/viget.inputText.json", "inputTextSet" + number);
-  }
-  void inputTextSet() {
-  String number = sCmd.next();
-  String value = sCmd.next();
-  jsonWrite(configJson, "inputTextSet" + number, value);
-  sendSTATUS("inputTextSet" + number, value);
+
+  jsonWriteStr(configOptionJson, "servo_pin" + servo_number, servo_pin);
+  start_state_int = map(start_state_int, min_value.toInt(), max_value.toInt(), min_deg.toInt(), max_deg.toInt());
+
+  if (servo_number == "1") {
+#ifdef ESP8266
+    myServo1.attach(servo_pin.toInt());
+    myServo1.write(start_state_int);
+#endif
+#ifdef ESP32
+    myServo1.attach(servo_pin.toInt(), 500, 2400);
+    myServo1.write(start_state_int);
+#endif
   }
 
-  void inputTime() {
-  String number = sCmd.next();
-  String viget_name = sCmd.next();
-  viget_name.replace("#", " ");
-  String page_name = sCmd.next();
-  page_name.replace("#", " ");
-  String start_state = sCmd.next();
-  String page_number = sCmd.next();
-  jsonWrite(configJson, "inputTimeSet" + number, start_state);
-  createViget (viget_name, page_name, page_number, "vigets/viget.inputTime.json", "inputTimeSet" + number);
-  }
-  void inputTimeSet() {
-  String number = sCmd.next();
-  String value = sCmd.next();
-  value.replace(":", ".");
-  jsonWrite(configJson, "inputTimeSet" + number, value);
-  value.replace(".", ":");
-  sendSTATUS("inputTimeSet" + number, value);
+  if (servo_number == "2") {
+#ifdef ESP8266
+    myServo2.attach(servo_pin.toInt());
+    myServo2.write(start_state_int);
+#endif
+#ifdef ESP32
+    myServo2.attach(servo_pin.toInt(), 500, 2400);
+    myServo2.write(start_state_int);
+#endif
   }
 
+  jsonWriteStr(configOptionJson, "s_min_val" + servo_number, min_value);
+  jsonWriteStr(configOptionJson, "s_max_val" + servo_number, max_value);
+  jsonWriteStr(configOptionJson, "s_min_deg" + servo_number, min_deg);
+  jsonWriteStr(configOptionJson, "s_max_deg" + servo_number, max_deg);
 
-  void inputDate() {
-  String number = sCmd.next();
-  String viget_name = sCmd.next();
-  viget_name.replace("#", " ");
-  String page_name = sCmd.next();
-  page_name.replace("#", " ");
-  String start_state = sCmd.next();
-  String page_number = sCmd.next();
-  jsonWrite(configJson, "inputDateSet" + number, start_state);
-  createViget (viget_name, page_name, page_number, "vigets/viget.inputDate.json", "inputDateSet" + number);
+  jsonWriteStr(configLiveJson, "servo" + servo_number, start_state);
+
+  createWidgetParam (widget_name, page_name, page_number, "widgets/widget.range.json", "servo" + servo_number, "min", min_value, "max", max_value, "k", "1");
+}
+
+void servoSet() {
+  String servo_number = sCmd.next();
+  String servo_state = sCmd.next();
+  int servo_state_int = servo_state.toInt();
+
+  int pin = jsonReadInt(configOptionJson, "servo_pin" + servo_number);
+
+  servo_state_int = map(servo_state_int,
+                        jsonReadInt(configOptionJson, "s_min_val" + servo_number),
+                        jsonReadInt(configOptionJson, "s_max_val" + servo_number),
+                        jsonReadInt(configOptionJson, "s_min_deg" + servo_number),
+                        jsonReadInt(configOptionJson, "s_max_deg" + servo_number));
+
+  if (servo_number == "1") {
+#ifdef ESP8266
+    myServo1.write(servo_state_int);
+#endif
+#ifdef ESP32
+    myServo1.write(servo_state_int);
+#endif
   }
-  void inputDateSet() {
-  String number = sCmd.next();
-  String value = sCmd.next();
-  jsonWrite(configJson, "inputDateSet" + number, value);
-  sendSTATUS("inputDateSet" + number, value);
+
+  if (servo_number == "2") {
+#ifdef ESP8266
+    myServo2.write(servo_state_int);
+#endif
+#ifdef ESP32
+    myServo2.write(servo_state_int);
+#endif
   }
-*/
+
+  //Serial.println(servo_state_int);
+
+  eventGen ("servo", servo_number);
+
+  jsonWriteStr(configLiveJson, "servo" + servo_number, servo_state);
+  sendSTATUS("servo" + servo_number, servo_state);
+}
+#endif
+//====================================================================================================================================================
+//===================================================================================serial===========================================================
+#ifdef serial_enable
+void serialBegin() {
+  //String s_speed = sCmd.next();
+  //String rxPin = sCmd.next();
+  //String txPin = sCmd.next();
+  //SoftwareSerial mySerial(rxPin.toInt(), txPin.toInt());
+  //mySerial.begin(s_speed.toInt());
+}
+
+void serialWrite() {
+  //String text = sCmd.next();
+  //mySerial.println(text);
+}
+#endif
+//====================================================================================================================================================
 //=================================================Глобальные команды удаленного управления===========================================================
 
 void mqttOrderSend() {
@@ -389,11 +523,11 @@ void mqttOrderSend() {
   String id = sCmd.next();
   String order = sCmd.next();
 
-  String  all_line = prefix + "/" + id + "/order";
+  String  all_line = jsonReadStr(configSetupJson, "mqttPrefix") + "/" + id + "/order";
   //Serial.print(all_line);
   //Serial.print("->");
   //Serial.println(order);
-  int send_status = client.publish (all_line.c_str(), order.c_str(), false);
+  int send_status = client_mqtt.publish (all_line.c_str(), order.c_str(), false);
 }
 
 void httpOrderSend() {
@@ -405,7 +539,17 @@ void httpOrderSend() {
   getURL(url);
 }
 
+void update_firmware() {
+  upgrade = true;
+}
 
+void firmware() {
+  String widget_name = sCmd.next();
+  String page_name = sCmd.next();
+  String page_number = sCmd.next();
+  jsonWriteStr(configLiveJson, "firm1", firmware_version);
+  choose_widget_and_create(widget_name, page_name, page_number, "any-data", "firm1");
+}
 
 //==============================================================================================================================
 //============================выполнение команд (в лупе) по очереди из строки order=============================================
@@ -420,29 +564,11 @@ void handleCMD_loop() {
   }
 }
 
-//=============================выполнение команд (через период) по очереди из строки order=======================================
-/*void handleCMD_ticker() {
-
-  ts.add(CMD, CMD_update_int, [&](void*) {
-    if (!busy) {
-      if (order_ticker != "") {
-
-        String tmp = selectToMarker(order_ticker, ",");                //выделяем из страки order первую команду pus title body
-        if (tmp != "no_command") sCmd.readStr(tmp);                                             //выполняем первую команду
-        Serial.println("order_ticker => " + order_ticker);
-        order_ticker = deleteBeforeDelimiter(order_ticker, ",");       //осекаем выполненную команду
-      }
-    }
-  }, nullptr, true);
-  }*/
-
-
-
 //=======================================================================================================================================
 //=======================================================================================================================================
 void txtExecution(String file) {
 
-  String command_all = readFile(file, 2048) + "\r\n";  //2048
+  String command_all = readFile(file, 2048) + "\r\n";
 
   command_all.replace("\r\n", "\n");
   command_all.replace("\r", "\n");
@@ -450,153 +576,24 @@ void txtExecution(String file) {
   while (command_all.length() != 0) {
 
     String tmp = selectToMarker (command_all, "\n");
-    //if (tmp.indexOf("//") < 0)
     sCmd.readStr(tmp);
     command_all = deleteBeforeDelimiter(command_all, "\n");
   }
+  command_all = "";
 }
+
 void stringExecution(String str) {
 
-  String command_all = str + "\r\n";  //"\r\n"
+  str = str + "\r\n";
 
-  command_all.replace("\r\n", "\n");
-  command_all.replace("\r", "\n");
+  str.replace("\r\n", "\n");
+  str.replace("\r", "\n");
 
-  while (command_all.length() != 0) {
+  while (str.length() != 0) {
 
-    String tmp = selectToMarker (command_all, "\n");
-    //if (tmp.indexOf("//") < 0)
+    String tmp = selectToMarker (str, "\n");
     sCmd.readStr(tmp);
-    command_all = deleteBeforeDelimiter(command_all, "\n");
+
+    str = deleteBeforeDelimiter(str, "\n");
   }
 }
-
-//======================================================================================================================
-//===============================================Создание виджетов=======================================================
-
-void createViget (String viget_name, String  page_name, String page_number, String file, String topic) {
-
-  String viget;
-  viget = readFile(file, 1024);
-
-  if (viget == "Failed") return;
-  if (viget == "Large") return;
-
-  viget_name.replace("#", " ");
-  page_name.replace("#", " ");
-
-  jsonWrite(viget, "page", page_name);
-  jsonWrite(viget, "order", page_number);
-  jsonWrite(viget, "descr", viget_name);
-  jsonWrite(viget, "topic", prex + "/" + topic);
-  all_vigets += viget + "\r\n";
-  viget = "";
-}
-
-/*
-  void createViget (String viget_name, String  page_name, String page_number, String file, String topic, String key, String value) {
-
-  String viget;
-  viget = readFile(file, 1024);
-
-  if (viget == "Failed") return;
-  if (viget == "Large") return;
-
-  viget_name.replace("#", " ");
-  page_name.replace("#", " ");
-
-  value.replace("#", " ");
-
-  viget = vidgetConfigWrite(viget, key, value);
-
-  jsonWrite(viget, "page", page_name);
-  jsonWrite(viget, "pageId", page_number);
-  jsonWrite(viget, "descr", viget_name);
-  jsonWrite(viget, "topic", prex + "/" + topic);
-
-  all_vigets += viget + "\r\n";
-  viget = "";
-  }
-
-  void createViget (String viget_name, String  page_name, String page_number, String file, String topic, String key, String value, String key2, String value2) {
-
-  String viget;
-  viget = readFile(file, 1024);
-
-  if (viget == "Failed") return;
-  if (viget == "Large") return;
-
-  viget_name.replace("#", " ");
-  page_name.replace("#", " ");
-
-  value.replace("#", " ");
-
-  viget = vidgetConfigWrite(viget, key, value);
-  viget = vidgetConfigWrite(viget, key2, value2);
-
-  jsonWrite(viget, "page", page_name);
-  jsonWrite(viget, "pageId", page_number);
-  jsonWrite(viget, "descr", viget_name);
-  jsonWrite(viget, "topic", prex + "/" + topic);
-
-  all_vigets += viget + "\r\n";
-  viget = "";
-  }
-*/
-String vidgetConfigWrite(String viget, String key, String value) {
-
-  if (viget == "") return "";
-  if (viget == "{}") return "";
-  int psn1 = viget.indexOf("{");
-  if (psn1 != -1) {
-    psn1 = viget.indexOf("{", psn1 + 1);
-    if (psn1 != -1) {
-      int psn2 = viget.indexOf("}", psn1);
-      String WigetConfig = viget.substring(psn1, psn2) + "}";
-      jsonWrite(WigetConfig, key, value);
-      String part1 = viget.substring(0, psn1);
-      viget = part1 + WigetConfig + "}";
-      return viget;
-
-    }
-  }
-}
-
-
-
-
-
-
-
-
-
-
-
-
-//============разное
-
-/*
-  void delAlert() {
-
-  String alert_id = sCmd.next();
-  delViget(alert_id);
-  sendAllWigets();
-  }
-
-
-  void delViget(String text_in_viget) {
-  String viget = all_vigets;
-  while (viget.length() != 0) {
-    String tmp = selectToMarkerPlus (viget, "\r\n", 2);
-    if (tmp.indexOf(text_in_viget) > 0) {
-
-      all_vigets.replace(tmp, "");
-      //Serial.println(all_vigets);
-
-      viget = deleteBeforeDelimiter(viget, "\r\n");
-    } else {
-      viget = deleteBeforeDelimiter(viget, "\r\n");
-    }
-  }
-  }
-*/

FS.ino

@@ -0,0 +1,38 @@
+void File_system_init() {
+  
+  Serial.begin(115200);
+  //Serial.setDebugOutput(true);
+  Serial.println("--------------started----------------");
+  //--------------------------------------------------------------
+  SPIFFS.begin();
+  configSetupJson = readFile("config.json", 4096);
+  configSetupJson.replace(" ", "");
+  configSetupJson.replace("\r\n", "");
+  Serial.println(configSetupJson);
+  //jsonWriteStr(configLiveJson, "name", jsonReadStr(configSetupJson, "name"));
+  //jsonWriteStr(configLiveJson, "lang", jsonReadStr(configSetupJson, "lang"));
+  
+
+#ifdef ESP32
+  uint32_t chipID_u = ESP.getEfuseMac();
+  chipID = String(chipID_u);
+  jsonWriteStr(configSetupJson, "chipID", chipID);
+#endif
+
+#ifdef ESP8266
+  chipID = String( ESP.getChipId() ) + "-" + String(ESP.getFlashChipId());
+  jsonWriteStr(configSetupJson, "chipID", chipID);
+  Serial.setDebugOutput(0);
+#endif
+
+  jsonWriteStr(configSetupJson, "firmware_version", firmware_version);
+
+  prex = jsonReadStr(configSetupJson, "mqttPrefix") + "/" + chipID;
+  Serial.println(chipID);
+  
+}
+
+void get_esp_info() {
+
+  
+}

Init.ino

@@ -1,30 +1,4 @@
 void All_init() {
-
-  server.on("/all_modules_init", HTTP_GET, [](AsyncWebServerRequest * request) {
-    Device_init();
-    request->send(200, "text/text", "OK"); // отправляем ответ о выполнении
-  });
-
-  server.on("/scenario", HTTP_GET, [](AsyncWebServerRequest * request) {
-    if (request->hasArg("status")) {
-      jsonWrite(configSetup, "scenario", request->getParam("status")->value());
-    }
-    saveConfig();
-    Scenario_init();
-    request->send(200, "text/text", "OK"); // отправляем ответ о выполнении
-  });
-
-  server.on("/cleanlog", HTTP_GET, [](AsyncWebServerRequest * request) {
-    SPIFFS.remove("/log.analog.txt");
-    SPIFFS.remove("/log.dallas.txt");
-    SPIFFS.remove("/log.level.txt");
-    SPIFFS.remove("/log.ph.txt");
-    SPIFFS.remove("/log.txt");
-    request->send(200, "text/text", "OK"); // отправляем ответ о выполнении
-  });
-
-  prsets_init();
-
   Device_init();
   Scenario_init();
   Timer_countdown_init();
@@ -32,222 +6,94 @@ void All_init() {
 
 void Device_init() {
 
-  //SENSORS-SECTION
-  ts.remove(ANALOG_);
-  ts.remove(LEVEL);
-  ts.remove(DALLAS);
-  ts.remove(DHTT);
-  ts.remove(DHTH);
-  //================
+  logging_value_names_list = "";
+  enter_to_logging_counter = LOG1 - 1;
 
-  all_vigets = "";
-  txtExecution("firmware.config.txt");
+  analog_value_names_list = "";
+  enter_to_analog_counter = 0;
+
+  level_value_name = "";
+
+  dhtT_value_name = "";
+  dhtH_value_name = "";
+
+  bmp280T_value_name = "";
+  bmp280P_value_name = "";
+
+  bme280T_value_name = "";
+  bme280P_value_name = "";
+  bme280H_value_name = "";
+  bme280A_value_name = "";
+
+  int array_sz = sizeof(sensors_reading_map) / sizeof(sensors_reading_map[0]);
+
+  for (int i = 0; i <= array_sz; i++) {
+    sensors_reading_map[i] = 0;
+  }
+
+  for (int i = LOG1; i <= LOG5; i++) {
+    ts.remove(i);
+  }
+
+#ifdef layout_in_ram
+  all_widgets = "";
+#else
+  SPIFFS.remove("/layout.txt");
+#endif
+
+  txtExecution("firmware.c.txt");
   //outcoming_date();
 }
 //-------------------------------сценарии-----------------------------------------------------
 
 void Scenario_init() {
-  if (jsonRead(configSetup, "scenario") == "1") {
-    scenario = readFile("firmware.scenario.txt", 2048);
+  if (jsonReadStr(configSetupJson, "scen") == "1") {
+    scenario = readFile("firmware.s.txt", 2048);
   }
 }
 
-void prsets_init() {
-
-  //part 1===============================================================================
-
-  server.on("/relay", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/relay.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/relay.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    String tmp = "";
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/relay_timer", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/relay_t.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/relay_t.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/relay_countdown", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/relay_c.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/relay_c.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/relay_several", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/relay_s.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/relay_s.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/relay_switch", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/relay_sw.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/relay_sw.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/relay_button_remote", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/relay_br.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/relay_br.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/relay_switch_remote", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/relay_sr.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/relay_sr.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-   server.on("/pwm", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/pwm.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/pwm.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  //part 2===============================================================================
-
-  server.on("/dht11", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/dht11.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/dht11.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/dht22", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/dht22.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/dht22.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/analog", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/analog.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/analog.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/dallas", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/dallas.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/dallas.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/termostat", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/termostat.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/termostat.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/level", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/level.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/level.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/moution_relay", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/moution_r.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/moution_r.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-  server.on("/moution_security", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/moution_s.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/moution_s.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
-
-
-  //default===============================================================================
-
-  server.on("/default", HTTP_GET, [](AsyncWebServerRequest * request) {
-    writeFile("firmware.config.txt", readFile("configs/firmware.config.txt", 2048));
-    writeFile("firmware.scenario.txt", readFile("configs/firmware.scenario.txt", 2048));
-    Device_init();
-    Scenario_init();
-    request->redirect("/page.htm?configuration");
-  });
+void uptime_init() {
+  ts.add(UPTIME, 5000, [&](void*) {
+    handle_uptime();
+  }, nullptr, true);
+  ts.add(STATISTICS, statistics_update, [&](void*) {
+    handle_statistics();
+  }, nullptr, true);
 }
 
-void up_time() {
-  uint32_t ss = millis() / 1000;
-  uint32_t mm = ss / 60;
-  uint32_t hh = mm / 60;
-  uint32_t dd = hh / 24;
-
-  String out = "";
-
-  if (ss != 0) {
-    out = "[i] uptime = " + String(ss) + " sec";
-    jsonWrite(configJson, "uptime", String(ss) + " sec");
+void handle_uptime() {
+  if (myUpTime.check()) {
+    jsonWriteStr(configSetupJson, "uptime", uptime_as_string());
   }
-  if (mm != 0) {
-    out = "[i] uptime = " + String(mm) + " min";
-    jsonWrite(configJson, "uptime", String(mm) + " min");
-  }
-  if (hh != 0) {
-    out = "[i] uptime = " + String(hh) + " hours";
-    jsonWrite(configJson, "uptime", String(hh) + " hours");
-  }
-  if (dd != 0) {
-    out = "[i] uptime = " + String(dd) + " days";
-    jsonWrite(configJson, "uptime", String(dd) + " days");
-  }
-  Serial.println(out + ", mqtt_lost_error: " + String(mqtt_lost_error) + ", wifi_lost_error: " + String(wifi_lost_error));
 }
 
-void statistics() {
-  String urls = "http://backup.privet.lv/visitors/?";
-
-  urls += WiFi.macAddress().c_str();
-  urls += "&";
-
+void handle_statistics() {
+  if (WiFi.status() == WL_CONNECTED) {
+    String urls = "http://backup.privet.lv/visitors/?";
+    //-----------------------------------------------------------------
+    urls += WiFi.macAddress().c_str();
+    urls += "&";
+    //-----------------------------------------------------------------
 #ifdef ESP8266
-  urls += "iot-manager_esp8266";
+    urls += "iot-manager_esp8266";
 #endif
 #ifdef ESP32
-  urls += "iot-manager_esp32";
+    urls += "iot-manager_esp32";
 #endif
-  urls += "&";
-
+    urls += "&";
+    //-----------------------------------------------------------------
 #ifdef ESP8266
-  urls += ESP.getResetReason();
+    urls += ESP.getResetReason();
+    //Serial.println(ESP.getResetReason());
 #endif
 #ifdef ESP32
-  urls += "unknow";
+    urls += "Power on";
 #endif
-  urls += "&";
-
-  urls += DATE_COMPILING;
-  String stat = getURL(urls);
+    urls += "&";
+    //-----------------------------------------------------------------
+    urls += "ver: " + firmware_version;
+    //-----------------------------------------------------------------
+    String stat = getURL(urls);
+    //Serial.println(stat);
+  }
 }

Logging.ino

@@ -0,0 +1,153 @@
+#ifdef logging_enable
+//===============================================Логирование============================================================
+//logging temp1 1 10 Температура Датчики 2
+void logging() {
+  String value_name = sCmd.next();
+  String period_min = sCmd.next();
+  String maxCount = sCmd.next();
+  String widget_name = sCmd.next();
+  widget_name.replace("#", " ");
+  String page_name = sCmd.next();
+  String page_number = sCmd.next();
+  logging_value_names_list += value_name + ",";
+  enter_to_logging_counter++; //считаем количество входов в эту функцию
+  jsonWriteStr(configOptionJson, value_name + "_c", maxCount); //создаем в файловой системе переменную количества точек на графике с отметкой _c что значит count
+  createChart (widget_name, page_name, page_number, "widgets/widget.chart.json", value_name + "_ch", maxCount); //создаем график в приложении с топиком _ch /prefix/3234045-1589487/value_name_ch
+  if (enter_to_logging_counter == LOG1) {
+    ts.add(LOG1, period_min.toInt() * 1000 * 60, [&](void*) {
+      String tmp_buf_1 = selectFromMarkerToMarker(logging_value_names_list, ",", 0);
+      deleteOldDate("log." + tmp_buf_1 + ".txt",  jsonReadInt(configOptionJson, tmp_buf_1 + "_c"), jsonReadStr(configLiveJson, tmp_buf_1));
+      Serial.println("[i] LOGGING for sensor '" + tmp_buf_1 + "' done");
+    }, nullptr, false);
+  }
+  if (enter_to_logging_counter == LOG2) {
+    ts.add(LOG2, period_min.toInt() * 1000 * 60, [&](void*) {
+      String tmp_buf_2 = selectFromMarkerToMarker(logging_value_names_list, ",", 1);
+      deleteOldDate("log." + tmp_buf_2 + ".txt",  jsonReadInt(configOptionJson, tmp_buf_2 + "_c"), jsonReadStr(configLiveJson, tmp_buf_2));
+      Serial.println("[i] LOGGING for sensor '" + tmp_buf_2 + "' done");
+    }, nullptr, false);
+  }
+  if (enter_to_logging_counter == LOG3) {
+    ts.add(LOG3, period_min.toInt() * 1000 * 60, [&](void*) {
+      String tmp_buf_3 = selectFromMarkerToMarker(logging_value_names_list, ",", 2);
+      deleteOldDate("log." + tmp_buf_3 + ".txt",  jsonReadInt(configOptionJson, tmp_buf_3 + "_c"), jsonReadStr(configLiveJson, tmp_buf_3));
+      Serial.println("[i] LOGGING for sensor '" + tmp_buf_3 + "' done");
+    }, nullptr, false);
+  }
+  if (enter_to_logging_counter == LOG4) {
+    ts.add(LOG4, period_min.toInt() * 1000 * 60, [&](void*) {
+      String tmp_buf_4 = selectFromMarkerToMarker(logging_value_names_list, ",", 3);
+      deleteOldDate("log." + tmp_buf_4 + ".txt",  jsonReadInt(configOptionJson, tmp_buf_4 + "_c"), jsonReadStr(configLiveJson, tmp_buf_4));
+      Serial.println("[i] LOGGING for sensor '" + tmp_buf_4 + "' done");
+    }, nullptr, false);
+  }
+  if (enter_to_logging_counter == LOG5) {
+    ts.add(LOG5, period_min.toInt() * 1000 * 60, [&](void*) {
+      String tmp_buf_5 = selectFromMarkerToMarker(logging_value_names_list, ",", 4);
+      deleteOldDate("log." + tmp_buf_5 + ".txt",  jsonReadInt(configOptionJson, tmp_buf_5 + "_c"), jsonReadStr(configLiveJson, tmp_buf_5));
+      Serial.println("[i] LOGGING for sensor '" + tmp_buf_5 + "' done");
+    }, nullptr, false);
+  }
+}
+
+//=========================================Удаление стрых данных и запись новых==================================================================
+void deleteOldDate(String file, int seted_number_of_lines, String date_to_add) {
+  String log_date = readFile(file, 5000);
+  int current_number_of_lines = count(log_date, "\r\n");
+  Serial.println("=====> [i] in log file " + file + " " + current_number_of_lines + " lines");
+
+  if (current_number_of_lines > seted_number_of_lines + 1) {
+    SPIFFS.remove("/" + file);
+    current_number_of_lines = 0;
+  }
+  if (current_number_of_lines == 0) {
+    SPIFFS.remove("/" + file);
+    current_number_of_lines = 0;
+  }
+  if (current_number_of_lines > seted_number_of_lines) {
+    log_date = deleteBeforeDelimiter(log_date, "\r\n");
+    if (GetTimeUnix() != "failed") {
+      log_date += GetTimeUnix() + " " +  date_to_add + "\r\n";
+      writeFile(file, log_date);
+    }
+  } else {
+    if (GetTimeUnix() != "failed") {
+      addFile(file, GetTimeUnix() + " " +  date_to_add);
+    }
+  }
+  log_date = "";
+}
+
+//=========================================Выбор какие данные отправлять==================================================================
+void choose_log_date_and_send() {
+  String all_line = logging_value_names_list;
+  while (all_line.length() != 0) {
+    String tmp = selectToMarker (all_line, ",");
+    sendLogData("log." + tmp + ".txt", tmp + "_ch");
+    all_line = deleteBeforeDelimiter(all_line, ",");
+  }
+  all_line = "";
+}
+//=========================================Отправка данных===================================================================================
+void sendLogData(String file, String topic) {
+  String log_date = readFile(file, 5000);
+  if (log_date != "Failed") {
+    log_date.replace("\r\n", "\n");
+    log_date.replace("\r", "\n");
+    String buf = "{}";
+    String json_array;
+    String unix_time;
+    String value;
+    while (log_date.length() != 0) {
+      String tmp = selectToMarker (log_date, "\n");
+      log_date = deleteBeforeDelimiter(log_date, "\n");
+      unix_time = selectToMarker (tmp, " ");
+      jsonWriteInt(buf, "x", unix_time.toInt());
+      value = deleteBeforeDelimiter(tmp, " ");
+      jsonWriteFloat(buf, "y1", value.toFloat());
+      if (log_date.length() < 3) {
+        json_array += buf;
+      } else {
+        json_array += buf + ",";
+      }
+      buf = "{}";
+    }
+    unix_time = "";
+    value = "";
+    log_date = "";
+    json_array = "{\"status\":[" + json_array + "]}";
+    Serial.println(json_array);
+    sendCHART(topic, json_array);
+    json_array = "";
+    getMemoryLoad("[i] after send log date");
+  }
+}
+
+/*
+  //----------------------------------------------
+    File configFile = SPIFFS.open("/" + file, "r");
+    if (!configFile) {
+      return;
+    }
+    configFile.seek(0, SeekSet); //поставим курсор в начало файла
+    while (configFile.position() != configFile.size()) {
+      String tmp = configFile.readStringUntil('\r\n');
+      String unix_time = selectToMarker (tmp, " ");
+      String value = deleteBeforeDelimiter(tmp, " ");
+      String final_line = "{\"status\":{\"x\":" + unix_time + ",\"y1\":" + value + "}}";
+      //Serial.println(final_line);
+      sendCHART(topic, final_line);
+    }
+    getMemoryLoad("[i] after send log date");
+*/
+//=========================================Очистка данных===================================================================================
+void clean_log_date() {
+  String all_line = logging_value_names_list;
+  while (all_line.length() != 0) {
+    String tmp = selectToMarker (all_line, ",");
+    SPIFFS.remove("/log." + tmp + ".txt");
+    all_line = deleteBeforeDelimiter(all_line, ",");
+  }
+  all_line = "";
+}
+#endif

README.md

@@ -0,0 +1,37 @@
+# esp32-esp8266_iot-manager_modules_firmware
+
+It is based on esp8266 and esp32 automation system. Each module has a web interface for its initial configuration. The modules are managed using the "iot manager" application. This application is released for both android and ios platform. The application connects to a MQTT broker, you can add several brokers and switch between them. All modules also connect to same broker. All esp8266 esp32 are combined and appear in the application as widgets.
+
+There are two configuration options in the web interface of the modules:
+
+1. Select a ready-made preset. 
+
+The following presets are available:
+
+- On off relay   
+- On off relay according to the schedule specified in the application   
+- On off the relay after a period of time specified in the application   
+- On off relay groups on different devices with one button in the application   
+- Light switch module   
+- PWM controlled by the slider in the application   
+- Reading and logging analog input into graph with scaling function   
+- Reading and logging in the graph of the following sensors:   
+
+DHT22, DHT33, DHT44, AM2302, RHT03
+DS18B20
+JSN-SR04T, HC-SR04, HY-SRF05
+BME280 BMP280 and other i2c sensors
+
+-ds18b20 termostat controlled from application with graph (you can use any sensor for termostat any other supported).
+
+2. Configure with special scripts. A simple programming language was invented which can very flexibly configure the module.
+
+People who do not know how to program can use ready-made presets (option 1), and people who want to play with the system can use scripts (option 2).
+
+Scenarios:
+
+The web interface has the ability to configure Scenarios. An event occurs on one esp, and a reaction to this event can setup to occurs on another.
+
+Logging of sensors data in this project made with out any server. All data for graf storring in esp flash. You can look any time your sensor history for 2 - 3 days or week in mobile app in graf.  And for this option needed only esp.
+
+

Scenario.ino

@@ -1,7 +1,7 @@
 void handleScenario() {
 
-  if (jsonRead(configSetup, "scenario") == "1") {
-    if ((jsonRead(optionJson, "scenario_status") != "")) {
+  if (jsonReadStr(configSetupJson, "scen") == "1") {
+    if ((jsonReadStr(configOptionJson, "scenario_status") != "")) {
       int i = 0;
       String str = scenario;                                                   //читаем переменную с сценариями (то что из файла на странице)
       str += "\n";
@@ -17,42 +17,38 @@ void handleScenario() {
           //Serial.println(i);
           String condition = selectToMarker (tmp, "\n");                        //выделяем первую строку самого сценария  button1 = 1 (условие)
           String param_name = selectFromMarkerToMarker(condition, " " , 0);
-          param_name = add_set(param_name);                                      //из первой страки берем имя параметра button1 и вставляем в него Set и получаем buttonSet1
-          if (param_name.indexOf("timenow") != -1){
-            param_name = param_name + "Set";
-          }
-          String order = jsonRead(optionJson, "scenario_status");                //читаем весь файл событий
+          String order = jsonReadStr(configOptionJson, "scenario_status");                //читаем весь файл событий
           String param = selectToMarker (order, ",");                            //читаем первое событие из файла событий
           if (param_name == param) {                                             //если поступившее событие равно событию заданному buttonSet1 в файле начинаем его обработку
 
             String sign = selectFromMarkerToMarker(condition, " " , 1);          //читаем знак  (=)
             String value = selectFromMarkerToMarker(condition, " " , 2);         //читаем значение (1)
             if (value.indexOf("digit") != -1) {
-              value = add_set(value);
-              value = jsonRead(configJson, value);
+              //  value = add_set(value);
+              value = jsonReadStr(configLiveJson, value);
             }
             if (value.indexOf("time") != -1) {
-              value = add_set(value);
-              value = jsonRead(configJson, value);
+              //  value = add_set(value);
+              value = jsonReadStr(configLiveJson, value);
             }
             boolean flag = false;                                                 //если одно из значений совпало то только тогда начинаем выполнять комнады
             if (sign == "=") {
-              if (jsonRead(configJson, param_name) == value) flag = true;
+              if (jsonReadStr(configLiveJson, param_name) == value) flag = true;
             }
             if (sign == "!=") {
-              if (jsonRead(configJson, param_name) != value) flag = true;
+              if (jsonReadStr(configLiveJson, param_name) != value) flag = true;
             }
             if (sign == "<") {
-              if (jsonRead(configJson, param_name).toInt() < value.toInt()) flag = true;
+              if (jsonReadStr(configLiveJson, param_name).toInt() < value.toInt()) flag = true;
             }
             if (sign == ">") {
-              if (jsonRead(configJson, param_name).toInt() > value.toInt()) flag = true;
+              if (jsonReadStr(configLiveJson, param_name).toInt() > value.toInt()) flag = true;
             }
             if (sign == ">=") {
-              if (jsonRead(configJson, param_name).toInt() >= value.toInt()) flag = true;
+              if (jsonReadStr(configLiveJson, param_name).toInt() >= value.toInt()) flag = true;
             }
             if (sign == "<=") {
-              if (jsonRead(configJson, param_name).toInt() <= value.toInt()) flag = true;
+              if (jsonReadStr(configLiveJson, param_name).toInt() <= value.toInt()) flag = true;
             }
 
             if (flag) {
@@ -67,9 +63,9 @@ void handleScenario() {
         str = deleteBeforeDelimiter(str, "end\n");                                     //удаляем первый сценарий
         //-----------------------------------------------------------------------------------------------------------------------
       }
-      String tmp2 = jsonRead(optionJson, "scenario_status");                           //читаем файл событий
+      String tmp2 = jsonReadStr(configOptionJson, "scenario_status");                           //читаем файл событий
       tmp2 = deleteBeforeDelimiter(tmp2, ",");                                         //удаляем выполненное событие
-      jsonWrite(optionJson, "scenario_status", tmp2);                                  //записываем обновленный файл событий
+      jsonWriteStr(configOptionJson, "scenario_status", tmp2);                                  //записываем обновленный файл событий
       i = 0;
     }
   }
@@ -77,10 +73,10 @@ void handleScenario() {
 
 void eventGen (String event_name, String number) {   //событие выглядит как имя плюс set плюс номер: button+Set+1
 
-  if (jsonRead(configSetup, "scenario") == "1") {
-    String tmp = jsonRead(optionJson, "scenario_status") ;    //генерирование события
+  if (jsonReadStr(configSetupJson, "scen") == "1") {
+    String tmp = jsonReadStr(configOptionJson, "scenario_status") ;    //генерирование события
     //Serial.println(event_name);
-    jsonWrite(optionJson, "scenario_status", tmp + event_name + number + ",");
+    jsonWriteStr(configOptionJson, "scenario_status", tmp + event_name + number + ",");
   }
 }
 

Sensors.ino

@@ -1,8 +1,108 @@
-//===============================================================================================================================
-//=========================================Модуль аналогового сенсора============================================================
+void sensors_init() {
+  ts.add(SENSORS, 1000, [&](void*) {
+    static int counter;
+    counter++;
+
+#ifdef level_enable
+    if (sensors_reading_map[0] == 1) level_reading();
+#endif
+
+    if (counter > 10) {
+      counter = 0;
+
+#ifdef analog_enable
+      if (sensors_reading_map[1] == 1) analog_reading1();
+      if (sensors_reading_map[2] == 1) analog_reading2();
+#endif
+
+#ifdef dallas_enable
+      if (sensors_reading_map[3] == 1) dallas_reading();
+#endif
+
+#ifdef dht_enable
+      if (sensors_reading_map[4] == 1) dhtT_reading();
+      if (sensors_reading_map[5] == 1) dhtH_reading();
+      if (sensors_reading_map[6] == 1) dhtP_reading();
+      if (sensors_reading_map[7] == 1) dhtC_reading();
+      if (sensors_reading_map[8] == 1) dhtD_reading();
+#endif
+
+#ifdef bmp_enable
+      if (sensors_reading_map[9] == 1) bmp280T_rading();
+      if (sensors_reading_map[10] == 1) bmp280P_reading();
+#endif     
+
+#ifdef bme_enable
+      if (sensors_reading_map[11] == 1) bme280T_reading();
+      if (sensors_reading_map[12] == 1) bme280P_reading();
+      if (sensors_reading_map[13] == 1) bme280H_reading();
+      if (sensors_reading_map[14] == 1) bme280A_reading();
+#endif 
+    }
+  }, nullptr, true);
+}
+
+//=========================================================================================================================================
+//=========================================Модуль измерения уровня в баке==================================================================
+#ifdef level_enable
+//level L 14 12 Вода#в#баке,#% Датчики fill-gauge 125 20 1
+void level() {
+  String value_name = sCmd.next();
+  String trig = sCmd.next();
+  String echo = sCmd.next();
+  String widget_name = sCmd.next();
+  String page_name = sCmd.next();
+  String type = sCmd.next();
+  String empty_level = sCmd.next();
+  String full_level = sCmd.next();
+  String page_number = sCmd.next();
+  level_value_name = value_name;
+  jsonWriteStr(configOptionJson, "e_lev", empty_level);
+  jsonWriteStr(configOptionJson, "f_lev", full_level);
+  jsonWriteStr(configOptionJson, "trig", trig);
+  jsonWriteStr(configOptionJson, "echo", echo);
+  pinMode(trig.toInt(), OUTPUT);
+  pinMode(echo.toInt(), INPUT);
+  choose_widget_and_create(widget_name, page_name, page_number, type, value_name);
+  sensors_reading_map[0] = 1;
+}
+
+void level_reading() {
+  long duration_;
+  int distance_cm;
+  int level;
+  static int counter;
+  int trig = jsonReadInt(configOptionJson, "trig");
+  int echo = jsonReadInt(configOptionJson, "echo");
+  digitalWrite(trig, LOW);
+  delayMicroseconds(2);
+  digitalWrite(trig, HIGH);
+  delayMicroseconds(10);
+  digitalWrite(trig, LOW);
+  duration_ = pulseIn(echo, HIGH, 30000); // 3000 µs = 50cm // 30000 µs = 5 m
+  distance_cm = duration_ / 29 / 2;
+  distance_cm = medianFilter.filtered(distance_cm);//отсечение промахов медианным фильтром
+  counter++;
+  if (counter > tank_level_times_to_send) {
+    counter = 0;
+    level = map(distance_cm,
+                jsonReadInt(configOptionJson, "e_lev"),
+                jsonReadInt(configOptionJson, "f_lev"), 0, 100);
+    jsonWriteInt(configLiveJson, level_value_name, level);
+    eventGen (level_value_name, "");
+    sendSTATUS(level_value_name, String(level));
+    Serial.println("[i] sensor '" + level_value_name + "' data: " + String(level));
+  }
+}
+#endif
+//=========================================================================================================================================
+//=========================================Модуль аналогового сенсора======================================================================
+#ifdef analog_enable
+//analog adc 0 Аналоговый#вход,#% Датчики any-data 1 1023 1 100 1
 void analog() {
+  String value_name = sCmd.next();
   String pin = sCmd.next();
-  String viget_name = sCmd.next();
+  String widget_name = sCmd.next();
   String page_name = sCmd.next();
   String type = sCmd.next();
   String analog_start = sCmd.next();
@@ -10,91 +110,67 @@ void analog() {
   String analog_start_out = sCmd.next();
   String analog_end_out = sCmd.next();
   String page_number = sCmd.next();
-  jsonWrite(optionJson, "analog_start", analog_start);
-  jsonWrite(optionJson, "analog_end", analog_end);
-  jsonWrite(optionJson, "analog_start_out", analog_start_out);
-  jsonWrite(optionJson, "analog_end_out", analog_end_out);
-  choose_viget_and_create(viget_name, page_name, page_number, type, "analog");
-  ts.add(ANALOG_, analog_update_int, [&](void*) {
-    static int analog_old;
+  analog_value_names_list += value_name + ",";
+  enter_to_analog_counter++;
+  jsonWriteStr(configOptionJson, value_name + "_st", analog_start);
+  jsonWriteStr(configOptionJson, value_name + "_end", analog_end);
+  jsonWriteStr(configOptionJson, value_name + "_st_out", analog_start_out);
+  jsonWriteStr(configOptionJson, value_name + "_end_out", analog_end_out);
+  choose_widget_and_create(widget_name, page_name, page_number, type, value_name);
+  if (enter_to_analog_counter == 1) {
+    sensors_reading_map[1] = 1;
+  }
+  if (enter_to_analog_counter == 2) {
+    sensors_reading_map[2] = 1;
+  }
+}
+
+void analog_reading1() {
+  String value_name = selectFromMarkerToMarker(analog_value_names_list, ",", 0);
 #ifdef ESP32
-    //int pin_int = pin.toInt();
-    int analog_in;// = analogRead(pin_int);
+  int analog_in = analogRead(34);
 #endif
 #ifdef ESP8266
-    int analog_in = analogRead(A0);
+  int analog_in = analogRead(A0);
 #endif
-    jsonWrite(configJson, "analog_in", analog_in);
-    int analog = map(analog_in,
-                     jsonReadtoInt(optionJson, "analog_start") ,
-                     jsonReadtoInt(optionJson, "analog_end"),
-                     jsonReadtoInt(optionJson, "analog_start_out"),
-                     jsonReadtoInt(optionJson, "analog_end_out"));
-    jsonWrite(configJson, "analog", analog);
-    // if (analog_old != analog) {
-    eventGen ("analog", "");
-    sendSTATUS("analog", String(analog));
-    if (client.connected()) {
-      Serial.println("[i] sensor 'analog' send date " + String(analog));
-    }
-    // }
-    analog_old = analog;
-  }, nullptr, true);
+  int analog = map(analog_in,
+                   jsonReadInt(configOptionJson, value_name + "_st") ,
+                   jsonReadInt(configOptionJson, value_name + "_end"),
+                   jsonReadInt(configOptionJson, value_name + "_st_out"),
+                   jsonReadInt(configOptionJson, value_name + "_end_out"));
+  jsonWriteInt(configLiveJson, value_name, analog);
+  eventGen (value_name, "");
+  sendSTATUS(value_name, String(analog));
+  Serial.println("[i] sensor '" + value_name + "' data: " + String(analog));
 }
 
-//===================================================================================================================================
-//=========================================Модуль измерения уровня в баке============================================================
-void level() {
-  String viget_name = sCmd.next();
-  String page_name = sCmd.next();
-  String type = sCmd.next();
-  String empty_level = sCmd.next();
-  String full_level = sCmd.next();
-  String page_number = sCmd.next();
-  jsonWrite(optionJson, "empty_level", empty_level);
-  jsonWrite(optionJson, "full_level", full_level);
-  pinMode(14, OUTPUT);
-  pinMode(12, INPUT);
-  choose_viget_and_create(viget_name, page_name, page_number, type, "level");
-  ts.add(LEVEL, tank_level_shooting_interval, [&](void*) {
-    long duration_;
-    int distance_cm;
-    int level;
-    static int level_old; //переменная static сохраняет свое значение между вызовами функции
-    static int counter;
-    digitalWrite(14, LOW);
-    delayMicroseconds(2);
-    digitalWrite(14, HIGH);
-    delayMicroseconds(10);
-    digitalWrite(14, LOW);
-    duration_ = pulseIn(12, HIGH, 30000); // 3000 µs = 50cm // 30000 µs = 5 m
-    distance_cm = duration_ / 29 / 2;
-    distance_cm = medianFilter.filtered(distance_cm);//отсечение промахов медианным фильтром
-    counter++;
-    if (counter > tank_level_times_to_send) {
-      counter = 0;
-      jsonWrite(configJson, "level_in", distance_cm);
-      level = map(distance_cm,
-                  jsonReadtoInt(optionJson, "empty_level"),
-                  jsonReadtoInt(optionJson, "full_level"), 0, 100);
-      jsonWrite(configJson, "level", level);
-      //if (level_old != level) {
-      eventGen ("level", "");
-      sendSTATUS("level", String(level));
-      if (client.connected()) {
-        Serial.println("[i] sensor tank 'level' send date " + String(level));
-      }
-      //}
-      level_old = level;
-    }
-  }, nullptr, true);
+void analog_reading2() {
+  String value_name = selectFromMarkerToMarker(analog_value_names_list, ",", 1);
+#ifdef ESP32
+  int analog_in = analogRead(35);
+#endif
+#ifdef ESP8266
+  int analog_in = analogRead(A0);
+#endif
+  int analog = map(analog_in,
+                   jsonReadInt(configOptionJson, value_name + "_st") ,
+                   jsonReadInt(configOptionJson, value_name + "_end"),
+                   jsonReadInt(configOptionJson, value_name + "_st_out"),
+                   jsonReadInt(configOptionJson, value_name + "_end_out"));
+  jsonWriteInt(configLiveJson, value_name, analog);
+  eventGen (value_name, "");
+  sendSTATUS(value_name, String(analog));
+  Serial.println("[i] sensor '" + value_name + "' data: " + String(analog));
 }
-
-//==========================================================================================================================================
-//=========================================Модуль температурного сенсора ds18b20============================================================
+#endif
+//=========================================================================================================================================
+//=========================================Модуль температурного сенсора ds18b20===========================================================
+#ifdef dallas_enable
 void dallas() {
+  String value_name = sCmd.next();
   String pin = sCmd.next();
-  String viget_name = sCmd.next();
+  String address = sCmd.next();
+  String widget_name = sCmd.next();
   String page_name = sCmd.next();
   String type = sCmd.next();
   String page_number = sCmd.next();
@@ -102,122 +178,122 @@ void dallas() {
   sensors.setOneWire(oneWire);
   sensors.begin();
   sensors.setResolution(12);
-  choose_viget_and_create(viget_name, page_name, page_number, type, "dallas");
-  ts.add(DALLAS, temp_update_int, [&](void*) {
-    float temp = 0;
-    static float temp_old;
-    sensors.requestTemperatures();
-    temp = sensors.getTempCByIndex(0);
-    jsonWrite(configJson, "dallas", String(temp));
-    //if (temp_old != temp) {
-    eventGen ("dallas", "");
-    sendSTATUS("dallas", String(temp));
-    if (client.connected()) {
-      Serial.println("[i] sensor 'dallas' send date " + String(temp));
-    }
-    //}
-    temp_old = temp;
-  }, nullptr, true);
+  choose_widget_and_create(widget_name, page_name, page_number, type, "dallas");
+  sensors_reading_map[3] = 1;
 }
 
-
-//======================================================================================================================
-//=========================================Модуль сенсоров DHT==========================================================
+void dallas_reading() {
+  float temp = 0;
+  sensors.requestTemperatures();
+  temp = sensors.getTempCByIndex(0);
+  jsonWriteStr(configLiveJson, "dallas", String(temp));
+  eventGen ("dallas", "");
+  sendSTATUS("dallas", String(temp));
+  Serial.println("[i] sensor 'dallas' send date " + String(temp));
+}
+#endif
+//=========================================================================================================================================
+//=========================================Модуль сенсоров DHT=============================================================================
+#ifdef dht_enable
+//dhtT t 2 dht11 Температура#DHT,#t°C Датчики any-data 1
 void dhtT() {
-  String sensor_type = sCmd.next();
+  String value_name = sCmd.next();
   String pin = sCmd.next();
-  String viget_name = sCmd.next();
+  String sensor_type = sCmd.next();
+  String widget_name = sCmd.next();
   String page_name = sCmd.next();
   String type = sCmd.next();
   String page_number = sCmd.next();
-  if (sensor_type == "DHT11") {
+  dhtT_value_name = value_name;
+  if (sensor_type == "dht11") {
     dht.setup(pin.toInt(), DHTesp::DHT11);
   }
-  if (sensor_type == "DHT22") {
+  if (sensor_type == "dht22") {
     dht.setup(pin.toInt(), DHTesp::DHT22);
   }
-  choose_viget_and_create(viget_name, page_name, page_number, type, "dhtT");
-  ts.add(DHTT, dhtT_update_int, [&](void*) { //dht.getMinimumSamplingPeriod()
-    float value = 0;
-    static float value_old;
-    static int counter;
-    if (dht.getStatus() != 0 && counter < 5) {
-      sendSTATUS("dhtT", String(dht.getStatusString()));
-      counter++;
-    } else {
-      counter = 0;
-      value = dht.getTemperature();
-      jsonWrite(configJson, "dhtT", String(value));
-      //if (value_old != value) {
-      eventGen ("dhtT", "");
-      sendSTATUS("dhtT", String(value));
-      if (client.connected()) {
-        Serial.println("[i] sensor 'dhtT' send date " + String(value));
-      }
-      //}
-      value_old = value;
-    }
-  }, nullptr, true);
+  choose_widget_and_create(widget_name, page_name, page_number, type, value_name);
+  sensors_reading_map[4] = 1;
 }
 
+void dhtT_reading() {
+  float value = 0;
+  static int counter;
+  if (dht.getStatus() != 0 && counter < 5) {
+    sendSTATUS(dhtT_value_name, String(dht.getStatusString()));
+    counter++;
+  } else {
+    counter = 0;
+    value = dht.getTemperature();
+    if (String(value) != "nan") {
+      eventGen (dhtT_value_name, "");
+      jsonWriteStr(configLiveJson, dhtT_value_name, String(value));
+      sendSTATUS(dhtT_value_name, String(value));
+      Serial.println("[i] sensor '" + dhtT_value_name + "' data: " + String(value));
+    }
+  }
+}
 
+//dhtH h 2 dht11 Влажность#DHT,#t°C Датчики any-data 1
 void dhtH() {
-  String sensor_type = sCmd.next();
+  String value_name = sCmd.next();
   String pin = sCmd.next();
-  String viget_name = sCmd.next();
+  String sensor_type = sCmd.next();
+  String widget_name = sCmd.next();
   String page_name = sCmd.next();
   String type = sCmd.next();
   String page_number = sCmd.next();
-  if (sensor_type == "DHT11") {
+  dhtH_value_name = value_name;
+  if (sensor_type == "dht11") {
     dht.setup(pin.toInt(), DHTesp::DHT11);
   }
-  if (sensor_type == "DHT22") {
+  if (sensor_type == "dht22") {
     dht.setup(pin.toInt(), DHTesp::DHT22);
   }
-  choose_viget_and_create(viget_name, page_name, page_number, type, "dhtH");
-  ts.add(DHTH, dhtH_update_int , [&](void*) {  //dht.getMinimumSamplingPeriod()
-    int value = 0;
-    static int value_old;
-    static int counter;
-    if (dht.getStatus() != 0 && counter < 5) {
-      sendSTATUS("dhtH", String(dht.getStatusString()));
-      counter++;
-    } else {
-      counter = 0;
-      value = dht.getHumidity();
-      jsonWrite(configJson, "dhtH", String(value));
-      //if (value_old != value) {
-      eventGen ("dhtH", "");
-      sendSTATUS("dhtH", String(value));
-      if (client.connected()) {
-        Serial.println("[i] sensor 'dhtH' send date " + String(value));
-      }
-      //}
-      value_old = value;
-    }
-  }, nullptr, true);
+  choose_widget_and_create(widget_name, page_name, page_number, type, value_name);
+  sensors_reading_map[5] = 1;
 }
 
-void dhtPerception() {
-  String viget_name = sCmd.next();
+void dhtH_reading() {
+  float value = 0;
+  static int counter;
+  if (dht.getStatus() != 0 && counter < 5) {
+    sendSTATUS(dhtH_value_name, String(dht.getStatusString()));
+    counter++;
+  } else {
+    counter = 0;
+    value = dht.getHumidity();
+    if (String(value) != "nan") {
+      eventGen (dhtH_value_name, "");
+      jsonWriteStr(configLiveJson, dhtH_value_name, String(value));
+      sendSTATUS(dhtH_value_name, String(value));
+      Serial.println("[i] sensor '" + dhtH_value_name + "' data: " + String(value));
+    }
+  }
+}
+
+//dhtPerception Восприятие: Датчики 4
+void dhtP() {
+  String widget_name = sCmd.next();
   String page_name = sCmd.next();
   String page_number = sCmd.next();
-  choose_viget_and_create(viget_name, page_name, page_number, "any-data", "dhtPerception");
-  ts.add(DHTP, dht_calculation_update_int, [&](void*) {
-    byte value;
-    if (dht.getStatus() != 0) {
-      sendSTATUS("dhtPerception", String(dht.getStatusString()));
-    } else {
-      value = dht.computePerception(jsonRead(configJson, "dhtT").toFloat(), jsonRead(configJson, "dhtH").toFloat(), false);
-      String final_line = perception(value);
-      jsonWrite(configJson, "dhtPerception", final_line);
-      eventGen ("dhtPerception", "");
-      sendSTATUS("dhtPerception", final_line);
-      if (client.connected()) {
-        Serial.println("[i] sensor 'dhtPerception' send date " + final_line);
-      }
+  choose_widget_and_create(widget_name, page_name, page_number, "any-data", "dhtPerception");
+  sensors_reading_map[6] = 1;
+}
+
+void dhtP_reading() {
+  byte value;
+  if (dht.getStatus() != 0) {
+    sendSTATUS("dhtPerception", String(dht.getStatusString()));
+  } else {
+    value = dht.computePerception(jsonReadStr(configLiveJson, dhtT_value_name).toFloat(), jsonReadStr(configLiveJson, dhtH_value_name).toFloat(), false);
+    String final_line = perception(value);
+    jsonWriteStr(configLiveJson, "dhtPerception", final_line);
+    eventGen ("dhtPerception", "");
+    sendSTATUS("dhtPerception", final_line);
+    if (client_mqtt.connected()) {
+      Serial.println("[i] sensor 'dhtPerception' data: " + final_line);
     }
-  }, nullptr, true);
+  }
 }
 
 String perception(byte value) {
@@ -231,192 +307,250 @@ String perception(byte value) {
   if (value == 7) return "Сильно неудобно, полный звиздец";
 }
 
-void dhtComfort() {
-  String viget_name = sCmd.next();
+//dhtComfort Степень#комфорта: Датчики 3
+void dhtC() {
+  String widget_name = sCmd.next();
   String page_name = sCmd.next();
   String page_number = sCmd.next();
-  choose_viget_and_create(viget_name, page_name, page_number, "any-data", "dhtComfort");
-  ts.add(DHTC, dht_calculation_update_int, [&](void*) {
-    float value;
-    ComfortState cf;
-    if (dht.getStatus() != 0) {
-      sendSTATUS("dhtComfort", String(dht.getStatusString()));
-    } else {
-      value = dht.getComfortRatio(cf, jsonRead(configJson, "dhtT").toFloat(), jsonRead(configJson, "dhtH").toFloat(), false);
-      String comfortStatus;
-      switch (cf) {
-        case Comfort_OK:
-          comfortStatus = "Отлично";
-          break;
-        case Comfort_TooHot:
-          comfortStatus = "Очень жарко";
-          break;
-        case Comfort_TooCold:
-          comfortStatus = "Очень холодно";
-          break;
-        case Comfort_TooDry:
-          comfortStatus = "Очень сухо";
-          break;
-        case Comfort_TooHumid:
-          comfortStatus = "Очень влажно";
-          break;
-        case Comfort_HotAndHumid:
-          comfortStatus = "Жарко и влажно";
-          break;
-        case Comfort_HotAndDry:
-          comfortStatus = "Жарко и сухо";
-          break;
-        case Comfort_ColdAndHumid:
-          comfortStatus = "Холодно и влажно";
-          break;
-        case Comfort_ColdAndDry:
-          comfortStatus = "Холодно и сухо";
-          break;
-        default:
-          comfortStatus = "Неизвестно";
-          break;
-      };
-      String final_line = comfortStatus;
-      jsonWrite(configJson, "dhtComfort", final_line);
-      eventGen ("dhtComfort", "");
-      sendSTATUS("dhtComfort", final_line);
-      if (client.connected()) {
-        Serial.println("[i] sensor 'dhtComfort' send date " + final_line);
-      }
-    }
-  }, nullptr, true);
+  choose_widget_and_create(widget_name, page_name, page_number, "any-data", "dhtComfort");
+  sensors_reading_map[7] = 1;
 }
 
-void dhtDewpoint() {
-  String viget_name = sCmd.next();
-  String page_name = sCmd.next();
-  String page_number = sCmd.next();
-  choose_viget_and_create(viget_name, page_name, page_number, "any-data", "dhtDewpoint");
-  ts.add(DHTD, dht_calculation_update_int, [&](void*) {
-    float value;
-    if (dht.getStatus() != 0) {
-      sendSTATUS("dhtDewpoint", String(dht.getStatusString()));
-    } else {
-      value = dht.computeDewPoint(jsonRead(configJson, "dhtT").toFloat(), jsonRead(configJson, "dhtH").toFloat(), false);
-      jsonWrite(configJson, "dhtDewpoint", value);
-      eventGen ("dhtDewpoint", "");
-      sendSTATUS("dhtDewpoint", String(value));
-      if (client.connected()) {
-        Serial.println("[i] sensor 'dhtDewpoint' send date " + String(value));
-      }
-    }
-  }, nullptr, true);
-}
-
-
-void choose_viget_and_create(String viget_name, String page_name, String page_number, String type, String topik) {
-
-  if (type == "any-data") createViget (viget_name, page_name, page_number, "vigets/viget.anydata.json", topik);
-  if (type == "progress-line") createViget (viget_name, page_name, page_number, "vigets/viget.progressL.json", topik);
-  if (type == "progress-round") createViget (viget_name, page_name, page_number, "vigets/viget.progressR.json", topik);
-
-
-}
-//======================================================================================================================
-//===============================================Логирование============================================================
-
-void logging() {
-
-  static boolean flag = true;
-
-  String sensor_name = sCmd.next();
-  String period_min = sCmd.next();
-  String maxCount = sCmd.next();
-  String viget_name = sCmd.next();
-  viget_name.replace("#", " ");
-  String page_name = sCmd.next();
-  String page_number = sCmd.next();
-
-  if (sensor_name == "analog") jsonWrite(optionJson, "analog_logging_count", maxCount);
-  if (sensor_name == "level") jsonWrite(optionJson, "level_logging_count", maxCount);
-  if (sensor_name == "dallas") jsonWrite(optionJson, "dallas_logging_count", maxCount);
-  if (sensor_name == "ph") jsonWrite(optionJson, "ph_logging_count", maxCount);
-  /*
-    if (sensor_name == "analog") createViget (viget_name, page_name, page_number, "vigets/viget.chart.json", "loganalog", "maxCount", maxCount);
-    if (sensor_name == "level") createViget (viget_name, page_name, page_number, "vigets/viget.chart.json", "loglevel", "maxCount", maxCount);
-    if (sensor_name == "dallas") createViget (viget_name, page_name, page_number, "vigets/viget.chart.json", "logdallas", "maxCount", maxCount);
-    if (sensor_name == "ph") createViget (viget_name, page_name, page_number, "vigets/viget.chart.json", "logph", "maxCount", maxCount);
-  */
-  if (sensor_name == "analog") {
-    flagLoggingAnalog = true;
-    ts.remove(ANALOG_LOG);
-    ts.add(ANALOG_LOG, period_min.toInt() * 1000 * 60, [&](void*) {
-      deleteOldDate("log.analog.txt", jsonReadtoInt(optionJson, "analog_logging_count"), jsonRead(configJson, "analog"), false);
-    }, nullptr, true);
-  }
-
-  if (sensor_name == "level") {
-    flagLoggingLevel = true;
-    ts.remove(LEVEL_LOG);
-    ts.add(LEVEL_LOG, period_min.toInt() * 1000 * 60, [&](void*) {
-      deleteOldDate("log.level.txt", jsonReadtoInt(optionJson, "level_logging_count"), jsonRead(configJson, "level"), false);
-    }, nullptr, true);
-  }
-
-  if (sensor_name == "dallas") {
-    flagLoggingDallas = true;
-    ts.remove(DALLAS_LOG);
-    ts.add(DALLAS_LOG, period_min.toInt() * 1000 * 60, [&](void*) {
-      deleteOldDate("log.dallas.txt", jsonReadtoInt(optionJson, "dallas_logging_count"), jsonRead(configJson, "dallas"), false);
-    }, nullptr, true);
-  }
-
-  if (sensor_name == "ph") {
-    flagLoggingPh = true;
-    ts.remove(PH_LOG);
-    ts.add(PH_LOG, period_min.toInt() * 1000 * 60, [&](void*) {
-      deleteOldDate("log.ph.txt", jsonReadtoInt(optionJson, "ph_logging_count"), jsonRead(configJson, "ph"), false);
-    }, nullptr, true);
-  }
-}
-
-void deleteOldDate(String file, int seted_number_of_lines, String date_to_add, boolean date_time) {
-
-  String current_time;
-
-  if (date_time) {
-    current_time = GetDataDigital() + " " + GetTimeWOsec();
-    current_time.replace(".", "");
-    current_time.replace(":", "");
+void dhtC_reading() {
+  float value;
+  ComfortState cf;
+  if (dht.getStatus() != 0) {
+    sendSTATUS("dhtComfort", String(dht.getStatusString()));
   } else {
-    current_time = "";
-  }
-
-  String log_date = readFile(file, 5000);
-  getMemoryLoad("[i] after logging procedure");
-
-  //предел количества строк 255
-
-  log_date.replace("\r\n", "\n");
-  log_date.replace("\r", "\n");
-
-  int current_number_of_lines = count(log_date, "\n");
-  Serial.println("[i] in log file " + file + " " + current_number_of_lines + " lines");
-
-
-  if (current_number_of_lines > seted_number_of_lines + 1) {
-    SPIFFS.remove("/" + file);
-    current_number_of_lines = 0;
-  }
-  if (current_number_of_lines == 0) {
-    SPIFFS.remove("/" + file);
-    current_number_of_lines = 0;
-  }
-  if (current_number_of_lines > seted_number_of_lines) {
-    log_date = deleteBeforeDelimiter(log_date, "\n");
-    log_date += current_time + " " +  date_to_add + "\n";
-    writeFile(file, log_date);
-
-  } else {
-    if (date_time) {
-      addFile(file, current_time + " " +  date_to_add);
-    } else {
-      addFile(file, date_to_add);
-    }
+    value = dht.getComfortRatio(cf, jsonReadStr(configLiveJson, dhtT_value_name).toFloat(), jsonReadStr(configLiveJson, dhtH_value_name).toFloat(), false);
+    String final_line = get_comfort_status(cf);
+    jsonWriteStr(configLiveJson, "dhtComfort", final_line);
+    eventGen ("dhtComfort", "");
+    sendSTATUS("dhtComfort", final_line);
+    Serial.println("[i] sensor 'dhtComfort' send date " + final_line);
   }
 }
+
+String get_comfort_status(ComfortState cf) {
+  String comfortStatus;
+  switch (cf) {
+    case Comfort_OK:
+      comfortStatus = "Отлично";
+      break;
+    case Comfort_TooHot:
+      comfortStatus = "Очень жарко";
+      break;
+    case Comfort_TooCold:
+      comfortStatus = "Очень холодно";
+      break;
+    case Comfort_TooDry:
+      comfortStatus = "Очень сухо";
+      break;
+    case Comfort_TooHumid:
+      comfortStatus = "Очень влажно";
+      break;
+    case Comfort_HotAndHumid:
+      comfortStatus = "Жарко и влажно";
+      break;
+    case Comfort_HotAndDry:
+      comfortStatus = "Жарко и сухо";
+      break;
+    case Comfort_ColdAndHumid:
+      comfortStatus = "Холодно и влажно";
+      break;
+    case Comfort_ColdAndDry:
+      comfortStatus = "Холодно и сухо";
+      break;
+    default:
+      comfortStatus = "Неизвестно";
+      break;
+  };
+  return comfortStatus;
+}
+
+
+//dhtDewpoint Точка#росы: Датчики 5
+void dhtD() {
+  String widget_name = sCmd.next();
+  String page_name = sCmd.next();
+  String page_number = sCmd.next();
+  choose_widget_and_create(widget_name, page_name, page_number, "any-data", "dhtDewpoint");
+  sensors_reading_map[8] = 1;
+}
+
+void dhtD_reading() {
+  float value;
+  if (dht.getStatus() != 0) {
+    sendSTATUS("dhtDewpoint", String(dht.getStatusString()));
+  } else {
+    value = dht.computeDewPoint(jsonReadStr(configLiveJson, dhtT_value_name).toFloat(), jsonReadStr(configLiveJson, dhtH_value_name).toFloat(), false);
+    jsonWriteInt(configLiveJson, "dhtDewpoint", value);
+    eventGen ("dhtDewpoint", "");
+    sendSTATUS("dhtDewpoint", String(value));
+    Serial.println("[i] sensor 'dhtDewpoint' data: " + String(value));
+  }
+}
+#endif
+//=========================================i2c bus esp8266 scl-4 sda-5 ====================================================================
+//=========================================================================================================================================
+//=========================================Модуль сенсоров bmp280==========================================================================
+#ifdef bmp_enable
+//bmp280T temp1 0x76 Температура#bmp280 Датчики any-data 1
+void bmp280T() {
+  String value_name = sCmd.next();
+  String address = sCmd.next();
+  String widget_name = sCmd.next();
+  String page_name = sCmd.next();
+  String type = sCmd.next();
+  String page_number = sCmd.next();
+  bmp280T_value_name = value_name;
+  choose_widget_and_create(widget_name, page_name, page_number, type, value_name);
+  bmp.begin(hexStringToUint8(address));
+  bmp.setSampling(Adafruit_BMP280::MODE_NORMAL,     /* Operating Mode. */
+                  Adafruit_BMP280::SAMPLING_X2,     /* Temp. oversampling */
+                  Adafruit_BMP280::SAMPLING_X16,    /* Pressure oversampling */
+                  Adafruit_BMP280::FILTER_X16,      /* Filtering. */
+                  Adafruit_BMP280::STANDBY_MS_500); /* Standby time. */
+  //bmp_temp->printSensorDetails();
+  sensors_reading_map[9] = 1;
+}
+
+void bmp280T_rading() {
+  float value = 0;
+  sensors_event_t temp_event, pressure_event;
+  bmp_temp->getEvent(&temp_event);
+  value = temp_event.temperature;
+  jsonWriteStr(configLiveJson, bmp280T_value_name, String(value));
+  eventGen(bmp280T_value_name, "");
+  sendSTATUS(bmp280T_value_name, String(value));
+  Serial.println("[i] sensor '" + bmp280T_value_name + "' data: " + String(value));
+}
+
+//bmp280P press1 0x76 Давление#bmp280 Датчики any-data 2
+void bmp280P() {
+  String value_name = sCmd.next();
+  String address = sCmd.next();
+  String widget_name = sCmd.next();
+  String page_name = sCmd.next();
+  String type = sCmd.next();
+  String page_number = sCmd.next();
+  bmp280P_value_name = value_name;
+  choose_widget_and_create(widget_name, page_name, page_number, type, value_name);
+  bmp.begin(hexStringToUint8(address));
+  bmp.setSampling(Adafruit_BMP280::MODE_NORMAL,     /* Operating Mode. */
+                  Adafruit_BMP280::SAMPLING_X2,     /* Temp. oversampling */
+                  Adafruit_BMP280::SAMPLING_X16,    /* Pressure oversampling */
+                  Adafruit_BMP280::FILTER_X16,      /* Filtering. */
+                  Adafruit_BMP280::STANDBY_MS_500); /* Standby time. */
+  //bmp_temp->printSensorDetails();
+  sensors_reading_map[10] = 1;
+}
+
+void bmp280P_reading() {
+  float value = 0;
+  sensors_event_t temp_event, pressure_event;
+  bmp_pressure->getEvent(&pressure_event);
+  value = pressure_event.pressure;
+  value = value / 1.333224;
+  jsonWriteStr(configLiveJson, bmp280P_value_name, String(value));
+  eventGen(bmp280P_value_name, "");
+  sendSTATUS(bmp280P_value_name, String(value));
+  Serial.println("[i] sensor '" + bmp280P_value_name + "' data: " + String(value));
+}
+#endif
+//=========================================================================================================================================
+//=============================================Модуль сенсоров bme280======================================================================
+#ifdef bme_enable
+//bme280T temp1 0x76 Температура#bmp280 Датчики any-data 1
+void bme280T() {
+  String value_name = sCmd.next();
+  String address = sCmd.next();
+  String widget_name = sCmd.next();
+  String page_name = sCmd.next();
+  String type = sCmd.next();
+  String page_number = sCmd.next();
+  bme280T_value_name = value_name;
+  choose_widget_and_create(widget_name, page_name, page_number, type, value_name);
+  bme.begin(hexStringToUint8(address));
+  sensors_reading_map[11] = 1;
+}
+
+void bme280T_reading() {
+  float value = 0;
+  value = bme.readTemperature();
+  jsonWriteStr(configLiveJson, bme280T_value_name, String(value));
+  eventGen(bme280T_value_name, "");
+  sendSTATUS(bme280T_value_name, String(value));
+  Serial.println("[i] sensor '" + bme280T_value_name + "' data: " + String(value));
+}
+
+//bme280P pres1 0x76 Давление#bmp280 Датчики any-data 1
+void bme280P() {
+  String value_name = sCmd.next();
+  String address = sCmd.next();
+  String widget_name = sCmd.next();
+  String page_name = sCmd.next();
+  String type = sCmd.next();
+  String page_number = sCmd.next();
+  bme280P_value_name = value_name;
+  choose_widget_and_create(widget_name, page_name, page_number, type, value_name);
+  bme.begin(hexStringToUint8(address));
+  sensors_reading_map[12] = 1;
+}
+
+void bme280P_reading() {
+  float value = 0;
+  value = bme.readPressure();
+  value = value / 1.333224;
+  jsonWriteStr(configLiveJson, bme280P_value_name, String(value));
+  eventGen(bme280P_value_name, "");
+  sendSTATUS(bme280P_value_name, String(value));
+  Serial.println("[i] sensor '" + bme280P_value_name + "' data: " + String(value));
+}
+
+//bme280H hum1 0x76 Влажность#bmp280 Датчики any-data 1
+void bme280H() {
+  String value_name = sCmd.next();
+  String address = sCmd.next();
+  String widget_name = sCmd.next();
+  String page_name = sCmd.next();
+  String type = sCmd.next();
+  String page_number = sCmd.next();
+  bme280H_value_name = value_name;
+  choose_widget_and_create(widget_name, page_name, page_number, type, value_name);
+  bme.begin(hexStringToUint8(address));
+  sensors_reading_map[13] = 1;
+}
+
+void bme280H_reading() {
+  float value = 0;
+  value = bme.readHumidity();
+  jsonWriteStr(configLiveJson, bme280H_value_name, String(value));
+  eventGen(bme280H_value_name, "");
+  sendSTATUS(bme280H_value_name, String(value));
+  Serial.println("[i] sensor '" + bme280H_value_name + "' data: " + String(value));
+}
+
+//bme280A altit1 0x76 Высота#bmp280 Датчики any-data 1
+void bme280A() {
+  String value_name = sCmd.next();
+  String address = sCmd.next();
+  String widget_name = sCmd.next();
+  String page_name = sCmd.next();
+  String type = sCmd.next();
+  String page_number = sCmd.next();
+  bme280A_value_name = value_name;
+  choose_widget_and_create(widget_name, page_name, page_number, type, value_name);
+  bme.begin(hexStringToUint8(address));
+  sensors_reading_map[14] = 1;
+}
+
+void bme280A_reading() {
+  float value = 0;
+  value = bme.readAltitude(1013.25);
+  jsonWriteStr(configLiveJson, bme280A_value_name, String(value));
+  eventGen(bme280A_value_name, "");
+  sendSTATUS(bme280A_value_name, String(value));
+  Serial.println("[i] sensor '" + bme280A_value_name + "' data: " + String(value));
+}
+#endif

Ticker_for_TickerScheduler/Ticker/Ticker.cpp

@@ -0,0 +1,87 @@
+/* 
+  Ticker.cpp - esp8266 library that calls functions periodically
+
+  Copyright (c) 2014 Ivan Grokhotkov. All rights reserved.
+  This file is part of the esp8266 core for Arduino environment.
+ 
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include <stddef.h>
+#include <stdint.h>
+
+#include "c_types.h"
+#include "eagle_soc.h"
+#include "ets_sys.h"
+#include "osapi.h"
+
+static const int ONCE   = 0;
+static const int REPEAT = 1;
+
+#include "Ticker.h"
+
+Ticker::Ticker()
+: _timer(nullptr)
+{
+}
+
+Ticker::~Ticker()
+{
+	detach();
+}
+
+void Ticker::_attach_ms(uint32_t milliseconds, bool repeat, callback_with_arg_t callback, uint32_t arg)
+{
+	if (_timer)
+	{
+		os_timer_disarm(_timer);
+	}
+	else
+	{
+		_timer = new ETSTimer;
+	}
+
+	os_timer_setfn(_timer, reinterpret_cast<ETSTimerFunc*>(callback), reinterpret_cast<void*>(arg));
+	os_timer_arm(_timer, milliseconds, (repeat)?REPEAT:ONCE);
+}
+
+void Ticker::detach()
+{
+	if (!_timer)
+		return;
+
+	os_timer_disarm(_timer);
+	delete _timer;
+	_timer = nullptr;
+	_callback_function = nullptr;
+}
+
+bool Ticker::active() const
+{
+	return (bool)_timer;
+}
+
+void Ticker::_static_callback(void* arg)
+{
+	Ticker* _this = (Ticker*)arg;
+	if (_this == nullptr)
+	{
+		return;
+	}
+	if (_this->_callback_function)
+	{
+		_this->_callback_function();
+	}
+}

Ticker_for_TickerScheduler/Ticker/Ticker.h

@@ -0,0 +1,136 @@
+/* 
+  Ticker.h - esp8266 library that calls functions periodically
+
+  Copyright (c) 2014 Ivan Grokhotkov. All rights reserved.
+  This file is part of the esp8266 core for Arduino environment.
+ 
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef TICKER_H
+#define TICKER_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <functional>
+#include <Schedule.h>
+
+extern "C" {
+	typedef struct _ETSTIMER_ ETSTimer;
+}
+
+class Ticker
+{
+public:
+	Ticker();
+	~Ticker();
+	typedef void (*callback_t)(void);
+	typedef void (*callback_with_arg_t)(void*);
+	typedef std::function<void(void)> callback_function_t;
+
+	void attach_scheduled(float seconds, callback_function_t callback)
+	{
+		attach(seconds,std::bind(schedule_function, callback));
+	}
+
+	void attach(float seconds, callback_function_t callback)
+	{
+		_callback_function = callback;
+		attach(seconds, _static_callback, (void*)this);
+	}
+
+	void attach_ms_scheduled(uint32_t milliseconds, callback_function_t callback)
+	{
+		attach_ms(milliseconds, std::bind(schedule_function, callback));
+	}
+
+	void attach_ms(uint32_t milliseconds, callback_function_t callback)
+	{
+		_callback_function = callback;
+		attach_ms(milliseconds, _static_callback, (void*)this);
+	}
+
+	template<typename TArg>
+	void attach(float seconds, void (*callback)(TArg), TArg arg)
+	{
+		static_assert(sizeof(TArg) <= sizeof(uint32_t), "attach() callback argument size must be <= 4 bytes");
+		// C-cast serves two purposes:
+		// static_cast for smaller integer types,
+		// reinterpret_cast + const_cast for pointer types
+		uint32_t arg32 = (uint32_t)arg;
+		_attach_ms(seconds * 1000, true, reinterpret_cast<callback_with_arg_t>(callback), arg32);
+	}
+
+	template<typename TArg>
+	void attach_ms(uint32_t milliseconds, void (*callback)(TArg), TArg arg)
+	{
+		static_assert(sizeof(TArg) <= sizeof(uint32_t), "attach_ms() callback argument size must be <= 4 bytes");
+		uint32_t arg32 = (uint32_t)arg;
+		_attach_ms(milliseconds, true, reinterpret_cast<callback_with_arg_t>(callback), arg32);
+	}
+
+	void once_scheduled(float seconds, callback_function_t callback)
+	{
+		once(seconds, std::bind(schedule_function, callback));
+	}
+
+	void once(float seconds, callback_function_t callback)
+	{
+		_callback_function = callback;
+		once(seconds, _static_callback, (void*)this);
+	}
+
+	void once_ms_scheduled(uint32_t milliseconds, callback_function_t callback)
+	{
+		once_ms(milliseconds, std::bind(schedule_function, callback));
+	}
+
+	void once_ms(uint32_t milliseconds, callback_function_t callback)
+	{
+		_callback_function = callback;
+		once_ms(milliseconds, _static_callback, (void*)this);
+	}
+
+	template<typename TArg>
+	void once(float seconds, void (*callback)(TArg), TArg arg)
+	{
+		static_assert(sizeof(TArg) <= sizeof(uint32_t), "attach() callback argument size must be <= 4 bytes");
+		uint32_t arg32 = (uint32_t)(arg);
+		_attach_ms(seconds * 1000, false, reinterpret_cast<callback_with_arg_t>(callback), arg32);
+	}
+
+	template<typename TArg>
+	void once_ms(uint32_t milliseconds, void (*callback)(TArg), TArg arg)
+	{
+		static_assert(sizeof(TArg) <= sizeof(uint32_t), "attach_ms() callback argument size must be <= 4 bytes");
+		uint32_t arg32 = (uint32_t)(arg);
+		_attach_ms(milliseconds, false, reinterpret_cast<callback_with_arg_t>(callback), arg32);
+	}
+
+	void detach();
+	bool active() const;
+
+protected:	
+	void _attach_ms(uint32_t milliseconds, bool repeat, callback_with_arg_t callback, uint32_t arg);
+	static void _static_callback (void* arg);
+
+protected:
+	ETSTimer* _timer;
+	callback_function_t _callback_function = nullptr;
+};
+
+
+#endif//TICKER_H

Ticker_for_TickerScheduler/Ticker/examples/TickerBasic/TickerBasic.ino

@@ -0,0 +1,45 @@
+/*
+  Basic Ticker usage
+
+  Ticker is an object that will call a given function with a certain period.
+  Each Ticker calls one function. You can have as many Tickers as you like,
+  memory being the only limitation.
+
+  A function may be attached to a ticker and detached from the ticker.
+  There are two variants of the attach function: attach and attach_ms.
+  The first one takes period in seconds, the second one in milliseconds.
+
+  The built-in LED will be blinking.
+*/
+
+#include <Ticker.h>
+
+Ticker flipper;
+
+int count = 0;
+
+void flip() {
+  int state = digitalRead(LED_BUILTIN);  // get the current state of GPIO1 pin
+  digitalWrite(LED_BUILTIN, !state);     // set pin to the opposite state
+
+  ++count;
+  // when the counter reaches a certain value, start blinking like crazy
+  if (count == 20) {
+    flipper.attach(0.1, flip);
+  }
+  // when the counter reaches yet another value, stop blinking
+  else if (count == 120) {
+    flipper.detach();
+  }
+}
+
+void setup() {
+  pinMode(LED_BUILTIN, OUTPUT);
+  digitalWrite(LED_BUILTIN, LOW);
+
+  // flip the pin every 0.3s
+  flipper.attach(0.3, flip);
+}
+
+void loop() {
+}

Ticker_for_TickerScheduler/Ticker/examples/TickerFunctional/TickerFunctional.ino

@@ -0,0 +1,64 @@
+#include "Arduino.h"
+#include "Ticker.h"
+
+#define LED1  2
+#define LED2  4
+#define LED3  12
+#define LED4  14
+#define LED5  15
+
+
+class ExampleClass {
+  public:
+    ExampleClass(int pin, int duration) : _pin(pin), _duration(duration) {
+      pinMode(_pin, OUTPUT);
+      _myTicker.attach_ms(_duration, std::bind(&ExampleClass::classBlink, this));
+    }
+    ~ExampleClass() {};
+
+    int _pin, _duration;
+    Ticker _myTicker;
+
+    void classBlink() {
+      digitalWrite(_pin, !digitalRead(_pin));
+    }
+};
+
+void staticBlink() {
+  digitalWrite(LED2, !digitalRead(LED2));
+}
+
+void scheduledBlink() {
+  digitalWrite(LED3, !digitalRead(LED2));
+}
+
+void parameterBlink(int p) {
+  digitalWrite(p, !digitalRead(p));
+}
+
+Ticker staticTicker;
+Ticker scheduledTicker;
+Ticker parameterTicker;
+Ticker lambdaTicker;
+
+ExampleClass example(LED1, 100);
+
+
+void setup() {
+  pinMode(LED2, OUTPUT);
+  staticTicker.attach_ms(100, staticBlink);
+
+  pinMode(LED3, OUTPUT);
+  scheduledTicker.attach_ms_scheduled(100, scheduledBlink);
+
+  pinMode(LED4, OUTPUT);
+  parameterTicker.attach_ms(100, std::bind(parameterBlink, LED4));
+
+  pinMode(LED5, OUTPUT);
+  lambdaTicker.attach_ms(100, []() {
+    digitalWrite(LED5, !digitalRead(LED5));
+  });
+}
+
+void loop() {
+}

Ticker_for_TickerScheduler/Ticker/examples/TickerParameter/TickerParameter.ino

@@ -0,0 +1,35 @@
+/*
+  Passing paramters to Ticker callbacks
+
+  Apart from void(void) functions, the Ticker library supports
+  functions taking one argument. This argument's size has to be less or
+  equal to 4 bytes (so char, short, int, float, void*, char* types will do).
+
+  This sample runs two tickers that both call one callback function,
+  but with different arguments.
+
+  The built-in LED will be pulsing.
+*/
+
+#include <Ticker.h>
+
+Ticker tickerSetHigh;
+Ticker tickerSetLow;
+
+void setPin(int state) {
+  digitalWrite(LED_BUILTIN, state);
+}
+
+void setup() {
+  pinMode(LED_BUILTIN, OUTPUT);
+  digitalWrite(1, LOW);
+
+  // every 25 ms, call setPin(0)
+  tickerSetLow.attach_ms(25, setPin, 0);
+
+  // every 26 ms, call setPin(1)
+  tickerSetHigh.attach_ms(26, setPin, 1);
+}
+
+void loop() {
+}

Ticker_for_TickerScheduler/Ticker/keywords.txt

@@ -0,0 +1,29 @@
+#######################################
+# Syntax Coloring Map For Wire
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+attach	KEYWORD2
+attach_ms	KEYWORD2
+once	KEYWORD2
+once_ms	KEYWORD2
+detach	KEYWORD2
+active	KEYWORD2
+
+#######################################
+# Instances (KEYWORD2)
+#######################################
+
+Ticker	KEYWORD2
+
+#######################################
+# Constants (LITERAL1)
+#######################################
+

Ticker_for_TickerScheduler/Ticker/library.properties

@@ -0,0 +1,10 @@
+name=Ticker
+version=1.0
+author=Ivan Grokhtokov <ivan@esp8266.com>
+maintainer=Ivan Grokhtokov <ivan@esp8266.com>
+sentence=Allows to call functions with a given interval.
+paragraph=
+category=Timing
+url=
+architectures=esp8266
+dot_a_linkage=true

Time.ino

@@ -1,23 +1,22 @@
 void Time_Init() {
-  server.on("/timeZone", HTTP_GET, [](AsyncWebServerRequest * request) {
-    if (request->hasArg("timezone")) {
-      jsonWrite(configSetup, "timezone", request->getParam("timezone")->value());
-    }
-    saveConfig();
+  ts.add(TIME_SYNC, 30000, [&](void*) {
+    time_check();
+  }, nullptr, true);
+}
+
+void time_check() {
+  if (GetTimeUnix() == "failed") {
+    Serial.println("[i] Time is not synchronized, start synchronization");
     reconfigTime();
-    request->send(200, "text/text", "OK"); // отправляем ответ о выполнении
-  });
-  reconfigTime();
+  }
 }
 
 void reconfigTime() {
   if (WiFi.status() == WL_CONNECTED) {
-
-    configTime(jsonRead(configSetup, "timezone").toInt() * 3600, 0, ntpServer);
-
+    String ntp = jsonReadStr(configSetupJson, "ntp");
+    configTime(0, 0, ntp.c_str());
     int i = 0;
     Serial.println("[i] Awaiting for time ");
-
 #ifdef ESP32
     struct tm timeinfo;
     while (!getLocalTime(&timeinfo) && i <= 4) {
@@ -26,28 +25,40 @@ void reconfigTime() {
       delay(1000);
     }
 #endif
-
 #ifdef ESP8266
-   // while (!time(nullptr) && i < 4) {
-   //   Serial.print(".");
-   //   i++;
-      delay(2000);
-   // }
+    //while (!time(nullptr) && i < 4) {
+    //  Serial.print(".");
+    //  i++;
+    delay(2000);
+    //}
 #endif
-
-    Serial.print("[i] Time = ");
-    Serial.print(GetDataDigital());
-    Serial.print(" ");
-    Serial.println(GetTime());
-
+    if (GetTimeUnix() != "failed") {
+      Serial.print("[V] Time synchronized = ");
+      Serial.print(GetDataDigital());
+      Serial.print(" ");
+      Serial.println(GetTime());
+    } else {
+      Serial.println("[E] Time server or internet connection error, will try again in 30 sec");
+    }
   } else {
     Serial.println("[E] Get time impossible, no wifi connection");
   }
 }
 
+//Получаем время в формате linux gmt
+String GetTimeUnix() {
+  time_t now = time(nullptr);
+  if (now < 30000) {
+    return "failed";
+  } else {
+    return String(now);
+  }
+}
 // Получение текущего времени
 String GetTime() {
   time_t now = time(nullptr); // получаем время с помощью библиотеки time.h
+  int zone = 3600 * jsonReadStr(configSetupJson, "timezone").toInt();
+  now = now + zone;
   String Time = ""; // Строка для результатов времени
   Time += ctime(&now); // Преобразуем время в строку формата Thu Jan 19 00:55:35 2017
   int i = Time.indexOf(":"); //Ишем позицию первого символа :
@@ -57,6 +68,8 @@ String GetTime() {
 
 String GetTimeWOsec() {
   time_t now = time(nullptr); // получаем время с помощью библиотеки time.h
+  int zone = 3600 * jsonReadStr(configSetupJson, "timezone").toInt();
+  now = now + zone;
   String Time = ""; // Строка для результатов времени
   Time += ctime(&now); // Преобразуем время в строку формата Thu Jan 19 00:55:35 2017
   int i = Time.indexOf(":"); //Ишем позицию первого символа :
@@ -67,6 +80,8 @@ String GetTimeWOsec() {
 // Получение даты
 String GetDate() {
   time_t now = time(nullptr); // получаем время с помощью библиотеки time.h
+  int zone = 3600 * jsonReadStr(configSetupJson, "timezone").toInt();
+  now = now + zone;
   String Data = ""; // Строка для результатов времени
   Data += ctime(&now); // Преобразуем время в строку формата Thu Jan 19 00:55:35 2017
   Data.replace("\n", "");
@@ -106,3 +121,11 @@ String GetDataDigital() {
 
   return out;
 }
+
+int timeToMin(String Time) {
+  //"00:00:00"  время в секунды
+  long  min = selectToMarker(Time, ":").toInt() * 60; //общее количество секунд в полных часах
+  Time = deleteBeforeDelimiter (Time, ":"); // Теперь здесь минуты секунды
+  min += selectToMarker(Time, ":").toInt(); // Добавим секунды из полных минут
+  return min;
+}

Timers.ino

@@ -1,115 +1,85 @@
 //================================================================================================================
-//=========================================Таймера=================================================================
+//=========================================Таймеры=================================================================
 void Timer_countdown_init() {
-
+  
   ts.add(TIMER_COUNTDOWN, 1000, [&](void*) {
-
-    String old_line = jsonRead(optionJson, "timers");
-
-
+    
+    String old_line = jsonReadStr(configOptionJson, "timers");
     if (old_line != "") {
-
-      Serial.println(old_line);
-
+      //Serial.println(old_line);
       int i = 0;
-
       do {
-
         String timer = selectFromMarkerToMarker(old_line, "," , i);
-        // Serial.print("timer no " + String (i) + ": ");
-        // Serial.println(timer);
+        Serial.print("timer no " + String (i) + ": ");
+        Serial.println(timer);
         if (timer == "not found" || timer == "") return;
         int number = selectToMarker (timer, ":").toInt();
         int time = readTimer(number);
         if (time == 0) {
-
           delTimer (String (number));
-
-          jsonWrite(configJson, "timerSet" + String(number), "0");
-
-          eventGen ("timerSet", String(number));
-
+          jsonWriteStr(configLiveJson, "timer" + String(number), "0");
+          eventGen ("timer", String(number));
         } else {
           time--;
           addTimer(String (number), String (time));
         }
         i++;
       } while (i <= 9);
-
     }
   }, nullptr, true);
 }
 
-
-
 void timerStart() {
-
   String number = sCmd.next();
   String period_of_time = sCmd.next();
   String type = sCmd.next();
-
   if (period_of_time.indexOf("digit") != -1) {
-    period_of_time = add_set(period_of_time);
-    period_of_time = jsonRead(configJson, period_of_time);
+    //period_of_time = add_set(period_of_time);
+    period_of_time = jsonReadStr(configLiveJson, period_of_time);
   }
-
   if (type == "sec") period_of_time = period_of_time;
   if (type == "min") period_of_time = String(period_of_time.toInt() * 60);
   if (type == "hours") period_of_time = String(period_of_time.toInt() * 60 * 60);
-
   addTimer(number, period_of_time);
-  jsonWrite(configJson, "timerSet" + number, "1");
+  jsonWriteStr(configLiveJson, "timer" + number, "1");
 }
 void addTimer(String number, String time) {
-
-  String tmp = jsonRead(optionJson, "timers");   //1:60,2:120,
+  String tmp = jsonReadStr(configOptionJson, "timers");   //1:60,2:120,
   String new_timer = number + ":" + time;
   int psn1 = tmp.indexOf(number + ":");          //0  ищем позицию таймера который надо заменить
-
   if (psn1 != -1) {                              //если он есть
-
     int psn2 = tmp.indexOf(",", psn1);           //4    от этой позиции находим позицию запятой
-
     String timer = tmp.substring(psn1, psn2);    //1:60  выделяем таймер который надо заменить
     ///tmp.replace(timer, new_timer);            //заменяем таймер на новый (во всей стороке)
     tmp.replace(timer + ",", "");
     tmp += new_timer + ",";
-
   } else {                                       //если его нет
     tmp += new_timer + ",";
   }
-  jsonWrite(optionJson, "timers", tmp);
+  jsonWriteStr(configOptionJson, "timers", tmp);
   //Serial.println("ura");
 }
 
-
 void timerStop() {
-
   String number = sCmd.next();
   delTimer(number);
-
 }
+
 void delTimer (String number) {
-
-  String tmp = jsonRead(optionJson, "timers");       //1:60,2:120,
+  String tmp = jsonReadStr(configOptionJson, "timers");       //1:60,2:120,
   int psn1 = tmp.indexOf(number + ":");              //0  ищем позицию таймера который надо удалить
-
   if (psn1 != -1) {                                  //если он есть
     int psn2 = tmp.indexOf(",", psn1);               //4    от этой позиции находим позицию запятой
     String timer = tmp.substring(psn1, psn2) + ",";  //1:60,  выделяем таймер который надо удалить
     tmp.replace(timer, "");                          //удаляем таймер
-    jsonWrite(optionJson, "timers", tmp);
+    jsonWriteStr(configOptionJson, "timers", tmp);
   }
 }
 
 int readTimer(int number) {
-
-  String tmp = jsonRead(optionJson, "timers");       //1:60,2:120,
-
+  String tmp = jsonReadStr(configOptionJson, "timers");       //1:60,2:120,
   int psn1 = tmp.indexOf(String(number) + ":");              //0  ищем позицию таймера который надо прочитать
-
   String timer;
-
   if (psn1 != -1) {                                  //если он есть
     int psn2 = tmp.indexOf(",", psn1);               //4    от этой позиции находим позицию запятой
     timer = tmp.substring(psn1, psn2);               //1:60  выделяем таймер который надо прочитать
@@ -117,72 +87,3 @@ int readTimer(int number) {
   }
   return timer.toInt();
 }
-
-/*void timer() {
-
-  String seted_time = sCmd.next();
-  String order = sCmd.next();
-  order.replace("_", " ");
-  if (seted_time == current_time) {
-
-    order_loop += order + ",";
-
-  }
-}*/
-
-//------------------------------таймеры------------------------------------------------------
-
-/*
-void time() {
-
-  String time_number = sCmd.next();
-  String time = sCmd.next();
-
-  String time_to_add = time_number + "-" + time;
-
-  String replace_line = jsonRead(optionJson, "times") ;
-  int psn1 = replace_line.indexOf(time_number + "-") ;  //ищем позицию времени которое надо заменить
-
-  if (psn1 != -1) {                              //если оно есть
-
-    int psn2 = replace_line.indexOf(",", psn1);           //от этой позиции находим позицию запятой
-
-    String timer = replace_line.substring(psn1, psn2);    //выделяем таймер который надо заменить
-    ///tmp.replace(timer, new_timer);                     //заменяем таймер на новый (во всей стороке)
-    replace_line.replace(timer + ",", "");
-    replace_line += time_to_add + ",";
-
-  } else {                                              //если его нет
-    replace_line += time_to_add + ",";
-  }
-
-
-  jsonWrite(optionJson, "times", replace_line);
-
-  jsonWrite(configJson, "timeSet" + time_number, "1");
-
-  ts.add(TIMERS, 1000, [&](void*) {
-
-    current_time = GetTime();
-    Serial.println(current_time);
-
-    String seted_times = jsonRead(optionJson, "times");
-
-    while (seted_times.length() != 0) {
-      String tmp = selectToMarker (seted_times, ",");
-
-      String time_number = selectToMarker(tmp, "-");
-      String seted_time = deleteBeforeDelimiter(tmp, "-");
-
-      Serial.println(seted_time);
-
-      if (current_time == seted_time) {
-        jsonWrite(configJson, "timeSet" + time_number, "0");
-        eventGen ("timeSet", time_number);
-      }
-
-      seted_times = deleteBeforeDelimiter(seted_times, ",");
-    }
-  }, nullptr, true);
-}
-*/

Upgrade.ino

@@ -1,33 +1,26 @@
 void initUpgrade() {
-  server.on("/upgrade", HTTP_GET, [](AsyncWebServerRequest * request) {
-
+#ifdef ESP8266
+  if (WiFi.status() == WL_CONNECTED) last_version = getURL("http://91.204.228.124:1100/update/esp8266/version.txt");
+#endif
 #ifdef ESP32
-    new_version = getURL("http://91.204.228.124:1100/update/esp32/version.txt");
+  if (WiFi.status() == WL_CONNECTED) last_version = getURL("http://91.204.228.124:1100/update/esp32/version.txt");
+#endif
+  jsonWriteStr(configSetupJson, "last_version", last_version);
+  Serial.print("[i] Last firmware version: ");
+  Serial.println(last_version);
+}
+
+void do_upgrade_url() {
+  if (upgrade_url) {
+    upgrade_url = false;
+#ifdef ESP32
+    last_version = getURL("http://91.204.228.124:1100/update/esp32/version.txt");
 #endif
 #ifdef ESP8266
-    new_version = getURL("http://91.204.228.124:1100/update/esp8266/version.txt");
+    last_version = getURL("http://91.204.228.124:1100/update/esp8266/version.txt");
 #endif
-
-    Serial.println(new_version);
-   
-    String tmp = "{}";
-
-    if (new_version != "error") {
-      if (new_version == firmware_version) {
-        jsonWrite(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>Последняя версия прошивки уже установлена.");
-        jsonWrite(tmp, "class", "pop-up");
-      } else {
-        upgrade_flag = true;
-        jsonWrite(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>Идет обновление прошивки... После завершения устройство перезагрузится.");
-        jsonWrite(tmp, "class", "pop-up");
-      }
-    } else {
-      jsonWrite(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>Ошибка... Cервер не найден. Попробуйте позже...");
-      jsonWrite(tmp, "class", "pop-up");
-    }
-
-    request->send(200, "text/text", tmp);
-  });
+    jsonWriteStr(configSetupJson, "last_version", last_version);
+  }
 }
 
 void upgrade_firmware() {
@@ -35,11 +28,12 @@ void upgrade_firmware() {
   String scenario_for_update;
   String config_for_update;
   String configSetup_for_update;
-  scenario_for_update = readFile("firmware.scenario.txt", 2048);
-  config_for_update = readFile("firmware.config.txt", 2048);
-  configSetup_for_update = configSetup;
+  scenario_for_update = readFile("firmware.s.txt", 4000);
+  config_for_update = readFile("firmware.c.txt", 4000);
+  configSetup_for_update = configSetupJson;
 
   Serial.println("Start upgrade SPIFFS, please wait...");
+
   WiFiClient client_for_upgrade;
 
 #ifdef ESP32
@@ -53,8 +47,8 @@ void upgrade_firmware() {
 
   if (ret == HTTP_UPDATE_OK) {
 
-    writeFile("firmware.scenario.txt", scenario_for_update);
-    writeFile("firmware.config.txt", config_for_update);
+    writeFile("firmware.s.txt", scenario_for_update);
+    writeFile("firmware.c.txt", config_for_update);
     writeFile("config.json", configSetup_for_update);
     saveConfig();
 
@@ -62,26 +56,31 @@ void upgrade_firmware() {
     Serial.println("Start upgrade BUILD, please wait...");
 
 #ifdef ESP32
-    httpUpdate.rebootOnUpdate(true);
+    //httpUpdate.rebootOnUpdate(true);
     t_httpUpdate_return ret = httpUpdate.update(client_for_upgrade, "http://91.204.228.124:1100/update/esp32/esp32-esp8266_iot-manager_modules_firmware.ino.bin");
 #endif
 #ifdef ESP8266
-    ESPhttpUpdate.rebootOnUpdate(true);
+    //ESPhttpUpdate.rebootOnUpdate(true);
     t_httpUpdate_return ret = ESPhttpUpdate.update(client_for_upgrade, "http://91.204.228.124:1100/update/esp8266/esp32-esp8266_iot-manager_modules_firmware.ino.bin");
 #endif
 
-    Serial.println("BUILD upgrade done!");
-    Serial.println("Restart ESP....");
+    if (ret == HTTP_UPDATE_OK) {
 
+      Serial.println("BUILD upgrade done!");
+      Serial.println("Restart ESP....");
+      ESP.restart();
+    } else {
+      Serial.println("!!!!BUILD upgrade ERROR");
+    }
   } else {
-    //upgrade_status(t_httpUpdate_return ret);
+    Serial.println("!!!!SPIFFS upgrade ERROR");
   }
 }
 
-void handle_upgrade() {
-  if (upgrade_flag) {
-    upgrade_flag = false;
-    upgrade_firmware(); 
+void do_upgrade() {
+  if (upgrade) {
+    upgrade = false;
+    upgrade_firmware();
   }
 }
 
@@ -172,12 +171,12 @@ void handle_upgrade() {
     String config_for_update;
     String configSetup_for_update;
     Serial.println(spiffsData);
-    scenario_for_update = readFile("firmware.scenario.txt", 2048);
+    scenario_for_update = readFile("firmware.s.txt", 2048);
     config_for_update = readFile("config.all.txt", 2048);
     configSetup_for_update = configSetup;
     ESPhttpUpdate.rebootOnUpdate(false); // Отключим перезагрузку после обновления
     updateHTTP(spiffsData, true);
-    writeFile("firmware.scenario.txt", scenario_for_update);
+    writeFile("firmware.s.txt", scenario_for_update);
     writeFile("config.all.txt", config_for_update);
     writeFile("config.json", configSetup_for_update);
     saveConfig();
@@ -210,24 +209,24 @@ void handle_upgrade() {
     case HTTP_UPDATE_FAILED:
       Serial.println(mode + "_FAILED");
       var = "{}";
-      jsonWrite(var, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>_FAILED");
-      jsonWrite(var, "class", "pop-up");
+      jsonWriteStr(var, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>_FAILED");
+      jsonWriteStr(var, "class", "pop-up");
       //request->send(200, "text/text", var);
       break;
 
     case HTTP_UPDATE_NO_UPDATES:
       Serial.println(mode + "_NO_UPDATES");
       var = "{}";
-      jsonWrite(var, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>_NO_UPDATES");
-      jsonWrite(var, "class", "pop-up");
+      jsonWriteStr(var, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>_NO_UPDATES");
+      jsonWriteStr(var, "class", "pop-up");
       //request->send(200, "text/text", var);
       break;
 
     case HTTP_UPDATE_OK:
       Serial.println(mode + "_UPDATE_OK");
       var = "{}";
-      jsonWrite(var, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>_UPDATE_OK");
-      jsonWrite(var, "class", "pop-up");
+      jsonWriteStr(var, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>_UPDATE_OK");
+      jsonWriteStr(var, "class", "pop-up");
       //request->send(200, "text/text", var);
       break;
   }

Web.ino

@@ -0,0 +1,352 @@
+void web_init() {
+  server.on("/set", HTTP_GET, [](AsyncWebServerRequest * request) {
+    String value;
+    //============================device settings=====================================
+    if (request->hasArg("preset")) {
+      //--------------------------------------------------------------------------------
+      String value;
+      value = request->getParam("preset")->value();
+      if (value == "1") {
+        writeFile("firmware.c.txt", readFile("configs/1-relay.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/1-relay.s.txt", 2048));
+      }
+      if (value == "2") {
+        writeFile("firmware.c.txt", readFile("configs/2-relay.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/2-relay.s.txt", 2048));
+      }
+      if (value == "3") {
+        writeFile("firmware.c.txt", readFile("configs/3-relay.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/3-relay.s.txt", 2048));
+      }
+      if (value == "4") {
+        writeFile("firmware.c.txt", readFile("configs/4-relay.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/4-relay.s.txt", 2048));
+      }
+      if (value == "5") {
+        writeFile("firmware.c.txt", readFile("configs/5-relay.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/5-relay.s.txt", 2048));
+      }
+      if (value == "6") {
+        writeFile("firmware.c.txt", readFile("configs/6-relay.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/6-relay.s.txt", 2048));
+      }
+      if (value == "7") {
+        writeFile("firmware.c.txt", readFile("configs/7-relay.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/7-relay.s.txt", 2048));
+      }
+      if (value == "8") {
+        writeFile("firmware.c.txt", readFile("configs/8-pwm.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/8-pwm.s.txt", 2048));
+      }
+      if (value == "9") {
+        writeFile("firmware.c.txt", readFile("configs/9-dht11.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/9-dht11.s.txt", 2048));
+      }
+      if (value == "10") {
+        writeFile("firmware.c.txt", readFile("configs/10-dht22.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/10-dht22.s.txt", 2048));
+      }
+      if (value == "11") {
+        writeFile("firmware.c.txt", readFile("configs/11-analog.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/11-analog.s.txt", 2048));
+      }
+      if (value == "12") {
+        writeFile("firmware.c.txt", readFile("configs/12-bmp280.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/12-bmp280.s.txt", 2048));
+      }
+      if (value == "13") {
+        writeFile("firmware.c.txt", readFile("configs/13-bme280.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/13-bme280.s.txt", 2048));
+      }
+      if (value == "14") {
+        writeFile("firmware.c.txt", readFile("configs/14-dallas.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/14-dallas.s.txt", 2048));
+      }
+      if (value == "15") {
+        writeFile("firmware.c.txt", readFile("configs/15-termostat.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/15-termostat.s.txt", 2048));
+      }
+      if (value == "16") {
+        writeFile("firmware.c.txt", readFile("configs/16-level.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/16-level.s.txt", 2048));
+      }
+      if (value == "17") {
+        writeFile("firmware.c.txt", readFile("configs/17-moution.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/17-moution.s.txt", 2048));
+      }
+      if (value == "18") {
+        writeFile("firmware.c.txt", readFile("configs/18-moution.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/18-moution.s.txt", 2048));
+      }
+      if (value == "19") {
+        writeFile("firmware.c.txt", readFile("configs/19-stepper.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/19-stepper.s.txt", 2048));
+      }
+      if (value == "20") {
+        writeFile("firmware.c.txt", readFile("configs/20-servo.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/20-servo.s.txt", 2048));
+      }
+      if (value == "21") {
+        writeFile("firmware.c.txt", readFile("configs/firmware.c.txt", 2048));
+        writeFile("firmware.s.txt", readFile("configs/firmware.s.txt", 2048));
+      }
+      Device_init();
+      Scenario_init();
+      request->redirect("/?set.device");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("devinit")) {
+      Device_init();
+      request->send(200, "text/text", "OK");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("scen")) {
+      value = request->getParam("scen")->value();
+      if (value == "0") {
+        jsonWriteStr(configSetupJson, "scen", value);
+        saveConfig();
+        Scenario_init();
+      }
+      if (value == "1") {
+        jsonWriteStr(configSetupJson, "scen", value);
+        saveConfig();
+        Scenario_init();
+      }
+      request->send(200, "text/text", "OK");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("sceninit")) {
+      Scenario_init();
+      request->send(200, "text/text", "OK");
+    }
+    //--------------------------------------------------------------------------------
+#ifdef logging_enable
+    if (request->hasArg("cleanlog")) {
+      clean_log_date();
+      request->send(200, "text/text", "OK");
+    }
+#endif
+    //==============================udp settings=============================================
+    if (request->hasArg("udponoff")) {
+      value = request->getParam("udponoff")->value();
+      if (value == "0") {
+        jsonWriteStr(configSetupJson, "udponoff", value);
+        saveConfig();
+        Scenario_init();
+      }
+      if (value == "1") {
+        jsonWriteStr(configSetupJson, "udponoff", value);
+        saveConfig();
+        Scenario_init();
+      }
+      request->send(200, "text/text", "OK");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("updatelist")) {
+      SPIFFS.remove("/dev.csv");
+      addFile("dev.csv", "device id;device name;ip address");
+      request->redirect("/?set.udp");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("updatepage")) {
+      request->redirect("/?set.udp");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("devname")) {
+      jsonWriteStr(configSetupJson, "name", request->getParam("devname")->value());
+      saveConfig();
+      request->send(200, "text/text", "OK");
+    }
+    //==============================wifi settings=============================================
+    if (request->hasArg("routerssid")) {
+      jsonWriteStr(configSetupJson, "routerssid", request->getParam("routerssid")->value());
+      saveConfig();
+      request->send(200, "text/text", "OK");
+    }
+    if (request->hasArg("routerpass")) {
+      jsonWriteStr(configSetupJson, "routerpass", request->getParam("routerpass")->value());
+      saveConfig();
+      request->send(200, "text/text", "OK");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("apssid")) {
+      jsonWriteStr(configSetupJson, "apssid", request->getParam("apssid")->value());
+      saveConfig();
+      request->send(200, "text/text", "OK");
+    }
+    if (request->hasArg("appass")) {
+      jsonWriteStr(configSetupJson, "appass", request->getParam("appass")->value());
+      saveConfig();
+      request->send(200, "text/text", "OK");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("weblogin")) {
+      jsonWriteStr(configSetupJson, "weblogin", request->getParam("weblogin")->value());
+      saveConfig();
+      request->send(200, "text/text", "OK");
+    }
+    if (request->hasArg("webpass")) {
+      jsonWriteStr(configSetupJson, "webpass", request->getParam("webpass")->value());
+      saveConfig();
+      request->send(200, "text/text", "OK");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("timezone")) {
+      jsonWriteStr(configSetupJson, "timezone", request->getParam("timezone")->value());
+      saveConfig();
+      reconfigTime();
+      request->send(200, "text/text", "OK");
+    }
+    if (request->hasArg("ntp")) {
+      jsonWriteStr(configSetupJson, "ntp", request->getParam("ntp")->value());
+      saveConfig();
+      reconfigTime();
+      request->send(200, "text/text", "OK");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("device")) {
+      if (request->getParam("device")->value() == "ok") ESP.restart();
+      request->send(200, "text/text", "OK");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("blink")) {
+      value = request->getParam("blink")->value();
+      if (value == "0") {
+        jsonWriteStr(configSetupJson, "blink", value);
+        saveConfig();
+      }
+      if (value == "1") {
+        jsonWriteStr(configSetupJson, "blink", value);
+        saveConfig();
+      }
+      request->send(200, "text/text", "OK");
+    }
+    //==============================mqtt settings=============================================
+    if (request->hasArg("mqttServer")) {
+      jsonWriteStr(configSetupJson, "mqttServer", request->getParam("mqttServer")->value());
+      saveConfig();
+      mqtt_connection = true;
+      request->send(200, "text/text", "ok");
+    }
+    if (request->hasArg("mqttPort")) {
+      int port = (request->getParam("mqttPort")->value()).toInt();
+      jsonWriteInt(configSetupJson, "mqttPort", port);
+      saveConfig();
+      mqtt_connection = true;
+      request->send(200, "text/text", "ok");
+    }
+    if (request->hasArg("mqttPrefix")) {
+      jsonWriteStr(configSetupJson, "mqttPrefix", request->getParam("mqttPrefix")->value());
+      saveConfig();
+      mqtt_connection = true;
+      request->send(200, "text/text", "ok");
+    }
+    if (request->hasArg("mqttUser")) {
+      jsonWriteStr(configSetupJson, "mqttUser", request->getParam("mqttUser")->value());
+      saveConfig();
+      mqtt_connection = true;
+      request->send(200, "text/text", "ok");
+    }
+    if (request->hasArg("mqttPass")) {
+      jsonWriteStr(configSetupJson, "mqttPass", request->getParam("mqttPass")->value());
+      saveConfig();
+      mqtt_connection = true;
+      request->send(200, "text/text", "ok");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("mqttsend")) {
+      mqtt_send_settings_to_udp = true;
+      request->send(200, "text/text", "ok");
+    }
+    //--------------------------------------------------------------------------------
+    if (request->hasArg("mqttcheck")) {
+      String tmp = "{}";
+      jsonWriteStr(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>" + stateMQTT());
+      jsonWriteStr(tmp, "class", "pop-up");
+      request->send(200, "text/text", tmp);
+    }
+    //==============================push settings=============================================
+#ifdef push_enable
+    if (request->hasArg("pushingboxid")) {
+      jsonWriteStr(configSetupJson, "pushingboxid", request->getParam("pushingboxid")->value());
+      saveConfig();
+      request->send(200, "text/text", "ok");
+    }
+#endif
+    //==============================utilities settings=============================================
+    if (request->hasArg("itoc")) {
+      i2c_scanning = true;
+      request->redirect("/?set.utilities");
+    }
+  });
+  //==============================upgrade settings=============================================
+  server.on("/check", HTTP_GET, [](AsyncWebServerRequest * request) {
+    upgrade_url = true;
+    Serial.print("[i] Last firmware version: ");
+    Serial.println(last_version);
+    String tmp = "{}";
+    int case_of_update;
+
+    if (WiFi.status() != WL_CONNECTED) last_version = "nowifi";
+    if (!mb_4_of_memory) last_version = "less";
+
+    if (last_version == firmware_version) case_of_update = 1;
+    if (last_version != firmware_version) case_of_update = 2;
+    if (last_version == "error") case_of_update = 3;
+    if (last_version == "") case_of_update = 4;
+    if (last_version == "less") case_of_update = 5;
+    if (last_version == "nowifi") case_of_update = 6;
+    if (last_version == "notsupported") case_of_update = 7;
+
+    switch (case_of_update) {
+      case 1: {
+          jsonWriteStr(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>Последняя версия прошивки уже установлена.");
+          jsonWriteStr(tmp, "class", "pop-up");
+        }
+        break;
+
+      case 2: {
+          jsonWriteStr(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>Имеется новая версия прошивки<a href=\"#\" class=\"btn btn-block btn-danger\" onclick=\"send_request(this, '/upgrade');setTimeout(function(){ location.href='/'; }, 120000);html('my-block','<span class=loader></span>Идет обновление прошивки, после обновления страница  перезагрузится автоматически...')\">Установить</a>");
+          jsonWriteStr(tmp, "class", "pop-up");
+        }
+        break;
+
+      case 3: {
+          jsonWriteStr(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>Ошибка... Cервер не найден. Попробуйте позже...");
+          jsonWriteStr(tmp, "class", "pop-up");
+        }
+        break;
+
+      case 4: {
+          jsonWriteStr(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>Нажмите на кнопку \"обновить прошивку\" повторно...");
+          jsonWriteStr(tmp, "class", "pop-up");
+          break;
+        }
+
+      case 5: {
+          jsonWriteStr(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>Обновление по воздуху не поддерживается, модуль имеет меньше 4 мб памяти...");
+          jsonWriteStr(tmp, "class", "pop-up");
+          break;
+        }
+
+      case 6: {
+          jsonWriteStr(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>Устройство не подключено к роутеру...");
+          jsonWriteStr(tmp, "class", "pop-up");
+          break;
+        }
+
+      case 7: {
+          jsonWriteStr(tmp, "title", "<button class=\"close\" onclick=\"toggle('my-block')\">×</button>Обновление на новую версию возможно только через usb...");
+          jsonWriteStr(tmp, "class", "pop-up");
+          break;
+        }
+    }
+    request->send(200, "text/text", tmp);
+  });
+
+  server.on("/upgrade", HTTP_GET, [](AsyncWebServerRequest * request) {
+    upgrade = true;
+    String tmp = "{}";
+    request->send(200, "text/text", "ok");
+  });
+}

Web_server.ino

@@ -1,22 +1,19 @@
 void Web_server_init() {
-
-  //========================================OTA============================================
+  /*********************************************************************************
+  ***************************************OTA****************************************
+  *********************************************************************************/
 #ifdef OTA_enable
-  //Send OTA events to the browser
   ArduinoOTA.onStart([]() {
     events.send("Update Start", "ota");
   });
-
   ArduinoOTA.onEnd([]() {
     events.send("Update End", "ota");
   });
-
   ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
     char p[32];
     sprintf(p, "Progress: %u%%\n", (progress / (total / 100)));
     events.send(p, "ota");
   });
-
   ArduinoOTA.onError([](ota_error_t error) {
     if (error == OTA_AUTH_ERROR) events.send("Auth Failed", "ota");
     else if (error == OTA_BEGIN_ERROR) events.send("Begin Failed", "ota");
@@ -25,47 +22,48 @@ void Web_server_init() {
     else if (error == OTA_END_ERROR) events.send("End Failed", "ota");
   });
   ArduinoOTA.setHostname(hostName);
-
   ArduinoOTA.begin();
 #endif
-  //========================================MDNS============================================
+  /*********************************************************************************
+  **************************************MDNS****************************************
+  *********************************************************************************/
 #ifdef MDNS_enable
   MDNS.addService("http", "tcp", 80);
 #endif
-
   //SPIFFS.begin();
-
-  //========================================WS============================================
+  /*********************************************************************************
+  **************************************WS******************************************
+  *********************************************************************************/
 #ifdef WS_enable
   ws.onEvent(onWsEvent);
   server.addHandler(&ws);
 
   events.onConnect([](AsyncEventSourceClient * client) {
-    client->send("hello!", NULL, millis(), 1000);
+    //!!!client->send("hello!", NULL, millis(), 1000);
   });
 
   server.addHandler(&events);
 #endif
-  //======================================================================================
-
+  /*********************************************************************************
+   **************************************WEB****************************************
+   *********************************************************************************/
 #ifdef ESP32
-  server.addHandler(new SPIFFSEditor(SPIFFS, jsonRead(configSetup, "web_login").c_str(), jsonRead(configSetup, "web_pass").c_str()));
+  server.addHandler(new SPIFFSEditor(SPIFFS, jsonReadStr(configSetupJson, "web_login").c_str(), jsonReadStr(configSetupJson, "web_pass").c_str()));
 #elif defined(ESP8266)
-  server.addHandler(new SPIFFSEditor(jsonRead(configSetup, "web_login").c_str(), jsonRead(configSetup, "web_pass").c_str()));
+  server.addHandler(new SPIFFSEditor(jsonReadStr(configSetupJson, "web_login").c_str(), jsonReadStr(configSetupJson, "web_pass").c_str()));
 #endif
 
-  server.on("/heap", HTTP_GET, [](AsyncWebServerRequest * request) {
-    request->send(200, "text/plain", String(ESP.getFreeHeap()));
-  });
-
+  /*  server.on("/heap", HTTP_GET, [](AsyncWebServerRequest * request) {
+      request->send(200, "text/plain", String(ESP.getFreeHeap()));
+    });*/
 
   server.serveStatic("/css/", SPIFFS, "/css/").setCacheControl("max-age=31536000");
   server.serveStatic("/js/", SPIFFS, "/js/").setCacheControl("max-age=31536000");
-  server.serveStatic("/", SPIFFS, "/favicon.ico").setCacheControl("max-age=31536000");
+  server.serveStatic("/favicon.ico", SPIFFS, "/favicon.ico").setCacheControl("max-age=31536000");
+  server.serveStatic("/icon.jpeg", SPIFFS, "/icon.jpeg").setCacheControl("max-age=31536000");
 
   server.serveStatic("/", SPIFFS, "/").setDefaultFile("index.htm")
-  .setAuthentication(jsonRead(configSetup, "web_login").c_str(), jsonRead(configSetup, "web_pass").c_str());
-
+  .setAuthentication(jsonReadStr(configSetupJson, "web_login").c_str(), jsonReadStr(configSetupJson, "web_pass").c_str());
 
   server.onNotFound([](AsyncWebServerRequest * request) {
     Serial.printf("NOT_FOUND: ");
@@ -113,6 +111,8 @@ void Web_server_init() {
 
     request->send(404);
   });
+
+
   server.onFileUpload([](AsyncWebServerRequest * request, const String & filename, size_t index, uint8_t *data, size_t len, bool final) {
     if (!index)
       Serial.printf("UploadStart: %s\n", filename.c_str());
@@ -120,6 +120,8 @@ void Web_server_init() {
     if (final)
       Serial.printf("UploadEnd: %s (%u)\n", filename.c_str(), index + len);
   });
+
+
   server.onRequestBody([](AsyncWebServerRequest * request, uint8_t *data, size_t len, size_t index, size_t total) {
     if (!index)
       Serial.printf("BodyStart: %u\n", total);
@@ -130,28 +132,37 @@ void Web_server_init() {
 
   server.begin();
 
-  //=============================Устанавливаем реакции на запросы к серверу============================
-
   // --------------------Выдаем данные configJson //config.live.json - динамические данные
   server.on("/config.live.json", HTTP_GET, [](AsyncWebServerRequest * request) {
-    request->send(200, "application/json", configJson);
+    request->send(200, "application/json", configLiveJson);
   });
   // --------------------Выдаем данные optionJson //config.option.json - данные не являющиеся событиями
   server.on("/config.option.json", HTTP_GET, [](AsyncWebServerRequest * request) {
-    request->send(200, "application/json", optionJson);
+    request->send(200, "application/json", configOptionJson);
   });
   // -------------------Выдаем данные configSetup //config.setup.json - для хранения постоянных данных
   server.on("/config.setup.json", HTTP_GET, [](AsyncWebServerRequest * request) {
-    request->send(200, "application/json", configSetup);
+    request->send(200, "application/json", configSetupJson);
+  });
+
+  // ------------------Выполнение команды из запроса
+  //http://192.168.88.45/cmd?command=rel%201%201
+  server.on("/cmd", HTTP_GET, [](AsyncWebServerRequest * request) {
+    String com = request->getParam("command")->value();
+    Serial.println(com);
+    order_loop += com + ",";
+    request->send(200, "text/text", "OK"); // отправляем ответ о выполнении
   });
 }
-//========================================WS=========================================================================================
+/*********************************************************************************************************************************
+ *********************************************************WS**********************************************************************
+ ********************************************************************************************************************************/
 #ifdef WS_enable
 void onWsEvent(AsyncWebSocket * server, AsyncWebSocketClient * client, AwsEventType type, void * arg, uint8_t *data, size_t len) {
   if (type == WS_EVT_CONNECT) {
     Serial.printf("ws[%s][%u] connect\n", server->url(), client->id());
-    client->printf(configJson.c_str(), client->id());
-    client->ping();
+    client->printf(json.c_str(), client->id());
+    //client->ping();
   } else if (type == WS_EVT_DISCONNECT) {
     Serial.printf("ws[%s][%u] disconnect\n", server->url(), client->id());
   } else if (type == WS_EVT_ERROR) {

WiFi.ino

@@ -1,56 +1,12 @@
-void WIFI_init() {
-
-  // --------------------Получаем ssid password со страницы
-  server.on("/ssid", HTTP_GET, [](AsyncWebServerRequest * request) {
-    if (request->hasArg("ssid")) {
-      jsonWrite(configSetup, "ssid", request->getParam("ssid")->value());
-    }
-    if (request->hasArg("password")) {
-      jsonWrite(configSetup, "password", request->getParam("password")->value());
-    }
-    saveConfig();                 // Функция сохранения данных во Flash
-    request->send(200, "text/text", "OK"); // отправляем ответ о выполнении
-  });
-  // --------------------Получаем ssidAP passwordAP со страницы
-  server.on("/ssidap", HTTP_GET, [](AsyncWebServerRequest * request) {
-    if (request->hasArg("ssidAP")) {
-      jsonWrite(configSetup, "ssidAP", request->getParam("ssidAP")->value());
-    }
-    if (request->hasArg("passwordAP")) {
-      jsonWrite(configSetup, "passwordAP", request->getParam("passwordAP")->value());
-    }
-    saveConfig();                 // Функция сохранения данных во Flash
-    request->send(200, "text/text", "OK"); // отправляем ответ о выполнении
-  });
-
-  // --------------------Получаем логин и пароль для web со страницы
-  server.on("/web", HTTP_GET, [](AsyncWebServerRequest * request) {
-    if (request->hasArg("web_login")) {
-      jsonWrite(configSetup, "web_login", request->getParam("web_login")->value());
-    }
-    if (request->hasArg("web_pass")) {
-      jsonWrite(configSetup, "web_pass", request->getParam("web_pass")->value());
-    }
-    saveConfig();                 // Функция сохранения данных во Flash
-    //Web_server_init();
-    request->send(200, "text/text", "OK"); // отправляем ответ о выполнении
-  });
-
-  server.on("/restart", HTTP_GET, [](AsyncWebServerRequest * request) {
-    if (request->hasArg("device")) {
-      if (request->getParam("device")->value() == "ok") ESP.restart();
-    }
-    request->send(200, "text/text", "OK"); // отправляем ответ о выполнении
-  });
-
-
-  // Попытка подключения к точке доступа
+void ROUTER_Connecting() {
+  
+  led_blink("slow");
 
   WiFi.mode(WIFI_STA);
 
   byte tries = 20;
-  String _ssid = jsonRead(configSetup, "ssid");
-  String _password = jsonRead(configSetup, "password");
+  String _ssid = jsonReadStr(configSetupJson, "routerssid");
+  String _password = jsonReadStr(configSetupJson, "routerpass");
   //WiFi.persistent(false);
 
   if (_ssid == "" && _password == "") {
@@ -63,12 +19,11 @@ void WIFI_init() {
   }
   // Делаем проверку подключения до тех пор пока счетчик tries
   // не станет равен нулю или не получим подключение
-  while (--tries && WiFi.status() != WL_CONNECTED)
-  {
+  while (--tries && WiFi.status() != WL_CONNECTED) {
     if (WiFi.status() == WL_CONNECT_FAILED) {
       Serial.println("[E] password is not correct");
       tries = 1;
-      jsonWrite(optionJson, "pass_status", 1);
+      jsonWriteInt(configOptionJson, "pass_status", 1);
     }
     Serial.print(".");
     delay(1000);
@@ -87,11 +42,13 @@ void WIFI_init() {
     // о подключении и выводим адрес IP
     Serial.println("");
     Serial.println("[V] WiFi connected");
-    Serial.print("[V] IP address: ");
+    Serial.print("[V] IP address: http://");
     Serial.print(WiFi.localIP());
     Serial.println("");
-    jsonWrite(configJson, "ip", WiFi.localIP().toString());
-
+    jsonWriteStr(configSetupJson, "ip", WiFi.localIP().toString());
+    led_blink("off");
+    //add_dev_in_list("dev.txt", chipID, WiFi.localIP().toString());
+    MQTT_init();
   }
 }
 
@@ -101,23 +58,25 @@ bool StartAPMode() {
 
   WiFi.mode(WIFI_AP);
 
-  String _ssidAP = jsonRead(configSetup, "ssidAP");
-  String _passwordAP = jsonRead(configSetup, "passwordAP");
+  String _ssidAP = jsonReadStr(configSetupJson, "apssid");
+  String _passwordAP = jsonReadStr(configSetupJson, "appass");
   WiFi.softAP(_ssidAP.c_str(), _passwordAP.c_str());
   IPAddress myIP = WiFi.softAPIP();
+  led_blink("on");
   Serial.print("AP IP address: ");
   Serial.println(myIP);
+  jsonWriteStr(configSetupJson, "ip", myIP.toString());
 
-  if (jsonReadtoInt(optionJson, "pass_status") != 1) {
+  //if (jsonReadInt(configOptionJson, "pass_status") != 1) {
     ts.add(ROUTER_SEARCHING, 10 * 1000, [&](void*) {
       Serial.println("->try find router");
-      if (RouterFind(jsonRead(configSetup, "ssid"))) {
+      if (RouterFind(jsonReadStr(configSetupJson, "routerssid"))) {
         ts.remove(ROUTER_SEARCHING);
-        WIFI_init();
-        MQTT_init();
+        WiFi.scanDelete();
+        ROUTER_Connecting();
       }
     }, nullptr, true);
-  }
+  //}
   return true;
 }
 
@@ -134,7 +93,7 @@ boolean RouterFind(String ssid) {
     Serial.println("[WIFI][i] scanning still in progress");
     return false;
   }
-  if (n == 0) {                       //Сканирование все еще выполняется
+  if (n == 0) {                       //ни одна сеть не найдена
     Serial.println("[WIFI][i] no any wifi sations, starting scanning");
     WiFi.scanNetworks (true, false);
     return false;
@@ -147,14 +106,14 @@ boolean RouterFind(String ssid) {
       } else {
         Serial.print(i);
         Serial.print(")");
-        Serial.print(ssid);
-        Serial.print("<=>");
+        //Serial.print(ssid);
+        //Serial.print("<=>");
         if (i == n) {
           Serial.print(WiFi.SSID(i));
           Serial.println("; ");
         } else {
           Serial.print(WiFi.SSID(i));
-          Serial.print("; ");
+          Serial.println("; ");
         }
       }
     }
@@ -162,3 +121,42 @@ boolean RouterFind(String ssid) {
     return false;
   }
 }
+
+/*
+  String scanWIFI() {
+  uint8_t n = WiFi.scanNetworks();
+  DynamicJsonBuffer jsonBuffer;
+  JsonObject& json = jsonBuffer.createObject();
+  JsonArray& networks = json.createNestedArray("networks");
+  for (uint8_t i = 0; i < n; i++) {
+    JsonObject& data = networks.createNestedObject();
+    String ssidMy = WiFi.SSID(i);
+    data["routerssid"] = ssidMy;
+    data["pass"] = (WiFi.encryptionType(i) == ENC_TYPE_NONE) ? "" : "*";
+    int8_t dbm = WiFi.RSSI(i);
+    data["dbm"] = dbm;
+    if (ssidMy == jsonReadStr(configSetupJson, "routerssid")) {
+      jsonWriteStr(configLiveJson, "dbm", dbm);
+    }
+  }
+  String root;
+  json.printTo(root);
+  return root;
+  }
+*/
+/*
+  {
+   "type":"wifi",
+   "title":"{{LangWiFi1}}",
+   "name":"routerssid",
+   "state":"{{ssid}}",
+   "pattern":".{1,}"
+  },
+  {
+   "type":"routerpass",
+   "title":"{{LangPass}}",
+   "name":"routerpass",
+   "state":"{{ssidPass}}",
+   "pattern":".{8,}"
+  },
+*/

Widgets.ino

@@ -0,0 +1,88 @@
+//======================================================================================================================
+//===============================================Создание виджетов=======================================================
+void createWidget (String widget_name, String  page_name, String page_number, String file, String topic) {
+
+  String widget;
+  widget = readFile(file, 1024);
+
+  if (widget == "Failed") return;
+  if (widget == "Large") return;
+
+  widget_name.replace("#", " ");
+  page_name.replace("#", " ");
+
+  jsonWriteStr(widget, "page", page_name);
+  jsonWriteStr(widget, "order", page_number);
+  jsonWriteStr(widget, "descr", widget_name);
+  jsonWriteStr(widget, "topic", prex + "/" + topic);
+
+#ifdef layout_in_ram
+  all_widgets += widget + "\r\n";
+#else
+  addFile("layout.txt", widget);
+#endif
+  widget = "";
+}
+
+void createWidgetParam (String widget_name, String  page_name, String page_number, String file, String topic, String name1, String param1, String name2, String param2, String name3, String param3) {
+
+  String widget;
+  widget = readFile(file, 1024);
+
+  if (widget == "Failed") return;
+  if (widget == "Large") return;
+
+  widget_name.replace("#", " ");
+  page_name.replace("#", " ");
+
+  jsonWriteStr(widget, "page", page_name);
+  jsonWriteStr(widget, "order", page_number);
+  jsonWriteStr(widget, "descr", widget_name);
+  jsonWriteStr(widget, "topic", prex + "/" + topic);
+
+  if (name1 != "") jsonWriteStr(widget, name1, param1);
+  if (name2 != "") jsonWriteStr(widget, name2, param2);
+  if (name3 != "") jsonWriteStr(widget, name3, param3);
+
+#ifdef layout_in_ram
+  all_widgets += widget + "\r\n";
+#else
+  addFile("layout.txt", widget);
+#endif
+  widget = "";
+}
+
+void createChart (String widget_name, String  page_name, String page_number, String file, String topic, String maxCount) {
+
+  String widget;
+  widget = readFile(file, 1024);
+
+  if (widget == "Failed") return;
+  if (widget == "Large") return;
+
+  widget_name.replace("#", " ");
+  page_name.replace("#", " ");
+
+  jsonWriteStr(widget, "page", page_name);
+  jsonWriteStr(widget, "order", page_number);
+  //jsonWriteStr(widget, "descr", widget_name);
+  jsonWriteStr(widget, "series", widget_name);
+  jsonWriteStr(widget, "maxCount", maxCount);
+  jsonWriteStr(widget, "topic", prex + "/" + topic);
+
+#ifdef layout_in_ram
+  all_widgets += widget + "\r\n";
+#else
+  addFile("layout.txt", widget);
+#endif
+  widget = "";
+}
+
+void choose_widget_and_create(String widget_name, String page_name, String page_number, String type, String topik) {
+
+  if (type == "any-data") createWidget (widget_name, page_name, page_number, "widgets/widget.anyData.json", topik);
+  if (type == "progress-line") createWidget (widget_name, page_name, page_number, "widgets/widget.progLine.json", topik);
+  if (type == "progress-round") createWidget (widget_name, page_name, page_number, "widgets/widget.progRound.json", topik);
+  if (type == "fill-gauge") createWidget (widget_name, page_name, page_number, "widgets/widget.fillGauge.json", topik);
+
+}

bus.ino

@@ -0,0 +1,33 @@
+void do_i2c_scanning() {
+  if (i2c_scanning) {
+    i2c_scanning = false;
+    String tmp = i2c_scan();
+    if (tmp == "error") {
+      tmp = i2c_scan();
+      Serial.println(tmp);
+      jsonWriteStr(configLiveJson, "i2c", tmp);
+    } else {
+      Serial.println(tmp);
+      jsonWriteStr(configLiveJson, "i2c", tmp);
+    }
+  }
+}
+
+String i2c_scan() {
+  String out;
+  byte count = 0;
+  Wire.begin();
+  for (byte i = 8; i < 120; i++) {
+    Wire.beginTransmission(i);
+    if (Wire.endTransmission() == 0) {
+      count++;
+      out += String(count) + ". 0x" + String(i, HEX) + "; ";
+      delay(1);
+    }
+  }
+  if (count == 0) {
+    return "error";
+  } else {
+    return out;
+  }
+}

certificates.ino

@@ -1,72 +0,0 @@
-/*
-const char* local_root_ca1 = \
-                             "-----BEGIN CERTIFICATE-----\n" \
-                             "MIIFdDCCBFygAwIBAgIQJ2buVutJ846r13Ci/ITeIjANBgkqhkiG9w0BAQwFADBv\n" \
-                             "MQswCQYDVQQGEwJTRTEUMBIGA1UEChMLQWRkVHJ1c3QgQUIxJjAkBgNVBAsTHUFk\n" \
-                             "ZFRydXN0IEV4dGVybmFsIFRUUCBOZXR3b3JrMSIwIAYDVQQDExlBZGRUcnVzdCBF\n" \
-                             "eHRlcm5hbCBDQSBSb290MB4XDTAwMDUzMDEwNDgzOFoXDTIwMDUzMDEwNDgzOFow\n" \
-                             "gYUxCzAJBgNVBAYTAkdCMRswGQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0ZXIxEDAO\n" \
-                             "BgNVBAcTB1NhbGZvcmQxGjAYBgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVkMSswKQYD\n" \
-                             "VQQDEyJDT01PRE8gUlNBIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIICIjANBgkq\n" \
-                             "hkiG9w0BAQEFAAOCAg8AMIICCgKCAgEAkehUktIKVrGsDSTdxc9EZ3SZKzejfSNw\n" \
-                             "AHG8U9/E+ioSj0t/EFa9n3Byt2F/yUsPF6c947AEYe7/EZfH9IY+Cvo+XPmT5jR6\n" \
-                             "2RRr55yzhaCCenavcZDX7P0N+pxs+t+wgvQUfvm+xKYvT3+Zf7X8Z0NyvQwA1onr\n" \
-                             "ayzT7Y+YHBSrfuXjbvzYqOSSJNpDa2K4Vf3qwbxstovzDo2a5JtsaZn4eEgwRdWt\n" \
-                             "4Q08RWD8MpZRJ7xnw8outmvqRsfHIKCxH2XeSAi6pE6p8oNGN4Tr6MyBSENnTnIq\n" \
-                             "m1y9TBsoilwie7SrmNnu4FGDwwlGTm0+mfqVF9p8M1dBPI1R7Qu2XK8sYxrfV8g/\n" \
-                             "vOldxJuvRZnio1oktLqpVj3Pb6r/SVi+8Kj/9Lit6Tf7urj0Czr56ENCHonYhMsT\n" \
-                             "8dm74YlguIwoVqwUHZwK53Hrzw7dPamWoUi9PPevtQ0iTMARgexWO/bTouJbt7IE\n" \
-                             "IlKVgJNp6I5MZfGRAy1wdALqi2cVKWlSArvX31BqVUa/oKMoYX9w0MOiqiwhqkfO\n" \
-                             "KJwGRXa/ghgntNWutMtQ5mv0TIZxMOmm3xaG4Nj/QN370EKIf6MzOi5cHkERgWPO\n" \
-                             "GHFrK+ymircxXDpqR+DDeVnWIBqv8mqYqnK8V0rSS527EPywTEHl7R09XiidnMy/\n" \
-                             "s1Hap0flhFMCAwEAAaOB9DCB8TAfBgNVHSMEGDAWgBStvZh6NLQm9/rEJlTvA73g\n" \
-                             "JMtUGjAdBgNVHQ4EFgQUu69+Aj36pvE8hI6t7jiY7NkyMtQwDgYDVR0PAQH/BAQD\n" \
-                             "AgGGMA8GA1UdEwEB/wQFMAMBAf8wEQYDVR0gBAowCDAGBgRVHSAAMEQGA1UdHwQ9\n" \
-                             "MDswOaA3oDWGM2h0dHA6Ly9jcmwudXNlcnRydXN0LmNvbS9BZGRUcnVzdEV4dGVy\n" \
-                             "bmFsQ0FSb290LmNybDA1BggrBgEFBQcBAQQpMCcwJQYIKwYBBQUHMAGGGWh0dHA6\n" \
-                             "Ly9vY3NwLnVzZXJ0cnVzdC5jb20wDQYJKoZIhvcNAQEMBQADggEBAGS/g/FfmoXQ\n" \
-                             "zbihKVcN6Fr30ek+8nYEbvFScLsePP9NDXRqzIGCJdPDoCpdTPW6i6FtxFQJdcfj\n" \
-                             "Jw5dhHk3QBN39bSsHNA7qxcS1u80GH4r6XnTq1dFDK8o+tDb5VCViLvfhVdpfZLY\n" \
-                             "Uspzgb8c8+a4bmYRBbMelC1/kZWSWfFMzqORcUx8Rww7Cxn2obFshj5cqsQugsv5\n" \
-                             "B5a6SE2Q8pTIqXOi6wZ7I53eovNNVZ96YUWYGGjHXkBrI/V5eu+MtWuLt29G9Hvx\n" \
-                             "PUsE2JOAWVrgQSQdso8VYFhH2+9uRv0V9dlfmrPb2LjkQLPNlzmuhbsdjrzch5vR\n" \
-                             "pu/xO28QOG8=\n" \
-                             "-----END CERTIFICATE-----\n";
-
-const char* local_root_ca2 = \
-                             "-----BEGIN CERTIFICATE-----\n" \
-                             "MIIGCDCCA/CgAwIBAgIQKy5u6tl1NmwUim7bo3yMBzANBgkqhkiG9w0BAQwFADCB\n" \
-                             "hTELMAkGA1UEBhMCR0IxGzAZBgNVBAgTEkdyZWF0ZXIgTWFuY2hlc3RlcjEQMA4G\n" \
-                             "A1UEBxMHU2FsZm9yZDEaMBgGA1UEChMRQ09NT0RPIENBIExpbWl0ZWQxKzApBgNV\n" \
-                             "BAMTIkNPTU9ETyBSU0EgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkwHhcNMTQwMjEy\n" \
-                             "MDAwMDAwWhcNMjkwMjExMjM1OTU5WjCBkDELMAkGA1UEBhMCR0IxGzAZBgNVBAgT\n" \
-                             "EkdyZWF0ZXIgTWFuY2hlc3RlcjEQMA4GA1UEBxMHU2FsZm9yZDEaMBgGA1UEChMR\n" \
-                             "Q09NT0RPIENBIExpbWl0ZWQxNjA0BgNVBAMTLUNPTU9ETyBSU0EgRG9tYWluIFZh\n" \
-                             "bGlkYXRpb24gU2VjdXJlIFNlcnZlciBDQTCCASIwDQYJKoZIhvcNAQEBBQADggEP\n" \
-                             "ADCCAQoCggEBAI7CAhnhoFmk6zg1jSz9AdDTScBkxwtiBUUWOqigwAwCfx3M28Sh\n" \
-                             "bXcDow+G+eMGnD4LgYqbSRutA776S9uMIO3Vzl5ljj4Nr0zCsLdFXlIvNN5IJGS0\n" \
-                             "Qa4Al/e+Z96e0HqnU4A7fK31llVvl0cKfIWLIpeNs4TgllfQcBhglo/uLQeTnaG6\n" \
-                             "ytHNe+nEKpooIZFNb5JPJaXyejXdJtxGpdCsWTWM/06RQ1A/WZMebFEh7lgUq/51\n" \
-                             "UHg+TLAchhP6a5i84DuUHoVS3AOTJBhuyydRReZw3iVDpA3hSqXttn7IzW3uLh0n\n" \
-                             "c13cRTCAquOyQQuvvUSH2rnlG51/ruWFgqUCAwEAAaOCAWUwggFhMB8GA1UdIwQY\n" \
-                             "MBaAFLuvfgI9+qbxPISOre44mOzZMjLUMB0GA1UdDgQWBBSQr2o6lFoL2JDqElZz\n" \
-                             "30O0Oija5zAOBgNVHQ8BAf8EBAMCAYYwEgYDVR0TAQH/BAgwBgEB/wIBADAdBgNV\n" \
-                             "HSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwGwYDVR0gBBQwEjAGBgRVHSAAMAgG\n" \
-                             "BmeBDAECATBMBgNVHR8ERTBDMEGgP6A9hjtodHRwOi8vY3JsLmNvbW9kb2NhLmNv\n" \
-                             "bS9DT01PRE9SU0FDZXJ0aWZpY2F0aW9uQXV0aG9yaXR5LmNybDBxBggrBgEFBQcB\n" \
-                             "AQRlMGMwOwYIKwYBBQUHMAKGL2h0dHA6Ly9jcnQuY29tb2RvY2EuY29tL0NPTU9E\n" \
-                             "T1JTQUFkZFRydXN0Q0EuY3J0MCQGCCsGAQUFBzABhhhodHRwOi8vb2NzcC5jb21v\n" \
-                             "ZG9jYS5jb20wDQYJKoZIhvcNAQEMBQADggIBAE4rdk+SHGI2ibp3wScF9BzWRJ2p\n" \
-                             "mj6q1WZmAT7qSeaiNbz69t2Vjpk1mA42GHWx3d1Qcnyu3HeIzg/3kCDKo2cuH1Z/\n" \
-                             "e+FE6kKVxF0NAVBGFfKBiVlsit2M8RKhjTpCipj4SzR7JzsItG8kO3KdY3RYPBps\n" \
-                             "P0/HEZrIqPW1N+8QRcZs2eBelSaz662jue5/DJpmNXMyYE7l3YphLG5SEXdoltMY\n" \
-                             "dVEVABt0iN3hxzgEQyjpFv3ZBdRdRydg1vs4O2xyopT4Qhrf7W8GjEXCBgCq5Ojc\n" \
-                             "2bXhc3js9iPc0d1sjhqPpepUfJa3w/5Vjo1JXvxku88+vZbrac2/4EjxYoIQ5QxG\n" \
-                             "V/Iz2tDIY+3GH5QFlkoakdH368+PUq4NCNk+qKBR6cGHdNXJ93SrLlP7u3r7l+L4\n" \
-                             "HyaPs9Kg4DdbKDsx5Q5XLVq4rXmsXiBmGqW5prU5wfWYQ//u+aen/e7KJD2AFsQX\n" \
-                             "j4rBYKEMrltDR5FL1ZoXX/nUh8HCjLfn4g8wGTeGrODcQgPmlKidrv0PJFGUzpII\n" \
-                             "0fxQ8ANAe4hZ7Q7drNJ3gjTcBpUC2JD5Leo31Rpg0Gcg19hCC0Wvgmje3WYkN5Ap\n" \
-                             "lBlGGSW4gNfL1IYoakRwJiNiqZ+Gb7+6kHDSVneFeO/qJakXzlByjAA6quPbYzSf\n" \
-                             "+AZxAeKCINT+b72x\n" \
-                             "-----END CERTIFICATE-----\n";
-*/

data/config-all.json

@@ -1 +0,0 @@
-{"SSDP":"MODULES","chipID":"905542-1458415","ssidAP":"WiFi","passwordAP":"","ssid":"your_ssid","password":"your_pass","timezone":3,"mqttServer":"","mqttPort":0,"mqttUser":"","mqttPass":"","scenario":"1","timers":"0","pushingbox_id":"","web_login":"admin","web_pass":"admin"}

data/config.json

@@ -1 +1,21 @@
-{"SSDP":"MODULES","chipID":"905542-1458415","ssidAP":"WiFi","passwordAP":"","ssid":"rise","password":"hostel3333","timezone":3,"mqttServer":"m12.cloudmqtt.com","mqttPort":14053,"mqttUser":"lbscvzuj","mqttPass":"bLxlveOgaF8F","scenario":"1","timers":"0","pushingbox_id":"v7C133E426B0C69E","web_login":"admin","web_pass":"admin"}
+{
+    "name": "IoTmanager",
+    "chipID": "",
+    "apssid": "IoTmanager",
+    "appass": "",
+    "routerssid": "rise",
+    "routerpass": "hostel3333",
+    "timezone": 2,
+    "ntp": "pool.ntp.org",
+    "mqttServer": "91.204.228.124",
+    "mqttPort": 1883,
+    "mqttPrefix": "/rise",
+    "mqttUser": "test",
+    "mqttPass": "test",
+    "scen": "1",
+    "pushingboxid": "v7C133E426B0C69E",
+    "weblogin": "admin",
+    "webpass": "admin",
+    "udponoff": "1",
+    "blink":"1"
+}

data/configs/10-dht22.c.txt

@@ -0,0 +1,7 @@
+dhtT t 2 dht22 Температура#DHT,#t°C Датчики any-data 1
+dhtH h 2 dht22 Влажность#DHT,#t°C Датчики any-data 2
+dhtComfort Степень#комфорта: Датчики 3
+dhtPerception Восприятие: Датчики 4
+dhtDewpoint Точка#росы: Датчики 5
+logging t 1 50 Температура Датчики  6
+logging h 1 50 Влажность Датчики  7

data/configs/11-analog.c.txt

@@ -1,7 +1,8 @@
-analog 0 Аналоговый#вход,#% Датчики progress-round 310 620 1 100 1
+analog adc 0 Аналоговый#вход,#% Датчики progress-round 310 620 1 100 1
+logging adc 5 100 Аналоговый#вход Датчики 2
 
 //если датчик углекислого газа выдает напряжение от 1 вольта до 2 вольт, то значит 
 //значение чтения аналогового входа будут примерно равным 
 //при 1 вольте - 310, а при 2 вольтах - 620 (считаем по пропорции)
 //данная строка переведет диапазон 310-620 в диапазон 1-100 и отобразит в приложении
-//варианты отображения: any-data, progress-round, progress-line
+//варианты отображения: any-data, progress-round, progress-line, fill-gauge

data/configs/12-bmp280.c.txt

@@ -0,0 +1,6 @@
+bmp280T temp1 0x76 Температура#bmp280 Датчики any-data 1
+bmp280P press1 0x76 Давление#bmp280 Датчики any-data 2
+logging temp1 1 100 Температура Датчики 3
+logging press1 1 100 Давление Датчики 4
+
+//Чтение и логгирование датчика bmp280. Датчик подключается к шине i2c (esp8266 - gpio 5, 4)

data/configs/13-bme280.c.txt

@@ -0,0 +1,9 @@
+bme280T temp1 0x76 Температура#bmp280 Датчики any-data 1
+bme280P pres1 0x76 Давление#bmp280 Датчики any-data 2
+bme280H hum1 0x76 Влажность#bmp280 Датчики any-data 3
+bme280A altit1 0x76 Высота#bmp280 Датчики any-data 4
+logging temp1 1 100 Температура Датчики 5
+logging press1 1 100 Давление Датчики 6
+logging hum1 1 100 Влажность Датчики 7
+
+//Чтение и логгирование датчика bme280. Датчик подключается к шине i2c (esp8266 - gpio 5, 4)

data/configs/14-dallas.c.txt

@@ -1,4 +1,5 @@
 dallas 2 Водонагреватель,#t°C Датчики any-data 1
+logging dallas 1 100 Температура Датчики 2
 
 //2 - номер пина датчика
-//варианты отображения: any-data, progress-round, progress-line
+//варианты отображения: any-data, progress-round, progress-line, fill-gauge

data/configs/15-termostat.c.txt

@@ -1,9 +1,9 @@
 dallas 2 Водонагреватель,#t°C Термостат any-data 1
-inputDigit digit1 При#скольки#выключить? Термостат 40 2
-inputDigit digit2 При#скольки#включить? Термостат 20 3
-button 1 5 Нагреватель Термостат 0 4
-button 2 line1,line2, Автоматический#режим Термостат 1 5
-
+logging dallas 5 100 Температура Термостат 2
+inputDigit digit1 При#скольки#выключить? Термостат 40 3
+inputDigit digit2 При#скольки#включить? Термостат 20 4
+button 1 5 Нагреватель Термостат 0 5
+button 2 line1,line2, Автоматический#режим Термостат 1 6
 
 //2 - номер пина датчика
 //5 - номер пина реле

data/configs/16-level.c.txt

@@ -1,10 +1,11 @@
-level Вода#в#баке,#% Датчики any-data 125 20 1
+level lev 14 12 Вода#в#баке,#% Датчики fill-gauge 125 20 1
 inputDigit digit1 При#скольки#выключить? Датчики 95 2
 inputDigit digit2 При#скольки#включить? Датчики 10 3
 button 1 5 Насос Датчики 0 4
 button 2 line1,line2, Автоматический#режим Датчики 1 5
+logging lev 1 100 Вода#в#баке Датчики 6
 
 //125 - это расстояние от датчика до дна бака в сантиметрах
 //20 - это расстояние от датчика до поверхности воды когда бак полный в сантиметрах
 //вывод данных будет в процентах заполнения бака
-//варианты отображения: any-data, progress-round, progress-line
+//варианты отображения: any-data, progress-round, progress-line, fill-gauge

data/configs/16-level.s.txt

@@ -0,0 +1,6 @@
+lev > digit1
+buttonSet 1 0
+end
+lev < digit2
+buttonSet 1 1
+end

data/configs/18-moution.c.txt

@@ -2,9 +2,11 @@ switch 1 0 20
 text 1 Вход: Охрана 1
 textSet 1 не#обнаружено-time
 button 1 na Сбросить Охрана 0 2
+button 2 line3, Включить#push Охрана 1 3
 
 //0 - номер пина датчика
 //при срабатывании датчика движения устройство пошлет пуш и в приложении будет
-//написано в текстовом поле, что движение было обнаружено, так же будет зафиксирован
-//момент времени срабатывания датчика
+//написано в текстовом поле, что движение было обнаружено
+//так же будет зафиксирован момент времени срабатывания датчика
+//в приложении можно отключать отправку пуш сообщений на тот случай если дома хозяин
 //перевести датчик снова в режим ожидания движения можно нажав кнопку сброса в приложении

data/configs/18-moution.s.txt

@@ -1,8 +1,10 @@
 switch1 = 1
 textSet 1 обнаружено#движение-time
-push Внимание обнаружено#движение!
 end
 button1 = 1
 textSet 1 не#обнаружено-time
 buttonSet 1 0
+end
+switch1 = 1
+push Внимание обнаружено#движение!
 end

data/configs/19-stepper.c.txt

@@ -0,0 +1,17 @@
+stepper 1 12 4
+stepper 2 13 5
+button 1 na Открыть#штору#1 Шторы 0 1
+button 2 na Открыть#штору#2 Шторы 0 2
+
+//для подключения необходим драйвер шагового двигателя A4988
+
+//stepper 1 12 4 шаговый двигатель с параметрами: 1 - номер шагового двигателя, 
+//12 - номер пина количества шагов, 4 - номер пина направления
+
+//stepper 2 13 5 шаговый двигатель с параметрами: 2 - номер шагового двигателя, 
+//13 - номер пина количества шагов, 5 - номер пина направления
+
+//stepperSet 1 200 5 - прокрутить шаговик номер 1 на 200 шагов по часовой стрелке 
+//с задержкой между шагами 5 милисекунд (чем меньше задержка тем больше скорость)
+//если поставить -200 то будет вращаться против часовой стрелки
+//можно подключить не более двух шаговиков

data/configs/19-stepper.s.txt

@@ -0,0 +1,12 @@
+button1 = 1
+stepperSet 1 200 1
+end
+button1 = 0
+stepperSet 1 -200 1
+end
+button2 = 1
+stepperSet 2 200 1
+end
+button2 = 0
+stepperSet 2 -200 1
+end

data/configs/20-servo.c.txt

@@ -0,0 +1,17 @@
+servo 1 12 50 Мой#сервопривод Сервоприводы 0 100 0 180 1
+servo 2 13 50 Мой#сервопривод Сервоприводы 0 100 0 180 2
+button 1 na Открыть1 Сервоприводы 0 3
+button 2 na Открыть2 Сервоприводы 0 4
+
+//Можно создавать не более двух сервоприводов на одном устройстве. 
+//1 - номер привода
+//12 - номер пина
+//50 - начальное значение в процентах
+
+//0 - 100 диапазон ползунка
+//0 - 180 диапазон угла
+
+//Представим ситуацию когда есть некая заслонка и при угле в 30 градусов она закрыта,
+//а при угле в 90 градусов открыта. В этом случае необходимо написать
+//0 100 30 90 и тогда поставив ползунок в 0 % серва встанет в положение 30 градусов, 
+//а если поставить ползунок в 100 % серва встанет в положение 90 градусов. 

data/configs/20-servo.s.txt

@@ -0,0 +1,12 @@
+button1 = 1
+servoSet 1 100
+end
+button1 = 0
+servoSet 1 0
+end
+button2 = 1
+servoSet 2 100
+end
+button2 = 0
+servoSet 2 0
+end

data/configs/8-pwm.s.txt

@@ -0,0 +1 @@
+

data/configs/9-dht11.c.txt

@@ -0,0 +1,7 @@
+dhtT t 2 dht11 Температура#DHT,#t°C Датчики any-data 1
+dhtH h 2 dht11 Влажность#DHT,#t°C Датчики any-data 2
+dhtComfort Степень#комфорта: Датчики 3
+dhtPerception Восприятие: Датчики 4
+dhtDewpoint Точка#росы: Датчики 5
+logging t 1 50 Температура Датчики  6
+logging h 1 50 Влажность Датчики  7

data/configs/9-dht11.s.txt

@@ -0,0 +1 @@
+

data/configs/dht11.config.txt

@@ -1,8 +0,0 @@
-dhtT DHT11 2 Температура#DHT,#t°C Датчики any-data 1
-dhtH DHT11 2 Влажность#DHT,#% Датчики any-data 2
-dhtComfort Степень#комфорта: Датчики 3
-dhtPerception Восприятие: Датчики 4
-dhtDewpoint Точка#росы: Датчики 5
-
-//2 - номер пина датчика
-//варианты отображения: any-data, progress-round, progress-line

data/configs/dht22.config.txt

@@ -1,8 +0,0 @@
-dhtT DHT22 2 Температура#DHT,#t°C Датчики any-data 1
-dhtH DHT22 2 Влажность#DHT,#% Датчики any-data 2
-dhtComfort Степень#комфорта: Датчики 3
-dhtPerception Восприятие: Датчики 4
-dhtDewpoint Точка#росы: Датчики 5
-
-//2 - номер пина датчика
-//варианты отображения: any-data, progress-round, progress-line

data/configs/firmware.c.txt

@@ -0,0 +1,12 @@
+button 1 na Включить#все Реле 0 1
+button 2 13 Прихожая Реле 0 2
+button 3 14 Кухня Реле 0 3
+pwm 1 3 Яркость#коредор: Реле 1023 4
+pwm 2 4 Яркость#ванная: Реле 510 5
+analog adc 0 Аналоговый#вход Датчики fill-gauge 1 1023 1 1023 6
+logging adc 1 100 Аналоговый#вход Датчики 7
+
+//Это демо конфигурация. В ней показано как связать кнопки c помощью сценариев
+//Кнопка номер 1 связана с кнопкой 2, 3 и с pwm 2
+//Так же продемонстрированна система логгирования данных строкой logging
+//1 - это интервал между точками в минутах, 100 это количество точек 

data/configs/firmware.config.txt

@@ -1,24 +0,0 @@
-button 1 na Включить#все Реле 0 1
-button 2 13 Прихожая Реле 0 2
-button 3 14 Кухня Реле 0 3
-pwm 1 3 Яркость#коредор: Реле 1023 4
-pwm 2 4 Яркость#ванная: Реле 510 5
-//---------------------------------------------------------------------
-analog 0 Аналоговый#вход,#% Датчики progress-round 1 1024 1 1024 6
-inputDigit digit1 При#скольки#включить? Датчики 10 7
-inputDigit digit2 При#скольки#выключить? Датчики 0 8
-button 4 na Нагреватель Датчики 0 9
-//---------------------------------------------------------------------
-button 5 na Вкл#обратный#таймер Таймеры 0 16
-inputDigit digit3 Через#сколько#секунд#включить? Таймеры 5 17
-button 6 na Включится#по#таймеру Таймеры 0 18
-inputTime time1 Во#сколько#включить? Таймеры 20-30-00 19
-button 7 5 Включится#по#таймеру Таймеры 0 20
-//---------------------------------------------------------------------
-switch 1 0 20
-text 1 Вход: Охрана 20
-textSet 1 не#обнаружено-time
-button 8 na Сбросить Охрана 0 21
-//---------------------------------------------------------------------
-button 9 scenario Вкл#выкл#все#сценарии Сценарии 1 23
-button 10 line1,line2, Вкл#выкл#выбранные#сценарии Сценарии 1 24

data/configs/firmware.s.txt

@@ -0,0 +1,13 @@
+button1 = 1
+buttonSet 2 1
+buttonSet 3 1
+pwmSet 2 1024
+end
+button1 = 0
+buttonSet 2 0
+buttonSet 3 0
+pwmSet 2 0
+end
+adc > 50
+buttonSet 2 1
+end

data/configs/firmware.scenario.txt

@@ -1,33 +0,0 @@
-button1 = 1
-buttonSet 2 1
-buttonSet 3 1
-pwmSet 2 1024
-end
-button1 = 0
-buttonSet 2 0
-buttonSet 3 0
-pwmSet 2 0
-end
-analog > digit1
-buttonSet 4 1
-end
-analog < digit2
-buttonSet 4 0
-end
-button5 = 1
-timerStart 1 digit3 sec
-end
-timer1 = 0
-buttonSet 6 1
-end
-timenow = time1
-buttonSet 7 1
-end
-switch1 = 1
-textSet 1 обнаружено#движение-time
-push Внимание обнаружено#движение!
-end
-button8 = 1
-textSet 1 не#обнаружено-time
-buttonSet 8 0
-end

data/configs/level.scenario.txt

@@ -1,6 +0,0 @@
-level > digit1
-buttonSet 1 0
-end
-level < digit2
-buttonSet 1 1
-end

data/configs/relay_rm.config.txt

@@ -1,3 +0,0 @@
-switch 1 0 10
-
-//физическая кнопка номер 1 подключенная к пину 0, задержка от дребезга 10 мс

data/configs/relay_rm.scenario.txt

@@ -1,3 +0,0 @@
-switch1 = 1
-mqtt 3233662-1589489 buttonChange_1
-end

data/configuration.json

@@ -1,115 +0,0 @@
-{
- "configs": [
-
-  "/config.live.json",
-  "/config.setup.json",
-  "/config.option.json"
-  
- ],
- "class":"col-sm-offset-1 col-sm-10",
- "content": [
-  {
-   "type": "h5",
-   "title": "{{SSDP}}",
-   "class":"alert-warning"
-  },
-{
-   "type": "h4",
-   "title": "Device ID: {{chipID}}"
-  },
-{
-   "type": "h4",
-   "title": "IP address: {{ip}}"
-  },
-{
-   "type": "h4",
-   "title": "Uptime: {{uptime}}"
-  },
- {
-   "type": "hr"
-  },
-  
-  {
-   "type":"dropdown",
-   "name":"help-url",
-   "class":"btn btn-warning btn-lg",
-   "style":"display:inline",
-   "title": {
-   "#":"Выбирите то, во что Вы хотите превратить ESP <span class=\"caret\"></span>",
-   "/relay":"Вкл. выкл. локального реле",
-   "/relay_timer":"Вкл. выкл. локального реле в определенное время",
-   "/relay_countdown":"Вкл. выкл. локального реле на определенный период времени",
-   "/relay_several":"Вкл. выкл. нескольких локальных реле кнопкой в приложении",
-   "/relay_switch":"Вкл. выкл. локального реле физической кнопкой (кнопка так же дублируется в приложении)",
-   "/relay_button_remote":"Вкл. выкл. нескольких удаленных реле кнопкой в приложении (нужно указать Device ID)",
-   "/relay_switch_remote":"Вкл. выкл. нескольких удаленных реле физической кнопкой (нужно указать Device ID)",
-   "/pwm":"Широтно импульсная модуляция",
-   "/dht11":"Сенсор DHT11",
-   "/dht22":"Сенсор DHT22, DHT33, DHT44, AM2302, RHT03",
-   "/analog":"Аналоговый сенсор",
-   "/dallas":"Сенсор DS18B20",
-   "/termostat":"Термостат на DS18B20 с переключением в ручной режим",
-   "/level":"Контроль уровня в баке на сенсорах: JSN-SR04T, HC-SR04, HY-SRF05 (управление насосом)",
-   "/moution_relay":"Датчик движения включающий свет",
-   "/moution_security":"Охранный датчик движения",
-   "/default":"Настройки по умолчанию"
-   }
-  },
-{
-   "type": "h2",
-   "title": "Конфигурация устройства"
-  },
- {
-   "type":"file",
-   "state":"firmware.config.txt",
-   "style":"width:100%;height:400px",
-   "title": "Сохранить",
-   "action": "/all_modules_init",
-   "class":"btn btn-block btn-success"
-  },
- {
-   "type": "link",
-   "title": "Инструкция",
-   "action": "https://github.com/DmitryBorisenko33/esp8266_iot-manager_modules_firmware/wiki/Instruction",
-   "class": "btn btn-block btn-primary"
-  },
-{
-   "type": "h2",
-   "title": "Сценарии"
-  },
-{
-"type": "checkbox",
-"name":"scenario",
-"title": "Включить сценарии",
-"action": "/scenario?status=[[scenario]]",
-"state": "{{scenario}}"
-},
-{
-   "type": "h6",
-   "title": ""
-  },
-{
-   "type":"file",
-   "state":"firmware.scenario.txt",
-   "style":"width:100%;height:400px",
-   "title": "Сохранить и включить",
-   "action": "/scenario?status=1",
-   "class":"btn btn-block btn-success"
-  },
-{
-   "type": "hr"
- },
- {
-   "type": "link",
-   "title": "Очистить все логи",
-   "action": "/cleanlog",
-   "class": "btn btn-block btn-success"
-  },
-  {
-   "type": "link",
-   "title": "Главная",
-   "action": "/page.htm?index",
-   "class": "btn btn-block btn-danger btn-sm"
-  }
- ]
-}

data/edit.htm

@@ -1,572 +0,0 @@
-<!DOCTYPE html>
-<html>
- <head>
-  <title>ESP Editor</title>
-  <style type="text/css" media="screen">
-   .contextMenu{z-index:300;position:absolute;left:5px;border:1px solid #444;background-color:#f5f5f5;display:none;box-shadow:0 0 10px rgba(0,0,0,.4);font-size:12px;font-family:sans-serif;font-weight:bold}
-   .contextMenu ul{list-style:none;top:0;left:0;margin:0;padding:0}
-   .contextMenu li{position:relative;min-width:60px;cursor:pointer}
-   .contextMenu span{color:#444;display:inline-block;padding:6px}
-   .contextMenu li:hover{background:#444}
-   .contextMenu li:hover span{color:#EEE}
-   .css-treeview ul,.css-treeview li{padding:0;margin:0;list-style:none}
-   .css-treeview input{position:absolute;opacity:0}
-   .css-treeview{font:normal 11px Verdana,Arial,Sans-serif;-moz-user-select:none;-webkit-user-select:none;user-select:none}
-   .css-treeview span{color:#00f;cursor:pointer}
-   .css-treeview span:hover{text-decoration:underline}
-   .css-treeview input+label+ul{margin:0 0 0 22px}
-   .css-treeview input ~ ul{display:none}
-   .css-treeview label,.css-treeview label::before{cursor:pointer}
-   .css-treeview input:disabled+label{cursor:default;opacity:.6}
-   .css-treeview input:checked:not(:disabled) ~ ul{display:block}
-   .css-treeview label,.css-treeview label::before{background:url("data:image/png;base64,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") no-repeat}
-   .css-treeview label,.css-treeview span,.css-treeview label::before{display:inline-block;height:16px;line-height:16px;vertical-align:middle}
-   .css-treeview label{background-position:18px 0}
-   .css-treeview label::before{content:"";width:16px;margin:0 22px 0 0;vertical-align:middle;background-position:0 -32px}
-   .css-treeview input:checked+label::before{background-position:0 -16px}
-   @media screen and (-webkit-min-device-pixel-ratio:0){.css-treeview{-webkit-animation:webkit-adjacent-element-selector-bugfix infinite 1s}@-webkit-keyframes webkit-adjacent-element-selector-bugfix{from{padding:0}to{padding:0}}}
-   #uploader{position:absolute;top:0;right:0;left:0;height:28px;line-height:24px;padding-left:10px;background-color:#444;color:#EEE}#tree{position:absolute;top:28px;bottom:0;left:0;width:200px;padding:8px}
-   #editor,#preview{position:absolute;top:28px;right:0;bottom:0;left:200px}
-   #preview{background-color:#EEE;padding:5px}
-  </style>
-  <script>
-
-   var urlXXX = 'http://192.168.211.181';//bolt
-   if (window.location.search.substring(1).split("=")[1]) {
-    urlXXX = 'http://'+window.location.search.substring(1).split("=")[1];
-   } else {
-    urlXXX = 'http://'+window.location.hostname;
-   }
-
-   function createFileUploader(element, tree, editor){
-    var xmlHttp;
-    var input = document.createElement("input");
-    input.type = "file";
-    input.multiple = false;
-    input.name = "data";
-    document.getElementById(element).appendChild(input);
-    var path = document.createElement("input");
-    path.id = "upload-path";
-    path.type = "text";
-    path.name = "path";
-    path.defaultValue = "/";
-    document.getElementById(element).appendChild(path);
-    var button = document.createElement("button");
-    button.innerHTML = 'Upload';
-    document.getElementById(element).appendChild(button);
-    var mkdir = document.createElement("button");
-    mkdir.innerHTML = 'MkDir';
-    document.getElementById(element).appendChild(mkdir);
-    var mkfile = document.createElement("button");
-    mkfile.innerHTML = 'MkFile';
-    document.getElementById(element).appendChild(mkfile);
-
-    function httpPostProcessRequest(){
-     if (xmlHttp.readyState == 4){
-      if(xmlHttp.status != 200) alert("ERROR["+xmlHttp.status+"]: "+xmlHttp.responseText);
-      else {
-       tree.refreshPath(path.value);
-      }
-     }
-    }
-    function createPath(p){
-     xmlHttp = new XMLHttpRequest();
-     xmlHttp.onreadystatechange = httpPostProcessRequest;
-     var formData = new FormData();
-     formData.append("path", p);
-     xmlHttp.open("PUT", urlXXX+"/edit");
-     xmlHttp.send(formData);
-    }
-
-    mkfile.onclick = function(e){
-     if(path.value.indexOf(".") === -1) return;
-     createPath(path.value);
-     editor.loadUrl(path.value);
-    };
-    mkdir.onclick = function(e){
-     if(path.value.length < 2) return;
-     var dir = path.value
-     if(dir.indexOf(".") !== -1){
-      if(dir.lastIndexOf("/") === 0) return;
-      dir = dir.substring(0, dir.lastIndexOf("/"));
-     }
-     createPath(dir);
-    };
-    button.onclick = function(e){
-     if(input.files.length === 0){
-      return;
-     }
-     xmlHttp = new XMLHttpRequest();
-     xmlHttp.onreadystatechange = httpPostProcessRequest;
-     var formData = new FormData();
-     formData.append("data", input.files[0], path.value);
-     xmlHttp.open("POST", urlXXX+"/edit");
-     xmlHttp.send(formData);
-    }
-    input.onchange = function(e){
-     if(input.files.length === 0) return;
-     var filename = input.files[0].name;
-     var ext = /(?:\.([^.]+))?$/.exec(filename)[1];
-     var name = /(.*)\.[^.]+$/.exec(filename)[1];
-     if(typeof name !== undefined){
-      //1197 bolt            if(name.length > 8) name = name.substring(0, 8);
-      filename = name;
-     }
-     if(typeof ext !== undefined){
-      if(ext === "html") ext = "htm";
-      else if(ext === "jpeg") ext = "jpg";
-      filename = filename + "." + ext;
-     }
-     if(path.value === "/" || path.value.lastIndexOf("/") === 0){
-      path.value = "/"+filename;
-     } else {
-      path.value = path.value.substring(0, path.value.lastIndexOf("/")+1)+filename;
-     }
-    }
-   }
-
-   function createTree(element, editor){
-    var preview = document.getElementById("preview");
-    var treeRoot = document.createElement("div");
-    treeRoot.className = "css-treeview";
-    document.getElementById(element).appendChild(treeRoot);
-
-    function loadDownload(path){
-     document.getElementById('download-frame').src = path+"?download=true";
-    }
-
-    function loadPreview(path){
-     document.getElementById("editor").style.display = "none";
-     preview.style.display = "block";
-     preview.innerHTML = '<img src="'+ urlXXX +path+'" style="max-width:100%; max-height:100%; margin:auto; display:block;" />';
-    }
-
-    function fillFolderMenu(el, path){
-     var list = document.createElement("ul");
-     el.appendChild(list);
-     var action = document.createElement("li");
-     list.appendChild(action);
-     var isChecked = document.getElementById(path).checked;
-     var expnd = document.createElement("li");
-     list.appendChild(expnd);
-     if(isChecked){
-      expnd.innerHTML = "<span>Collapse</span>";
-      expnd.onclick = function(e){
-       document.getElementById(path).checked = false;
-       if(document.body.getElementsByClassName('contextMenu').length > 0) document.body.removeChild(el);
-      };
-      var refrsh = document.createElement("li");
-      list.appendChild(refrsh);
-      refrsh.innerHTML = "<span>Refresh</span>";
-      refrsh.onclick = function(e){
-       var leaf = document.getElementById(path).parentNode;
-       if(leaf.childNodes.length == 3) leaf.removeChild(leaf.childNodes[2]);
-       httpGet(leaf, path);
-       if(document.body.getElementsByClassName('contextMenu').length > 0) document.body.removeChild(el);
-      };
-     } else {
-      expnd.innerHTML = "<span>Expand</span>";
-      expnd.onclick = function(e){
-       document.getElementById(path).checked = true;
-       var leaf = document.getElementById(path).parentNode;
-       if(leaf.childNodes.length == 3) leaf.removeChild(leaf.childNodes[2]);
-       httpGet(leaf, path);
-       if(document.body.getElementsByClassName('contextMenu').length > 0) document.body.removeChild(el);
-      };
-     }
-     var upload = document.createElement("li");
-     list.appendChild(upload);
-     upload.innerHTML = "<span>Upload</span>";
-     upload.onclick = function(e){
-      var pathEl = document.getElementById("upload-path");
-      if(pathEl){
-       var subPath = pathEl.value;
-       if(subPath.lastIndexOf("/") < 1) pathEl.value = path+subPath;
-       else pathEl.value = path.substring(subPath.lastIndexOf("/"))+subPath;
-      }
-      if(document.body.getElementsByClassName('contextMenu').length > 0) document.body.removeChild(el);
-     };
-     var delFile = document.createElement("li");
-     list.appendChild(delFile);
-     delFile.innerHTML = "<span>Delete</span>";
-     delFile.onclick = function(e){
-      httpDelete(path);
-      if(document.body.getElementsByClassName('contextMenu').length > 0) document.body.removeChild(el);
-     };
-    }
-
-    function fillFileMenu(el, path){
-     var list = document.createElement("ul");
-     el.appendChild(list);
-     var action = document.createElement("li");
-     list.appendChild(action);
-     if(isTextFile(path)){
-      action.innerHTML = "<span>Edit</span>";
-      action.onclick = function(e){
-       editor.loadUrl(path);
-       if(document.body.getElementsByClassName('contextMenu').length > 0) document.body.removeChild(el);
-      };
-     } else if(isImageFile(path)){
-      action.innerHTML = "<span>Preview</span>";
-      action.onclick = function(e){
-       loadPreview(path);
-       if(document.body.getElementsByClassName('contextMenu').length > 0) document.body.removeChild(el);
-      };
-     }
-     var download = document.createElement("li");
-     list.appendChild(download);
-     download.innerHTML = "<span>Download</span>";
-     download.onclick = function(e){
-      loadDownload(path);
-      if(document.body.getElementsByClassName('contextMenu').length > 0) document.body.removeChild(el);
-     };
-     var delFile = document.createElement("li");
-     list.appendChild(delFile);
-     delFile.innerHTML = "<span>Delete</span>";
-     delFile.onclick = function(e){
-      httpDelete(path);
-      if(document.body.getElementsByClassName('contextMenu').length > 0) document.body.removeChild(el);
-     };
-    }
-
-    function showContextMenu(e, path, isfile){
-     var divContext = document.createElement("div");
-     var scrollTop = document.body.scrollTop ? document.body.scrollTop : document.documentElement.scrollTop;
-     var scrollLeft = document.body.scrollLeft ? document.body.scrollLeft : document.documentElement.scrollLeft;
-     var left = e.clientX + scrollLeft;
-     var top = e.clientY + scrollTop;
-     divContext.className = 'contextMenu';
-     divContext.style.display = 'block';
-     divContext.style.left = left + 'px';
-     divContext.style.top = top + 'px';
-     if(isfile) fillFileMenu(divContext, path);
-     else fillFolderMenu(divContext, path);
-     document.body.appendChild(divContext);
-     var width = divContext.offsetWidth;
-     var height = divContext.offsetHeight;
-     divContext.onmouseout = function(e){
-      if(e.clientX < left || e.clientX > (left + width) || e.clientY < top || e.clientY > (top + height)){
-       if(document.body.getElementsByClassName('contextMenu').length > 0) document.body.removeChild(divContext);
-      }
-     };
-    }
-
-    function createTreeLeaf(path, name, size){
-     var leaf = document.createElement("li");
-     leaf.id = (((path == "/")?"":path)+"/"+name).toLowerCase();
-     var label = document.createElement("span");
-     label.textContent = name.toLowerCase();
-     leaf.appendChild(label);
-     leaf.onclick = function(e){
-      if(isTextFile(leaf.id)){
-       editor.loadUrl(leaf.id);
-      } else if(isImageFile(leaf.id)){
-       loadPreview(leaf.id);
-      }
-     };
-     leaf.oncontextmenu = function(e){
-      e.preventDefault();
-      e.stopPropagation();
-      showContextMenu(e, leaf.id, true);
-     };
-     return leaf;
-    }
-
-    function createTreeBranch(path, name, disabled){
-     var leaf = document.createElement("li");
-     var check = document.createElement("input");
-     check.type = "checkbox";
-     check.id = (((path == "/")?"":path)+"/"+name).toLowerCase();
-     if(typeof disabled !== "undefined" && disabled) check.disabled = "disabled";
-     leaf.appendChild(check);
-     var label = document.createElement("label");
-     label.for = check.id;
-     label.textContent = name.toLowerCase();
-     leaf.appendChild(label);
-     check.onchange = function(e){
-      if(check.checked){
-       if(leaf.childNodes.length == 3) leaf.removeChild(leaf.childNodes[2]);
-       httpGet(leaf, check.id);
-      }
-     };
-     label.onclick = function(e){
-      if(!check.checked){
-       check.checked = true;
-       if(leaf.childNodes.length == 3) leaf.removeChild(leaf.childNodes[2]);
-       httpGet(leaf, check.id);
-      } else {
-       check.checked = false;
-      }
-     };
-     leaf.oncontextmenu = function(e){
-      e.preventDefault();
-      e.stopPropagation();
-      showContextMenu(e, check.id, false);
-     }
-     return leaf;
-    }
-
-    function addList(parent, path, items){
-     var list = document.createElement("ul");
-     parent.appendChild(list);
-     var ll = items.length;
-     //Сортировка файлов
-     items.sort(function(a,b){return (a.name < b.name) ? 1 : ((b.name < a.name) ? -1 : 0);});
-     for(var i = 0; i < ll; i++){
-      var item = items[i];
-      var itemEl;
-      if(item.type === "file"){
-       itemEl = createTreeLeaf(path, item.name, item.size);
-      } else {
-       itemEl = createTreeBranch(path, item.name);
-      }
-      list.appendChild(itemEl);
-     }
-
-    }
-
-    function isTextFile(path){
-     var ext = /(?:\.([^.]+))?$/.exec(path)[1];
-     if(typeof ext !== undefined){
-      switch(ext){
-       case "txt":
-       case "htm":
-       case "html":
-       case "js":
-       case "json":
-       case "c":
-       case "h":
-       case "cpp":
-       case "css":
-       case "xml":
-        return true;
-      }
-     }
-     return false;
-    }
-
-    function isImageFile(path){
-     var ext = /(?:\.([^.]+))?$/.exec(path)[1];
-     if(typeof ext !== undefined){
-      switch(ext){
-       case "png":
-       case "jpg":
-       case "gif":
-       case "ico":
-        return true;
-      }
-     }
-     return false;
-    }
-
-    this.refreshPath = function(path){
-     if(path.lastIndexOf('/') < 1){
-      path = '/';
-      treeRoot.removeChild(treeRoot.childNodes[0]);
-      httpGet(treeRoot, "/");
-     } else {
-      path = path.substring(0, path.lastIndexOf('/'));
-      var leaf = document.getElementById(path).parentNode;
-      if(leaf.childNodes.length == 3) leaf.removeChild(leaf.childNodes[2]);
-      httpGet(leaf, path);
-     }
-    };
-
-    function delCb(path){
-     return function(){
-      if (xmlHttp.readyState == 4){
-       if(xmlHttp.status != 200){
-        alert("ERROR["+xmlHttp.status+"]: "+xmlHttp.responseText);
-       } else {
-        if(path.lastIndexOf('/') < 1){
-         path = '/';
-         treeRoot.removeChild(treeRoot.childNodes[0]);
-         httpGet(treeRoot, "/");
-        } else {
-         path = path.substring(0, path.lastIndexOf('/'));
-         var leaf = document.getElementById(path).parentNode;
-         if(leaf.childNodes.length == 3) leaf.removeChild(leaf.childNodes[2]);
-         httpGet(leaf, path);
-        }
-       }
-      }
-     }
-    }
-
-    function httpDelete(filename){
-     xmlHttp = new XMLHttpRequest();
-     xmlHttp.onreadystatechange = delCb(filename);
-     var formData = new FormData();
-     formData.append("path", filename);
-     xmlHttp.open("DELETE", urlXXX+"/edit");
-     xmlHttp.send(formData);
-    }
-
-    function getCb(parent, path){
-     return function(){
-      if (xmlHttp.readyState == 4){
-       //clear loading
-       if(xmlHttp.status == 200) addList(parent, path, JSON.parse(xmlHttp.responseText));
-      }
-     }
-    }
-
-    function httpGet(parent, path){
-     xmlHttp = new XMLHttpRequest(parent, path);
-     xmlHttp.onreadystatechange = getCb(parent, path);
-     //Для отключения кэша random() иначе будут старые данные
-     xmlHttp.open("GET", urlXXX+"/edit?list=" + path +"&rand="+Math.random(), true);
-     xmlHttp.send(null);
-     //start loading
-    }
-
-    httpGet(treeRoot, "/");
-    return this;
-   }
-
-   function createEditor(element, file, lang, theme, type){
-    function getLangFromFilename(filename){
-     var lang = "plain";
-     var ext = /(?:\.([^.]+))?$/.exec(filename)[1];
-     if(typeof ext !== undefined){
-      switch(ext){
-       case "txt": lang = "plain"; break;
-       case "htm": lang = "html"; break;
-       case "js": lang = "javascript"; break;
-       case "c": lang = "c_cpp"; break;
-       case "cpp": lang = "c_cpp"; break;
-       case "css":
-       case "scss":
-       case "php":
-       case "html":
-       case "json":
-       case "xml":
-        lang = ext;
-      }
-     }
-     return lang;
-    }
-
-    if(typeof file === "undefined") file = "/index.htm";
-
-    if(typeof lang === "undefined"){
-     lang = getLangFromFilename(file);
-    }
-
-    if(typeof theme === "undefined") theme = "textmate";
-
-    if(typeof type === "undefined"){
-     type = "text/"+lang;
-     if(lang === "c_cpp") type = "text/plain";
-    }
-
-    var xmlHttp = null;
-    var editor = ace.edit(element);
-
-    //post
-    function httpPostProcessRequest(){
-     if (xmlHttp.readyState == 4){
-      if(xmlHttp.status != 200) alert("ERROR["+xmlHttp.status+"]: "+xmlHttp.responseText);
-     }
-    }
-    function httpPost(filename, data, type){
-     xmlHttp = new XMLHttpRequest();
-     xmlHttp.onreadystatechange = httpPostProcessRequest;
-     var formData = new FormData();
-     formData.append("data", new Blob([data], { type: type }), filename);
-     xmlHttp.open("POST", urlXXX + "/edit");
-     xmlHttp.send(formData);
-    }
-    //get
-    function httpGetProcessRequest(){
-     if (xmlHttp.readyState == 4){
-      document.getElementById("preview").style.display = "none";
-      document.getElementById("editor").style.display = "block";
-      if(xmlHttp.status == 200) editor.setValue(xmlHttp.responseText);
-      else editor.setValue("");
-      editor.clearSelection();
-     }
-    }
-    function httpGet(theUrl){
-     xmlHttp = new XMLHttpRequest();
-     xmlHttp.onreadystatechange = httpGetProcessRequest;
-     if (theUrl.indexOf("/") == 0)
-      theUrl = urlXXX + theUrl;//bolt
-     xmlHttp.open("GET", theUrl+"?rand="+Math.random(), true);
-     xmlHttp.send(null);
-    }
-
-    if(lang !== "plain") editor.getSession().setMode("ace/mode/"+lang);
-    editor.setTheme("ace/theme/"+theme);
-    editor.$blockScrolling = Infinity;
-    editor.getSession().setUseSoftTabs(true);
-    editor.getSession().setTabSize(2);
-    editor.setHighlightActiveLine(true);
-    editor.setShowPrintMargin(false);
-    editor.commands.addCommand({
-     name: 'saveCommand',
-     bindKey: {win: 'Ctrl-S',  mac: 'Command-S'},
-     exec: function(editor) {
-      httpPost(file, editor.getValue()+"", type);
-     },
-     readOnly: false
-    });
-    editor.commands.addCommand({
-     name: 'undoCommand',
-     bindKey: {win: 'Ctrl-Z',  mac: 'Command-Z'},
-     exec: function(editor) {
-      editor.getSession().getUndoManager().undo(false);
-     },
-     readOnly: false
-    });
-    editor.commands.addCommand({
-     name: 'redoCommand',
-     bindKey: {win: 'Ctrl-Shift-Z',  mac: 'Command-Shift-Z'},
-     exec: function(editor) {
-      editor.getSession().getUndoManager().redo(false);
-     },
-     readOnly: false
-    });
-    httpGet(file);
-    editor.loadUrl = function(filename){
-     file = filename;
-     lang = getLangFromFilename(file);
-     type = "text/"+lang;
-     if(lang !== "plain") editor.getSession().setMode("ace/mode/"+lang);
-     httpGet(file);
-    }
-    return editor;
-   }
-   function onBodyLoad(){
-    var vars = {};
-    //        var s = "http://192.168.211.180/edit/index.htm";
-    var parts = window.location.href.replace(/[?&]+([^=&]+)=([^&]*)/gi, function(m,key,value) { vars[key] = value; });
-    //        var parts = s.replace(/[?&]+([^=&]+)=([^&]*)/gi, function(m,key,value) { vars[key] = value; });
-    if (typeof vars.url !== "undefined" && vars.url != "")
-     urlXXX = "http://" + vars.url;/**/
-    var editor = createEditor("editor", vars.file, vars.lang, vars.theme);
-    var tree = createTree("tree", editor);
-    createFileUploader("uploader", tree, editor);
-   };
-  </script>
-  <script src="https://cdnjs.cloudflare.com/ajax/libs/ace/1.2.6/ace.js" type="text/javascript" charset="utf-8"></script>
-  <script>
-   (function() {
-    window.require(["ace/ace"], function(a) {
-     a && a.config.init(true);
-     if (!window.ace)
-      window.ace = a;
-     for (var key in a) if (a.hasOwnProperty(key))
-      window.ace[key] = a[key];
-    });
-   })();
-  </script>
- </head>
- <body onload="onBodyLoad();">
-  <div id="uploader"></div>
-  <div id="tree"></div>
-  <div id="editor"></div>
-  <div id="preview" style="display:none;"></div>
-  <iframe id=download-frame style='display:none;'></iframe>
- </body>
-</html>

data/firmware.c.txt

@@ -0,0 +1,12 @@
+button 1 na Включить#все Реле 0 1
+button 2 13 Прихожая Реле 0 2
+button 3 14 Кухня Реле 0 3
+pwm 1 3 Яркость#коредор: Реле 1023 4
+pwm 2 4 Яркость#ванная: Реле 510 5
+analog adc 0 Аналоговый#вход Датчики fill-gauge 1 1023 1 1023 6
+logging adc 1 100 Аналоговый#вход Датчики 7
+
+//Это демо конфигурация. В ней показано как связать кнопки c помощью сценариев
+//Кнопка номер 1 связана с кнопкой 2, 3 и с pwm 2
+//Так же продемонстрированна система логгирования данных строкой logging
+//1 - это интервал между точками в минутах, 100 это количество точек 

data/firmware.config.txt

@@ -1,24 +0,0 @@
-button 1 na Включить#все Реле 0 1
-button 2 13 Прихожая Реле 0 2
-button 3 14 Кухня Реле 0 3
-pwm 1 3 Яркость#коредор: Реле 1023 4
-pwm 2 4 Яркость#ванная: Реле 510 5
-//---------------------------------------------------------------------
-analog 0 Аналоговый#вход,#% Датчики progress-round 1 1024 1 1024 6
-inputDigit digit1 При#скольки#включить? Датчики 10 7
-inputDigit digit2 При#скольки#выключить? Датчики 0 8
-button 4 na Нагреватель Датчики 0 9
-//---------------------------------------------------------------------
-button 5 na Вкл#обратный#таймер Таймеры 0 16
-inputDigit digit3 Через#сколько#секунд#включить? Таймеры 5 17
-button 6 na Включится#по#таймеру Таймеры 0 18
-inputTime time1 Во#сколько#включить? Таймеры 20-30-00 19
-button 7 5 Включится#по#таймеру Таймеры 0 20
-//---------------------------------------------------------------------
-switch 1 0 20
-text 1 Вход: Охрана 20
-textSet 1 не#обнаружено-time
-button 8 na Сбросить Охрана 0 21
-//---------------------------------------------------------------------
-button 9 scenario Вкл#выкл#все#сценарии Сценарии 1 23
-button 10 line1,line2, Вкл#выкл#выбранные#сценарии Сценарии 1 24

data/firmware.s.txt

@@ -0,0 +1,13 @@
+button1 = 1
+buttonSet 2 1
+buttonSet 3 1
+pwmSet 2 1024
+end
+button1 = 0
+buttonSet 2 0
+buttonSet 3 0
+pwmSet 2 0
+end
+adc > 50
+buttonSet 2 1
+end

data/firmware.scenario.txt

@@ -1,33 +0,0 @@
-button1 = 1
-buttonSet 2 1
-buttonSet 3 1
-pwmSet 2 1024
-end
-button1 = 0
-buttonSet 2 0
-buttonSet 3 0
-pwmSet 2 0
-end
-analog > digit1
-buttonSet 4 1
-end
-analog < digit2
-buttonSet 4 0
-end
-button5 = 1
-timerStart 1 digit3 sec
-end
-timer1 = 0
-buttonSet 6 1
-end
-timenow = time1
-buttonSet 7 1
-end
-switch1 = 1
-textSet 1 обнаружено#движение-time
-push Внимание обнаружено#движение!
-end
-button8 = 1
-textSet 1 не#обнаружено-time
-buttonSet 8 0
-end

data/index.htm

@@ -1,75 +0,0 @@
-<!DOCTYPE html>
-<html>
- <head>
-  <!--
-Web Developer: Renats Kevrels (ex. Zozula)
-Site: http://www.onclick.lv
-Contact: info [at] onclick.lv
-Skype: renat2985
-Twitter: @Ramzies
-Facebook: http://www.facebook.com/renat2985
-GitHub: https://github.com/renat2985
-From: Latvia, Valmiera
--->
-  <meta http-equiv="Content-type" content="text/html; charset=utf-8">
-  <link rel="shortcut icon" type="image/x-icon" href="favicon.ico">
-  <script defer src="js/build.chart.js?v07.04.2018" charset="utf-8"></script>
-  <!-- <link rel="stylesheet" type="text/css" href="css/chartist.min.css">
-<script src="js/chartist.min.js" charset="utf-8"></script>
-<script type="text/javascript" src="js/chart.js"></script> -->
-  <link rel="stylesheet" type="text/css" href="css/build.css?v07.04.2018">
-  <!-- <link rel="stylesheet" type="text/css" href="css/bootstrap.min.css">
-<link rel="stylesheet" type="text/css" href="css/style.css"> -->
-  <script defer type="text/javascript" src="js/function.js?v07.04.2018"></script>
-  <meta name="viewport" content="width=device-width, initial-scale=1.0">
-  <title></title>
-  <script type="text/javascript">
-   var jsonResponse;
-
-   //function selectTextareaLine(tarea,lineNum) {
-   // lineNum--;
-   // var lines = tarea.value.split("\n");
-   // var startPos = 0, endPos = tarea.value.length;
-   // for(var x = 0; x < lines.length; x++) {
-   //  if(x == lineNum) {break;}
-   //  startPos += (lines[x].length+1);
-   // }
-   // var endPos = lines[lineNum].length+startPos;
-   // if(typeof(tarea.selectionStart) != "undefined") {
-   //  tarea.focus();
-   //  tarea.selectionStart = startPos;
-   //  tarea.selectionEnd = endPos;
-   //  return true;
-   // }
-   // return false;
-   //}
-
-   window.onload = function() {
-    setContent('first');
-   }
-  </script>
- </head>
- <body>
-  <div class="container loader-bg">
-
-   <ul id="url-content" class="hidden" onclick="document.getElementById('content').style.zIndex=0;"></ul>
-   <div id="headers"></div>
-   <div class="row hidden" id="container_column">
-    <h1 id="title"></h1>
-    <div id="content" onclick="this.style.zIndex=10"></div>
-   </div>
-   <div id="footer"></div>
-   <div id="edit-content" class="hidden" onclick="document.getElementById('content').style.zIndex=0;">
-    <a target="_blank" style="position:fixed;right:0;color:#000;" href="https://github.com/tretyakovsa/Sonoff_WiFi_switch/wiki/%D0%92%D0%BE%D0%B7%D0%BC%D0%BE%D0%B6%D0%BD%D0%BE%D1%81%D1%82%D0%B8-page.htm%3F*" title="Github wiki"><i class="help-img"></i>wiki</a>
-    <textarea class="form-control" onkeyup="isValidJson(this.value,'edit-json')" spellcheck="false" id="edit-json"></textarea>
-    <div id="error-json"></div>
-    <div class="btn-group btn-block">
-     <input class="btn btn-success" style="width:40%" id="edit-view" onclick="setContent('edit');this.value='Loading...';html('url-content', ' ');" value="View" type="button">
-     <input class="btn btn-danger" style="width:40%" id="edit-save" onclick="var urlPages=window.location.search.substring(1).split('&')[0];httpDelete('/'+urlPages+'.json.gz');send_request_edit(this, val('edit-json'),(urlPages?urlPages:'index')+'.json');toggle('edit-content');toggle('url-content');" value="Save" type="button">
-     <a class="btn btn-info" style="width:20%" href="#" id="download-json" download="" title="Save to PC"><i class="download-img"></i></a>
-    </div>
-   </div>
-
-  </div>
- </body>
-</html>

data/index.json

@@ -1,93 +1,69 @@
 {
-	"configs": [
-		"/config.live.json",
-		"/config.setup.json"
-	],
-	"title": "Главная",
-	"class": "col-sm-offset-1 col-sm-10 col-md-offset-2 col-md-8 col-lg-offset-3 col-lg-6",
-	"content": [
-		{
-			"type": "h5",
-			"title": "{{SSDP}}",
-			"class": "alert-warning"
+  "configs": [
+    "/config.live.json",
+    "/config.setup.json",
+    "/lang/lang.ru.json"
+  ],
+  "title": "Главная",
+  "class": "col-sm-offset-1 col-sm-10 col-md-offset-2 col-md-8 col-lg-offset-3 col-lg-6",
+  "content": [
+    {
+      "type": "h5",
+      "title": "{{name}}",
+      "class": "alert-default"
+    },
+    {
+			"type": "text",
+			"class": "alert alert-light",
+			"title": "<center><img src='/icon.jpeg' alt='IoT Manager'></center>"
 		},
-		{
-			"type": "h4",
-			"title": "Device ID: {{chipID}}"
-		},
-		{
-			"type": "h4",
-			"title": "IP address: {{ip}}"
-		},
-		{
-            "type": "h4",
-            "title": "Uptime: {{uptime}}"
-         },
-		{
-			"type": "h4",
-			"title": "Build version: {{firmware_version}}"
-		},
-		{
-			"type": "h4",
-			"title": "SPIFFS version: 2.2"
-		},
-		{
-			"type": "link",
-			"title": "Конфигурация устройства",
-			"action": "/page.htm?configuration",
-			"class": "btn btn-block btn-primary"
-		},
-		{
-			"type": "hr"
-		},
-		{
-			"type": "link",
-			"title": "Конфигурация WIFI",
-			"action": "/page.htm?setup",
-			"class": "btn btn-block btn-success"
-		},
-		{
-			"type": "link",
-			"title": "Конфигурация MQTT",
-			"action": "/page.htm?mqtt",
-			"class": "btn btn-block btn-success"
-		},
-		{
-			"type": "link",
-			"title": "Конфигурация push",
-			"action": "/page.htm?pushingbox",
-			"class": "btn btn-block btn-success"
-		},
-		{
-			"type": "hr"
-		},
-		{
-         "type":"h3",
-         "name":"my-block",
-         "style":"position:fixed;top:30%;left:50%;width:400px;margin-left:-200px;text-align:center;",
-         "class":"hidden"
-         },
-		{
-         "type": "button",
-         "title":"Обновить прошивку",
-         "action": "/upgrade",
-         "response":"[[my-block]]",
-         "class": "btn btn-block btn-success"
-        },
-		{
-			"type": "hr"
-		},
-		{
-			"type": "link",
-			"title": "Скачать приложение IoT Manager для android",
-			"action": "https://play.google.com/store/apps/details?id=ru.esp8266.iotmanager",
-			"class": "btn btn-block btn-warning"
-		},
-		{
-			"type": "link",
-			"title": "Скачать приложение IoT Manager для iphone",
-			"action": "https://apps.apple.com/ru/app/iot-manager/id1155934877",
-			"class": "btn btn-block btn-warning"
-		}
-	]
+    {
+      "type": "link",
+      "title": "Конфигурация устройства",
+      "action": "/?set.device",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "link",
+      "title": "Список других устройств в сети",
+      "action": "/?set.udp",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "link",
+      "title": "Конфигурация WIFI",
+      "action": "/?set.wifi",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "link",
+      "title": "Конфигурация MQTT",
+      "action": "/?set.mqtt",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "link",
+      "title": "Конфигурация push",
+      "action": "/?set.push",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "link",
+      "title": "Утилиты",
+      "action": "/?set.utilities",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "link",
+      "title": "Скачать приложение IoT Manager для android",
+      "action": "https://play.google.com/store/apps/details?id=ru.esp8266.iotmanager",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "link",
+      "title": "Скачать приложение IoT Manager для iphone",
+      "action": "https://apps.apple.com/ru/app/iot-manager/id1155934877",
+      "class": "btn btn-block btn-default"
+    }
+  ]
 }

data/lang/lang.ru.json

@@ -0,0 +1,39 @@
+{
+    "SetDevConf": "Конфигурация устройства",
+    "SetDevPreset": "Выберите из списка подходящий пресет кофигурации",
+
+    "ButSave":"Сохранить",
+    "ButMainPage":"Главная",
+
+
+    "SetUDPList": "Список других устройств в сети:",
+    "SetUDPWarn1": "После нажатия на кнопку <b>переформировать список устройств</b> ждите примерно минуту, а затем обновите страницу и список появится вновь",
+
+    "SetUDPUpdateList":"Переформировать список устройств",
+    "SetUDPUpdatePage":"Обновить страницу",
+    "SetUDPNameOfDev":"Имя этого устройства:",
+    "SetUDPDateExchange":"Включить обмен данными между устройствами",
+    "SetUDPWarn2":"Если обмен данными включен, то устройства будут обмениваться широковещательными пакетами udp для формирования списка устройств и для осуществления посылки настроек mqtt. Данный обмен создает дополнительную нагрузку на wifi сеть.",
+
+    "SetWiFiNameOfDev":"Имя устройства:",
+    "SetWiFiRouterConnect":"Подключение к WiFi роутеру:",
+    "SetWiFiAccessPoint":"Точка доступа:",
+    "SetWiFiWeb":"Логин и пароль web interface:",
+    "SetWiFiTimeZone":"Временная зона:",
+    "SetWiFiNTP":"Сервер NTP:",
+    "SetWiFiWarn1":"Имя устройства должно состоять из английских букв и иметь длинну от 6 до 12 символов",
+    "SetWiFiWarn2":"После того как вы введете логин пароль от вашего wifi роутера необходимо нажать кнопку сохранить, а затем обязательно нажать кнопку <b>перезагрузить устройство</b> внизу этой страницы",
+    "SetWiFiWarn3":"Устройство постоянно сканирует сеть на наличие wifi. Если роутер отключен, то устройство автоматически перейдет в режим точки доступа. Когда wifi появится устройство автоматически подключится к роутеру снова, и выключит точку доступа",
+    "SetWiFiWarn4":"После изменения поля <b>NTP сервер</b> необходимо перезагрузить устройство",
+    "SetWiFiWarn5":"Светодиод статуса подключения показывает четыре состояния подключения: <br><b>1. мигает редко</b> - идет подключение к wifi <br><b>2. мигает часто</b> - идет подключение к серверу mqtt <br><b>3. горит постоянно</b> - модуль в режиме точки доступа, <br><b>4. не горит</b> - модуль подключен к wifi и к mqtt. <br>Светодиод подключен к gpio2. Если галочка стоит - то использовать этот пин нельзя",
+
+    "SetMQTTServerName":"Имя сервера:",
+    "SetMQTTPort":"Номер порта:",
+    "SetMQTTPrefix":"Префикс:",
+    "SetMQTTUserName":"Имя пользователя:",
+    "SetMQTTPassword":"Пароль:",
+
+    "SetMQTTSendSettings":"Отправить настройки MQTT с этого устройства на все остальные",
+    "SetMQTTWarn1":"Обратите внимание что поле префикс может состоять только из одного слова и одного разделителя: <b>/prefix</b>, вариант вида: <b>/prefix1/prefix2</b> работать не будет. После изменения поля prefix необходимо перезагрузить устройство",
+    "SetMQTTWarn2":"Прежде чем нажимать на кнопку <b>Отправить настройки MQTT</b> сохрание их, если Вы их меняли. Настройки получат и перезапишут все устройства в локальной сети"
+}

data/mqtt.json

@@ -1,79 +0,0 @@
-{
- "configs": [
-"/config.setup.json"
- ],
- "class":"col-sm-offset-1 col-sm-10 col-md-offset-2 col-md-8 col-lg-offset-3 col-lg-6",
- "content": [
-  {
-   "type": "h5",
-   "title": "{{SSDP}}",
-   "class":"alert-warning"
-  },
- {
-   "type": "h4",
-   "title": "Server name:"
-  },
-{
-   "type": "input",
-   "title": "",
-   "name":"1",
-   "state": "{{mqttServer}}"
-  },
-{
-   "type": "h4",
-   "title": "Port:"
-  },
-{
-   "type": "input",
-   "title": "",
-   "name":"2",
-   "state": "{{mqttPort}}"
-  },
-{
-   "type": "h4",
-   "title": "User name:"
-  },
-{
-   "type": "input",
-   "title": "",
-   "name":"3",
-   "state": "{{mqttUser}}"
-  },
-{
-   "type": "h4",
-   "title": "Password:"
-  },
-{
-   "type": "input",
-   "title": "",
-   "name":"4",
-   "state": "{{mqttPass}}"
-  },
-{
-  "type":"h3",
-  "name":"my-block",
-"style":"position:fixed;top:30%;left:50%;width:400px;margin-left:-200px;text-align:center;",
-  "class":"hidden"
- },
-{
-   "type": "button",
-  "title":"Сохранить",
-    "action": "mqttSave?mqttServer=[[1]]&mqttPort=[[2]]&mqttUser=[[3]]&mqttPass=[[4]]",
-    "response":"[[my-block]]",
-   "class": "btn btn-block btn-success",
-   "style": "width:100%;display:inline"
-  },
-  {
-   "type": "link",
-   "title": "Перезагрузить устройство",
-   "action": "javascript:if(confirm(renameBlock(jsonResponse,'Перезагрузить?'))){send_request(this,'/restart?device=ok');}",
-   "class": "btn btn-block btn-warning"
-  },
-  {
-   "type": "link",
-   "title": "Главная",
-   "action": "/page.htm?index",
-   "class": "btn btn-block btn-danger btn-sm"
-  }
- ]
-}

data/push.json

@@ -1,92 +0,0 @@
-{
- "configs": [
-"/config.setup.json"
- ],
- "class":"col-sm-offset-1 col-sm-10 col-md-offset-2 col-md-8 col-lg-offset-3 col-lg-6",
- "content": [
-  {
-   "type": "h5",
-   "title": "{{SSDP}}",
-   "class":"alert-warning"
-  },
- {
-   "type": "h4",
-   "title": "Host name:"
-  },
-{
-   "type": "input",
-   "title": "",
-   "name":"1",
-   "state": "{{pushHost}}"
-  },
-{
-   "type": "h4",
-   "title": "Port:"
-  },
-{
-   "type": "input",
-   "title": "",
-   "name":"2",
-   "state": "{{pushPort}}"
-  },
-{
-   "type": "h4",
-   "title": "Fingerprint:"
-  },
-{
-   "type": "input",
-   "title": "",
-   "name":"3",
-   "state": "{{pushFingerprint}}"
-  },
-{
-   "type": "h4",
-   "title": "Access Token:"
-  },
-{
-   "type": "input",
-   "title": "",
-   "name":"4",
-   "state": "{{pushAccessToken}}"
-  },
-{
-  "type":"h3",
-  "name":"my-block",
-"style":"position:fixed;top:30%;left:50%;width:400px;margin-left:-200px;text-align:center;",
-  "class":"hidden"
- },
-{
-   "type": "button",
-  "title":"Сохранить и проверить соединение",
-    "action": "pushDate?pushHost=[[1]]&pushPort=[[2]]&pushFingerprint=[[3]]&pushAccessToken=[[4]]",
-    "response":"[[my-block]]",
-   "class": "btn btn-block btn-success",
-   "style": "width:100%;display:inline"
-  },
-{
-   "type": "hr"
-  },
-{
-"type": "checkbox",
-"name":"start-push",
-"title": "Отправлять push при включении устройства",
-"action": "startPush?status=[[start-push]]",
-"state": "{{startPush}}"
-},
-{
-   "type": "hr"
-  },
- {
-   "type": "link",
-   "title": "Перезагрузить устройство",
-   "action": "javascript:if(confirm(renameBlock(jsonResponse,'Перезагрузить?'))){send_request(this,'/restart?device=ok');}",
-   "class": "btn btn-block btn-warning"
-  },
-  {
-   "type": "link",
-   "title": "Главная",
-   "action": "/page.htm?index",
-   "class": "btn btn-block btn-danger btn-sm"
-  }
- ]
-}

data/pushingbox.json

@@ -1,46 +0,0 @@
-{
- "configs": [
-"/config.setup.json"
- ],
- "class":"col-sm-offset-1 col-sm-10 col-md-offset-2 col-md-8 col-lg-offset-3 col-lg-6",
- "content": [
-  {
-   "type": "h5",
-   "title": "{{SSDP}}",
-   "class":"alert-warning"
-  },
- {
-   "type": "h4",
-   "title": "Device id:"
-  },
-{
-   "type": "input",
-   "title": "",
-   "name":"1",
-   "state": "{{pushingbox_id}}"
-  },
-
-{
-   "type": "button",
-  "title":"Сохранить",
-    "action": "pushingboxDate?pushingbox_id=[[1]]",
-   "class": "btn btn-block btn-success",
-   "style": "width:100%;display:inline"
-  },
-{
-   "type": "hr"
-  },
- {
-   "type": "link",
-   "title": "Перезагрузить устройство",
-   "action": "javascript:if(confirm(renameBlock(jsonResponse,'Перезагрузить?'))){send_request(this,'/restart?device=ok');}",
-   "class": "btn btn-block btn-warning"
-  },
-  {
-   "type": "link",
-   "title": "Главная",
-   "action": "/page.htm?index",
-   "class": "btn btn-block btn-danger btn-sm"
-  }
- ]
-}

data/set.device.json

@@ -0,0 +1,143 @@
+{
+  "configs": [
+    "/config.setup.json",
+    "/config.option.json",
+    "/config.live.json",
+    "/lang/lang.ru.json"
+  ],
+  "class": "col-sm-offset-1 col-sm-10",
+  "content": [
+    {
+      "type": "h5",
+      "title": "{{name}}",
+      "class": "alert-default"
+    },
+    {
+      "type": "link",
+      "title": "{{ButMainPage}}",
+      "action": "/",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "h4",
+      "title": "Device ID: {{chipID}}"
+    },
+    {
+      "type": "h4",
+      "title": "IP address: {{ip}}"
+    },
+    {
+      "type": "h4",
+      "title": "Time: {{time}}"
+    },
+    {
+      "type": "h4",
+      "title": "Uptime: {{uptime}}"
+    },
+    {
+      "type": "h4",
+      "title": "Build version: {{firmware_version}}"
+    },
+    {
+      "type": "h4",
+      "title": "SPIFFS version: 2.3.3"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "dropdown",
+      "name": "help-url",
+      "class": "btn btn-default",
+      "style": "display:inline",
+      "title": {
+        "#": "{{SetDevPreset}}<span class=\"caret\"></span>",
+        "/set?preset=1": "1.Вкл. выкл. локального реле",
+        "/set?preset=2": "2.Вкл. выкл. локального реле в определенное время",
+        "/set?preset=3": "3.Вкл. выкл. локального реле на определенный период времени",
+        "/set?preset=4": "4.Вкл. выкл. нескольких локальных реле кнопкой в приложении",
+        "/set?preset=5": "5.Вкл. выкл. локального реле физической кнопкой и кнопкой в приложении параллельно (для выключателя света)",
+        "/set?preset=6": "6.Вкл. выкл. нескольких удаленных реле кнопкой в приложении (нужно указать Device ID)",
+        "/set?preset=7": "7.Вкл. выкл. нескольких удаленных реле физической кнопкой (нужно указать Device ID)",
+        "/set?preset=8": "8.Широтно импульсная модуляция",
+        "/set?preset=9": "9.Сенсор DHT11 (темп, влажность) и логгирование",
+        "/set?preset=10": "10.Сенсор DHT22, DHT33, DHT44, AM2302, RHT03 (темп, влажность) и логгирование",
+        "/set?preset=11": "11.Аналоговый сенсор и логгирование",
+        "/set?preset=12": "12.Cенсор bmp280 (темп, давление) и логгирование",
+        "/set?preset=13": "13.Cенсор bme280 (темп, давление, влажность, высота) и логгирование",
+        "/set?preset=14": "12.Сенсор DS18B20 (темп) и логгирование",
+        "/set?preset=15": "13.Термостат на DS18B20 с переключением в ручной режим и логгированием",
+        "/set?preset=16": "14.Котроль уровня в баке (датчик расстояния) на сенсорах: JSN-SR04T, HC-SR04, HY-SRF05 и логгирование",
+        "/set?preset=17": "15.Датчик движения включающий свет",
+        "/set?preset=18": "16.Охранный датчик движения",
+        "/set?preset=19": "17.Система управления шаговыми двигателями на основе драйвера A4988 (открытие закрытие штор)",
+        "/set?preset=20": "18.Система управления сервоприводами",
+        "/set?preset=21": "Настройки по умолчанию"
+      }
+    },
+    {
+      "type": "h2",
+      "title": "{{SetDevConf}}"
+    },
+    {
+      "type": "file",
+      "state": "firmware.c.txt",
+      "style": "width:100%;height:350px",
+      "title": "Сохранить",
+      "action": "/set?devinit",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "h2",
+      "title": "Сценарии"
+    },
+    {
+      "type": "checkbox",
+      "name": "scen",
+      "title": "Включить сценарии",
+      "action": "/set?scen=[[scen]]",
+      "state": "{{scen}}"
+    },
+    {
+      "type": "file",
+      "state": "firmware.s.txt",
+      "style": "width:100%;height:350px",
+      "title": "Сохранить",
+      "action": "/set?sceninit",
+      "class": "btn btn-block btn-default"
+    },
+    
+    {
+      "type": "link",
+      "title": "Инструкция к системе автоматизации",
+      "action": "https://github.com/DmitryBorisenko33/esp32-esp8266_iot-manager_modules_firmware/wiki/Instruction",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "link",
+      "title": "Очистить логи сенсоров",
+      "action": "/set?cleanlog",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "h3",
+      "name": "my-block",
+      "style": "position:fixed;top:50%;left:50%;width:400px;margin-left:-200px;text-align:center;",
+      "class": "hidden"
+    },
+   
+    {
+      "type": "button",
+      "title": "Обновить прошивку устройства",
+      "action": "/check",
+      "response": "[[my-block]]",
+      "class": "btn btn-block btn-default"
+    }
+  ]
+}

data/set.mqtt.json

@@ -0,0 +1,133 @@
+{
+  "configs": [
+    "/config.setup.json",
+    "/lang/lang.ru.json"
+  ],
+  "class": "col-sm-offset-1 col-sm-10 col-md-offset-2 col-md-8 col-lg-offset-3 col-lg-6",
+  "content": [
+    {
+      "type": "h5",
+      "title": "{{name}}",
+      "class": "alert-default"
+      
+    },
+    {
+      "type": "link",
+      "title": "{{ButMainPage}}",
+      "action": "/",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "hr"
+    },
+   
+    {
+      "type": "h4",
+      "title": "{{SetMQTTServerName}}",
+      "style": "width:60%;float:left;"
+    },
+    {
+      "type": "input",
+      "title": "",
+      "name": "mqttServer-arg",
+      "state": "{{mqttServer}}",
+      "style": "width:40%;float:right"
+    },
+    {
+      "type": "h4",
+      "title": "{{SetMQTTPort}}",
+      "style": "width:60%;float:left;"
+    },
+    {
+      "type": "input",
+      "title": "",
+      "name": "mqttPort-arg",
+      "state": "{{mqttPort}}",
+      "style": "width:40%;float:right"
+    },
+    {
+      "type": "h4",
+      "title": "{{SetMQTTPrefix}}",
+      "style": "width:60%;float:left;"
+    },
+    {
+      "type": "input",
+      "title": "",
+      "name": "mqttPrefix-arg",
+      "state": "{{mqttPrefix}}",
+      "style": "width:40%;float:right"
+    },
+    {
+      "type": "h4",
+      "title": "{{SetMQTTUserName}}",
+      "style": "width:60%;float:left;"
+    },
+    {
+      "type": "input",
+      "title": "",
+      "name": "mqttUser-arg",
+      "state": "{{mqttUser}}",
+      "style": "width:40%;float:right"
+    },
+    {
+      "type": "h4",
+      "title": "{{SetMQTTPassword}}",
+      "style": "width:60%;float:left;"
+    },
+    {
+      "type": "input",
+      "title": "",
+      "name": "mqttPass-arg",
+      "state": "{{mqttPass}}",
+      "style": "width:40%;float:right"
+    },
+    {
+      "type": "h3",
+      "name": "my-block",
+      "style": "position:fixed;top:30%;left:50%;width:400px;margin-left:-200px;text-align:center;",
+      "class": "hidden"
+    },
+    
+    {
+      "type": "button",
+      "title": "{{ButSave}}",
+      "style": "width:100%;float:left;",
+      "action": "set?mqttServer=[[mqttServer-arg]]&mqttPort=[[mqttPort-arg]]&mqttPrefix=[[mqttPrefix-arg]]&mqttUser=[[mqttUser-arg]]&mqttPass=[[mqttPass-arg]]",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "button",
+      "style": "width:100%;float:left;",
+      "title": "{{SetMQTTSendSettings}}",
+      "action": "set?mqttsend",
+      "class": "btn btn-block btn-default"
+    },
+    
+    {
+      "type": "button",
+      "style": "width:100%;float:left;",
+      "title": "Проверить соединение с MQTT",
+      "action": "set?mqttcheck",
+      "response": "[[my-block]]",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "text",
+      "style": "width:100%;float:left;",
+      "title": "<div style='margin-top:10px;margin-bottom:10px;'><font color='black'><p style='border: 1px solid #DCDCDC; border-radius: 3px; background-color: #F5F5F5; padding: 10px;'>{{SetMQTTWarn1}}</p></font></div>"
+     
+    },
+    {
+      "type": "text",
+      "style": "width:100%;float:left;",
+      "title": "<div style='margin-top:10px;margin-bottom:10px;'><font color='black'><p style='border: 1px solid #DCDCDC; border-radius: 3px; background-color: #F5F5F5; padding: 10px;'>{{SetMQTTWarn2}}</p></font></div>"
+    },
+    {
+      "type": "link",
+      "style": "width:100%;float:left;",
+      "title": "Перезагрузить устройство",
+      "action": "javascript:if(confirm(renameBlock(jsonResponse,'Перезагрузить?'))){send_request(this,'/restart?device=ok');}",
+      "class": "btn btn-block btn-danger"
+    }
+  ]
+}

data/set.push.json

@@ -0,0 +1,51 @@
+{
+  "configs": [
+    "/config.setup.json",
+    "/lang/lang.ru.json"
+  ],
+  "class": "col-sm-offset-1 col-sm-10 col-md-offset-2 col-md-8 col-lg-offset-3 col-lg-6",
+  "content": [
+    {
+      "type": "h5",
+      "title": "{{name}}",
+      "class": "alert-default"
+    },
+    {
+      "type": "link",
+      "title": "{{ButMainPage}}",
+      "action": "/",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "h4",
+      "style": "width:60%;float:left;",
+      "title": "Device id:"
+    },
+    {
+      "type": "input",
+      "title": "",
+      "name": "push-arg",
+      "style": "width:40%;float:right",
+      "state": "{{pushingboxid}}"
+    },
+    {
+      "type": "button",
+      "title": "{{ButSave}}",
+      "action": "set?pushingboxid=[[push-arg]]",
+      "class": "btn btn-block btn-default",
+      "style": "width:100%;display:inline"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "link",
+      "title": "Перезагрузить устройство",
+      "action": "javascript:if(confirm(renameBlock(jsonResponse,'Перезагрузить?'))){send_request(this,'/restart?device=ok');}",
+      "class": "btn btn-block btn-danger"
+    }
+  ]
+}

data/set.udp.json

@@ -0,0 +1,96 @@
+{
+  "configs": [
+    "/config.setup.json",
+    "/lang/lang.ru.json"
+  ],
+  "title": "Главная",
+  "class": "col-sm-offset-1 col-sm-10 col-md-offset-2 col-md-8 col-lg-offset-3 col-lg-6",
+  "content": [
+    {
+      "type": "h5",
+      "title": "{{name}}",
+      "class": "alert-default"
+    },
+    {
+      "type": "link",
+      "title": "{{ButMainPage}}",
+      "action": "/",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "h3",
+      "title": "{{SetUDPList}}"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "csv",
+      "title": [
+        "html",
+        "html",
+        "html"
+      ],
+      "state": "dev.csv",
+      "style": "width:100%;",
+      "class": "nan"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "link",
+      "title": "{{SetUDPUpdateList}}",
+      "action": "/set?updatelist",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "link",
+      "title": "{{SetUDPUpdatePage}}",
+      "action": "/set?updatepage",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "text",
+      "title": "<div style='margin-top:10px;margin-bottom:10px;'><font color='black'><p style='border: 1px solid #DCDCDC; border-radius: 3px; background-color: #F5F5F5; padding: 10px;'>{{SetUDPWarn1}}</p></font></div>",
+      "style": "width:100%;float:left;"
+    },
+    {
+      "type": "h3",
+      "title": "{{SetUDPNameOfDev}}"
+    },
+    {
+      "type": "input",
+      "title": "{{SetUDPNameOfDev}}",
+      "name": "devname-arg",
+      "state": "{{name}}",
+      "pattern": "[A-Za-z0-9]{6,12}"
+    },
+    {
+      "type": "button",
+      "title": "{{ButSave}}",
+      "action": "/set?devname=[[devname-arg]]",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "checkbox",
+      "name": "udponoff",
+      "title": "{{SetUDPDateExchange}}",
+      "action": "/set?udponoff=[[udponoff]]",
+      "state": "{{udponoff}}"
+    },
+    {
+      "type": "text",
+      "title": "<div style='margin-top:10px;margin-bottom:10px;'><font color='black'><p style='border: 1px solid #DCDCDC; border-radius: 3px; background-color: #F5F5F5; padding: 10px;'>{{SetUDPWarn2}}</p></font></div>"
+    }
+  ]
+}

data/set.utilities.json

@@ -0,0 +1,39 @@
+{
+  "configs": [
+    "/config.live.json",
+    "/config.setup.json",
+    "/lang/lang.ru.json"
+  ],
+  "title": "Главная",
+  "class": "col-sm-offset-1 col-sm-10 col-md-offset-2 col-md-8 col-lg-offset-3 col-lg-6",
+  "content": [
+    {
+      "type": "h5",
+      "title": "{{name}}",
+      "class": "alert-default"
+    },
+    {
+      "type": "link",
+      "title": "{{ButMainPage}}",
+      "action": "/",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "h3",
+      "title": "Сканирование адресов шины i2c"
+    },
+    {
+      "type": "h4",
+      "title": "{{i2c}}"
+    },
+    {
+      "type": "link",
+      "title": "Сканировать",
+      "action": "/set?itoc",
+      "class": "btn btn-block btn-default"
+    }
+  ]
+}

data/set.wifi.json

@@ -0,0 +1,185 @@
+{
+  "configs": [
+    "/config.setup.json",
+    "/lang/lang.ru.json"
+  ],
+  "title": "Конфигурация",
+  "class": "col-sm-offset-1 col-sm-10 col-md-offset-2 col-md-8 col-lg-offset-3 col-lg-6",
+  "content": [
+    {
+      "type": "h5",
+      "title": "{{name}}",
+      "class": "alert-default"
+    },
+    {
+      "type": "link",
+      "title": "{{ButMainPage}}",
+      "action": "/",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "h3",
+      "title": "{{SetWiFiNameOfDev}}"
+    },
+    {
+      "type": "input",
+      "title": "{{SetWiFiNameOfDev}}",
+      "name": "devname-arg",
+      "state": "{{name}}",
+      "pattern": "[A-Za-z0-9]{6,12}"
+    },
+    {
+      "type": "button",
+      "title": "{{ButSave}}",
+      "action": "set?devname=[[devname-arg]]",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "text",
+      "title": "<div style='margin-top:10px;margin-bottom:10px;'><font color='black'><p style='border: 1px solid #DCDCDC; border-radius: 3px; background-color: #F5F5F5; padding: 10px;'>{{SetWiFiWarn1}}</p></font></div>"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "h3",
+      "title": "{{SetWiFiRouterConnect}}"
+    },
+    {
+      "type": "input",
+      "title": "",
+      "name": "routerssid-arg",
+      "state": "{{routerssid}}"
+    },
+    {
+      "type": "password",
+      "title": "",
+      "name": "routerpass-arg",
+      "state": "{{routerpass}}"
+    },
+    {
+      "type": "button",
+      "title": "{{ButSave}}",
+      "class": "btn btn-block btn-default",
+      "action": "set?routerssid=[[routerssid-arg]]&routerpass=[[routerpass-arg]]"
+    },
+    {
+      "type": "text",
+      "title": "<div style='margin-top:10px;margin-bottom:10px;'><font color='black'><p style='border: 1px solid #DCDCDC; border-radius: 3px; background-color: #F5F5F5; padding: 10px;'>{{SetWiFiWarn2}}</p></font></div>"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "checkbox",
+      "name": "blink",
+      "title": "Включить светодиод статуса подключения",
+      "action": "/set?blink=[[blink]]",
+      "state": "{{blink}}"
+    },
+    {
+      "type": "text",
+      "title": "<div style='margin-top:10px;margin-bottom:10px;'><font color='black'><p style='border: 1px solid #DCDCDC; border-radius: 3px; background-color: #F5F5F5; padding: 10px;'>{{SetWiFiWarn5}}</p></font></div>"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "h3",
+      "title": "{{SetWiFiAccessPoint}}"
+    },
+    {
+      "type": "input",
+      "title": "",
+      "name": "apssid-arg",
+      "state": "{{apssid}}",
+      "pattern": ".{1,20}"
+    },
+    {
+      "type": "password",
+      "title": "",
+      "name": "appass-arg",
+      "state": "{{appass}}",
+      "pattern": ".{8,20}"
+    },
+    {
+      "type": "button",
+      "title": "{{ButSave}}",
+      "action": "set?apssid=[[apssid-arg]]&appass=[[appass-arg]]",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "text",
+      "title": "<div style='margin-top:10px;margin-bottom:10px;'><font color='black'><p style='border: 1px solid #DCDCDC; border-radius: 3px; background-color: #F5F5F5; padding: 10px;'>{{SetWiFiWarn3}}</p></font></div>"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "h3",
+      "title": "{{SetWiFiWeb}}"
+    },
+    {
+      "type": "input",
+      "title": "Логин",
+      "name": "weblogin-arg",
+      "state": "{{weblogin}}",
+      "pattern": ".{1,20}"
+    },
+    {
+      "type": "password",
+      "title": "Пароль",
+      "name": "webpass-arg",
+      "state": "{{webpass}}",
+      "pattern": ".{1,20}"
+    },
+    {
+      "type": "button",
+      "title": "{{ButSave}}",
+      "action": "set?weblogin=[[weblogin-arg]]&webpass=[[webpass-arg]]",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "h3",
+      "title": "{{SetWiFiTimeZone}}"
+    },
+    {
+      "type": "input",
+      "title": "",
+      "name": "timezone-arg",
+      "state": "{{timezone}}",
+      "pattern": ".{1,20}"
+    },
+    {
+      "type": "input",
+      "title": "",
+      "name": "ntp-arg",
+      "state": "{{ntp}}"
+    },
+    {
+      "type": "button",
+      "title": "{{ButSave}}",
+      "action": "set?timezone=[[timezone-arg]]&ntp=[[ntp-arg]]",
+      "class": "btn btn-block btn-default"
+    },
+    {
+      "type": "text",
+      "title": "<div style='margin-top:10px;margin-bottom:10px;'><font color='black'><p style='border: 1px solid #DCDCDC; border-radius: 3px; background-color: #F5F5F5; padding: 10px;'>{{SetWiFiWarn4}}</p></font></div>"
+    },
+    {
+      "type": "hr"
+    },
+    {
+      "type": "link",
+      "title": "Перезагрузить устройство",
+      "action": "javascript:if(confirm(renameBlock(jsonResponse,'Перезагрузить?'))){send_request(this,'/set?device=ok');}",
+      "class": "btn btn-block btn-danger"
+    }
+  ]
+}