mirror of
https://github.com/IoTManagerProject/IoTManager.git
synced 2026-03-30 11:59:12 +03:00
131 lines
3.5 KiB
C++
131 lines
3.5 KiB
C++
/*
|
|
* FtpServer esp32 with FFat and EthernetENC (or UIPEthernet)
|
|
*
|
|
* AUTHOR: Renzo Mischianti
|
|
*
|
|
* https://www.mischianti.org/2020/02/08/ftp-server-on-esp8266-and-esp32
|
|
*
|
|
*/
|
|
|
|
#include "Arduino.h"
|
|
#include <SPI.h>
|
|
#include <EthernetENC.h>
|
|
|
|
#include "FS.h"
|
|
#include "FFat.h"
|
|
|
|
#include <SimpleFTPServer.h>
|
|
|
|
#define MACADDRESS 0x00,0x01,0x02,0x03,0x04,0x05
|
|
#define MYIPADDR 192,168,1,28
|
|
#define MYIPMASK 255,255,255,0
|
|
#define MYDNS 192,168,1,1
|
|
#define MYGW 192,168,1,1
|
|
|
|
uint8_t macaddress[6] = {MACADDRESS};
|
|
|
|
FtpServer ftpSrv; //set #define FTP_DEBUG in ESP8266FtpServer.h to see ftp verbose on serial
|
|
|
|
void _callback(FtpOperation ftpOperation, unsigned int freeSpace, unsigned int totalSpace){
|
|
Serial.print(">>>>>>>>>>>>>>> _callback " );
|
|
Serial.print(ftpOperation);
|
|
/* FTP_CONNECT,
|
|
* FTP_DISCONNECT,
|
|
* FTP_FREE_SPACE_CHANGE
|
|
*/
|
|
Serial.print(" ");
|
|
Serial.print(freeSpace);
|
|
Serial.print(" ");
|
|
Serial.println(totalSpace);
|
|
|
|
// freeSpace : totalSpace = x : 360
|
|
|
|
if (ftpOperation == FTP_CONNECT) Serial.println(F("CONNECTED"));
|
|
if (ftpOperation == FTP_DISCONNECT) Serial.println(F("DISCONNECTED"));
|
|
};
|
|
void _transferCallback(FtpTransferOperation ftpOperation, const char* name, unsigned int transferredSize){
|
|
Serial.print(">>>>>>>>>>>>>>> _transferCallback " );
|
|
Serial.print(ftpOperation);
|
|
/* FTP_UPLOAD_START = 0,
|
|
* FTP_UPLOAD = 1,
|
|
*
|
|
* FTP_DOWNLOAD_START = 2,
|
|
* FTP_DOWNLOAD = 3,
|
|
*
|
|
* FTP_TRANSFER_STOP = 4,
|
|
* FTP_DOWNLOAD_STOP = 4,
|
|
* FTP_UPLOAD_STOP = 4,
|
|
*
|
|
* FTP_TRANSFER_ERROR = 5,
|
|
* FTP_DOWNLOAD_ERROR = 5,
|
|
* FTP_UPLOAD_ERROR = 5
|
|
*/
|
|
Serial.print(" ");
|
|
Serial.print(name);
|
|
Serial.print(" ");
|
|
Serial.println(transferredSize);
|
|
};
|
|
|
|
|
|
void setup(void){
|
|
Serial.begin(115200);
|
|
|
|
Serial.println("Begin Ethernet");
|
|
|
|
Ethernet.init(5);
|
|
if (Ethernet.begin(macaddress)) { // Dynamic IP setup
|
|
Serial.println("DHCP OK!");
|
|
}else{
|
|
Serial.println("Failed to configure Ethernet using DHCP");
|
|
// Check for Ethernet hardware present
|
|
if (Ethernet.hardwareStatus() == EthernetNoHardware) {
|
|
Serial.println("Ethernet shield was not found. Sorry, can't run without hardware. :(");
|
|
while (true) {
|
|
delay(1); // do nothing, no point running without Ethernet hardware
|
|
}
|
|
}
|
|
if (Ethernet.linkStatus() == LinkOFF) {
|
|
Serial.println("Ethernet cable is not connected.");
|
|
}
|
|
|
|
IPAddress ip(MYIPADDR);
|
|
IPAddress dns(MYDNS);
|
|
IPAddress gw(MYGW);
|
|
IPAddress sn(MYIPMASK);
|
|
Ethernet.begin(macaddress, ip, dns, gw, sn);
|
|
Serial.println("STATIC OK!");
|
|
}
|
|
delay(5000);
|
|
|
|
|
|
Serial.print("Local IP : ");
|
|
Serial.println(Ethernet.localIP());
|
|
Serial.print("Subnet Mask : ");
|
|
Serial.println(Ethernet.subnetMask());
|
|
Serial.print("Gateway IP : ");
|
|
Serial.println(Ethernet.gatewayIP());
|
|
Serial.print("DNS Server : ");
|
|
Serial.println(Ethernet.dnsServerIP());
|
|
|
|
Serial.println("Ethernet Successfully Initialized");
|
|
|
|
/////FTP Setup, ensure FFat is started before ftp; /////////
|
|
if (FFat.begin(true)) {
|
|
Serial.println("FFat opened!");
|
|
|
|
ftpSrv.setCallback(_callback);
|
|
ftpSrv.setTransferCallback(_transferCallback);
|
|
|
|
ftpSrv.begin("user","password"); //username, password for ftp. set ports in ESP8266FtpServer.h (default 21, 50009 for PASV)
|
|
Serial.println("FTP server started!");
|
|
} else {
|
|
Serial.println("FFat opened FAIL!!!!!");
|
|
}
|
|
|
|
}
|
|
void loop(void){
|
|
ftpSrv.handleFTP(); //make sure in loop you call handleFTP()!!
|
|
// server.handleClient(); //example if running a webserver you still need to call .handleClient();
|
|
|
|
}
|