IoTManager/include/set.h

#pragma once

#include <Arduino.h>

/*******************************************************************
 **********************FIRMWARE SETTINGS****************************
 ******************************************************************/
String firmware_version = "2.3.3";
boolean mb_4_of_memory = true;
//#define OTA_enable
//#define MDNS_enable
//#define WS_enable
//#define layout_in_ram
#define UDP_enable
/*==========================SENSORS===============================*/
//#define level_enable
//#define analog_enable
//#define dallas_enable
//#define dht_enable                 //подъедает оперативку сука
//#define bmp_enable
//#define bme_enable
/*=========================LOGGING================================*/
#define logging_enable
/*==========================GEARS=================================*/
#define stepper_enable
#define servo_enable
/*=========================OTHER==================================*/
#define serial_enable
#define push_enable
/*================================================================*/
#define wifi_mqtt_reconnecting 20000
#define blink_pin 2
#define tank_level_times_to_send 10  //после скольки выстрелов делать отправку данных
#define statistics_update 1000 * 60 * 60 * 2
/*================================================================*/

//===============общие библиотеки и объекты===============================
#include <Arduino.h>
#include <ArduinoJson.h>
#include <ESPAsyncWebServer.h>
#include <FS.h>
#include <SPIFFSEditor.h>
#include <time.h>

//===============библиотеки и объекты для ESP8266=======================
#ifdef ESP8266
#include <ESP8266HTTPClient.h>
#include <ESP8266HTTPUpdateServer.h>
#include <ESP8266WiFi.h>
#include <ESP8266httpUpdate.h>
ESP8266HTTPUpdateServer httpUpdater;
#include <WiFiUdp.h>
WiFiUDP Udp;
#include <Servo.h>
Servo myServo1;
Servo myServo2;
#ifdef MDNS_enable
#include <ESP8266mDNS.h>
#endif
#endif

//===============библиотеки и объекты для ESP32===========================
#ifdef ESP32
#include <AsyncTCP.h>
#include <AsyncUDP.h>
#include <HTTPClient.h>
#include <HTTPUpdate.h>
#include <SPIFFS.h>
#include <WiFi.h>
#include <analogWrite.h>
AsyncUDP udp;
#include <ESP32Servo.h>
Servo myServo1;
Servo myServo2;
#ifdef MDNS_enable
#include <ESPmDNS.h>
#endif
#endif

#ifdef OTA_enable
#include <ArduinoOTA.h>
#endif

AsyncWebServer server(80);

#ifdef WS_enable
AsyncWebSocket ws("/ws");
#endif

AsyncEventSource events("/events");
#include <TickerScheduler.h>
#include <time.h>
enum { ROUTER_SEARCHING,
       WIFI_MQTT_CONNECTION_CHECK,
       SENSORS,
       STEPPER1,
       STEPPER2,
       LOG1,
       LOG2,
       LOG3,
       LOG4,
       LOG5,
       TIMER_COUNTDOWN,
       TIME,
       TIME_SYNC,
       STATISTICS,
       UDP,
       UDP_DB,
       TEST };
TickerScheduler ts(TEST + 1);

#include <PubSubClient.h>
WiFiClient espClient;
PubSubClient client_mqtt(espClient);

#include <StringCommand.h>
StringCommand sCmd;

#include <Bounce2.h>
#define NUM_BUTTONS 6
boolean but[NUM_BUTTONS];
Bounce *buttons = new Bounce[NUM_BUTTONS];

#ifdef level_enable
#include "GyverFilters.h"  //настраивается в GyverHacks.h - MEDIAN_FILTER_SIZE
GMedian medianFilter;
#endif

#ifdef dallas_enable
#include <DallasTemperature.h>
#include <OneWire.h>
OneWire *oneWire;
DallasTemperature sensors;
#endif

#ifdef dht_enable
#include <DHTesp.h>
DHTesp dht;
#endif

#include <Wire.h>

#ifdef bmp_enable
#include <Adafruit_BMP280.h>
Adafruit_BMP280 bmp;  // use I2C interface
Adafruit_Sensor *bmp_temp = bmp.getTemperatureSensor();
Adafruit_Sensor *bmp_pressure = bmp.getPressureSensor();
#endif

#ifdef bme_enable
#include <Adafruit_BME280.h>
Adafruit_BME280 bme;  // use I2C interface
Adafruit_Sensor *bme_temp = bme.getTemperatureSensor();
Adafruit_Sensor *bme_pressure = bme.getPressureSensor();
Adafruit_Sensor *bme_humidity = bme.getHumiditySensor();
#endif

//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(14, 12);

//===============FIRMWARE VARS========================
boolean just_load = true;
const char *hostName = "IoT Manager";
//JSON
String configSetup = "{}";
String configJson = "{}";
String optionJson = "{}";
//MQTT
String chipID = "";
String prex;
String all_widgets = "";
String scenario;
String order_loop;
//SENSORS
String analog_value_names_list;
int enter_to_analog_counter;

String level_value_name;

String dhtT_value_name;
String dhtH_value_name;

String bmp280T_value_name;
String bmp280P_value_name;

String bme280T_value_name;
String bme280P_value_name;
String bme280H_value_name;
String bme280A_value_name;

int sensors_reading_map[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
//============================0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,11,12,13,14

//LOGGING
String logging_value_names_list;
int enter_to_logging_counter;
//NTP and TIME
String current_time;
//SCENARIO
int scenario_line_status[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1};
//ERRORS
int wifi_lost_error = 0;
int mqtt_lost_error = 0;
String last_version;
//ASYNC ACTIONS
boolean upgrade_url = false;
boolean upgrade = false;
boolean mqtt_connection = false;
boolean udp_data_parse = false;
boolean mqtt_send_settings_to_udp = false;
boolean i2c_scanning = false;
//UDP
boolean udp_busy = false;
unsigned int udp_port = 4210;
#ifdef ESP8266
IPAddress udp_multicastIP(255, 255, 255, 255);
#endif
#ifdef ESP32
IPAddress udp_multicastIP(239, 255, 255, 255);
#endif
String received_ip;
String received_udp_line;
int udp_period;
//i2c
String i2c_list;