#include "Cmd.h"
#include "Global.h"

GMedian<10, int> medianFilter;
DHTesp dht;

Adafruit_BMP280 bmp;
Adafruit_Sensor *bmp_temp = bmp.getTemperatureSensor();
Adafruit_Sensor *bmp_pressure = bmp.getPressureSensor();

Adafruit_BME280 bme;
Adafruit_Sensor *bme_temp = bme.getTemperatureSensor();
Adafruit_Sensor *bme_pressure = bme.getPressureSensor();
Adafruit_Sensor *bme_humidity = bme.getHumiditySensor();

const String perceptionStr(byte value);
const String comfortStr(ComfortState value);

void bmp280T_reading();

void sensorsInit() {
    ts.add(
        SENSORS, 15000, [&](void *) {
            String buf = sensorReadingMap;
            while (buf.length()) {
                String tmp = selectToMarker(buf, ",");
                sCmd.readStr(tmp);
                buf = deleteBeforeDelimiter(buf, ",");
            }
        },
        nullptr, true);
}



//=========================================================================================================================================
//=========================================Модуль сенсоров DHT=============================================================================
#ifdef DHT_ENABLED
//dhtT t 2 dht11 Температура#DHT,#t°C Датчики any-data 1
void dhtT() {
    String value_name = sCmd.next();
    String pin = sCmd.next();
    String sensor_type = sCmd.next();
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String type = sCmd.next();
    String page_number = sCmd.next();
    //dhtT_value_name = value_name;
    if (sensor_type == "dht11") {
        dht.setup(pin.toInt(), DHTesp::DHT11);
    }
    if (sensor_type == "dht22") {
        dht.setup(pin.toInt(), DHTesp::DHT22);
    }
    createWidgetByType(widget_name, page_name, page_number, type, value_name);
    //sensors_reading_map[4] = 1;
}

void dhtT_reading() {
    float value = 0;
    static int counter;
    if (dht.getStatus() != 0 && counter < 5) {
        //MqttClient::publishStatus(dhtT_value_name, String(dht.getStatusString()));
        counter++;
    } else {
        counter = 0;
        value = dht.getTemperature();
        if (String(value) != "nan") {
            //eventGen(dhtT_value_name, "");
            //jsonWriteStr(configLiveJson, dhtT_value_name, String(value));
            //MqttClient::publishStatus(dhtT_value_name, String(value));
            //Serial.println("[I] sensor '" + dhtT_value_name + "' data: " + String(value));
        }
    }
}

//dhtH h 2 dht11 Влажность#DHT,#t°C Датчики any-data 1
void dhtH() {
    String value_name = sCmd.next();
    String pin = sCmd.next();
    String sensor_type = sCmd.next();
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String type = sCmd.next();
    String page_number = sCmd.next();
    //dhtH_value_name = value_name;
    if (sensor_type == "dht11") {
        dht.setup(pin.toInt(), DHTesp::DHT11);
    }
    if (sensor_type == "dht22") {
        dht.setup(pin.toInt(), DHTesp::DHT22);
    }
    createWidgetByType(widget_name, page_name, page_number, type, value_name);
    //sensors_reading_map[5] = 1;
}

void dhtH_reading() {
    float value = 0;
    static int counter;
    if (dht.getStatus() != 0 && counter < 5) {
        //MqttClient::publishStatus(dhtH_value_name, String(dht.getStatusString()));
        counter++;
    } else {
        counter = 0;
        value = dht.getHumidity();
        if (String(value) != "nan") {
            //eventGen(dhtH_value_name, "");
            //jsonWriteStr(configLiveJson, dhtH_value_name, String(value));
            //MqttClient::publishStatus(dhtH_value_name, String(value));
            //Serial.println("[I] sensor '" + dhtH_value_name + "' data: " + String(value));
        }
    }
}

//dhtPerception Восприятие: Датчики 4
void dhtP() {
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String page_number = sCmd.next();
    createWidgetByType(widget_name, page_name, page_number, "any-data", "dhtPerception");
    //sensors_reading_map[6] = 1;
}

void dhtP_reading() {
    byte value;
    if (dht.getStatus() != 0) {
        MqttClient::publishStatus("dhtPerception", String(dht.getStatusString()));
    } else {
        //value = dht.computePerception(jsonReadStr(configLiveJson, dhtT_value_name).toFloat(), jsonReadStr(configLiveJson, dhtH_value_name).toFloat(), false);
        String final_line = perceptionStr(value);
        jsonWriteStr(configLiveJson, "dhtPerception", final_line);
        eventGen("dhtPerception", "");
        MqttClient::publishStatus("dhtPerception", final_line);
        if (mqtt.connected()) {
            Serial.println("[I] sensor 'dhtPerception' data: " + final_line);
        }
    }
}

//dhtComfort Степень#комфорта: Датчики 3
void dhtC() {
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String page_number = sCmd.next();
    createWidgetByType(widget_name, page_name, page_number, "anydata", "dhtComfort");
    //sensors_reading_map[7] = 1;
}

void dhtC_reading() {
    ComfortState cf;
    if (dht.getStatus() != 0) {
        MqttClient::publishStatus("dhtComfort", String(dht.getStatusString()));
    } else {
        //dht.getComfortRatio(cf, jsonReadStr(configLiveJson, dhtT_value_name).toFloat(), jsonReadStr(configLiveJson, dhtH_value_name).toFloat(), false);
        String final_line = comfortStr(cf);
        jsonWriteStr(configLiveJson, "dhtComfort", final_line);
        eventGen("dhtComfort", "");
        MqttClient::publishStatus("dhtComfort", final_line);
        Serial.println("[I] sensor 'dhtComfort' send date " + final_line);
    }
}

const String perceptionStr(byte value) {
    String res;
    switch (value) {
        case 0:
            res = F("Сухой воздух");
            break;
        case 1:
            res = F("Комфортно");
            break;
        case 2:
            res = F("Уютно");
            break;
        case 3:
            res = F("Хорошо");
            break;
        case 4:
            res = F("Неудобно");
            break;
        case 5:
            res = F("Довольно неудобно");
            break;
        case 6:
            res = F("Очень неудобно");
            break;
        case 7:
            res = F("Невыносимо");
        default:
            res = F("Unknown");
            break;
    }
    return res;
}

const String comfortStr(ComfortState value) {
    String res;
    switch (value) {
        case Comfort_OK:
            res = F("Отлично");
            break;
        case Comfort_TooHot:
            res = F("Очень жарко");
            break;
        case Comfort_TooCold:
            res = F("Очень холодно");
            break;
        case Comfort_TooDry:
            res = F("Очень сухо");
            break;
        case Comfort_TooHumid:
            res = F("Очень влажно");
            break;
        case Comfort_HotAndHumid:
            res = F("Жарко и влажно");
            break;
        case Comfort_HotAndDry:
            res = F("Жарко и сухо");
            break;
        case Comfort_ColdAndHumid:
            res = F("Холодно и влажно");
            break;
        case Comfort_ColdAndDry:
            res = F("Холодно и сухо");
            break;
        default:
            res = F("Неизвестно");
            break;
    };
    return res;
}

//dhtDewpoint Точка#росы: Датчики 5
void dhtD() {
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String page_number = sCmd.next();
    createWidgetByType(widget_name, page_name, page_number, "anydata", "dhtDewpoint");
    //sensors_reading_map[8] = 1;
}

void dhtD_reading() {
    float value;
    if (dht.getStatus() != 0) {
        MqttClient::publishStatus("dhtDewpoint", String(dht.getStatusString()));
    } else {
        //value = dht.computeDewPoint(jsonReadStr(configLiveJson, dhtT_value_name).toFloat(), jsonReadStr(configLiveJson, dhtH_value_name).toFloat(), false);
        jsonWriteInt(configLiveJson, "dhtDewpoint", value);
        eventGen("dhtDewpoint", "");
        MqttClient::publishStatus("dhtDewpoint", String(value));
        Serial.println("[I] sensor 'dhtDewpoint' data: " + String(value));
    }
}
#endif
//=========================================i2c bus esp8266 scl-4 sda-5 ====================================================================
//=========================================================================================================================================
//=========================================Модуль сенсоров bmp280==========================================================================

//bmp280T temp1 0x76 Температура#bmp280 Датчики any-data 1
void bmp280T() {
    String value_name = sCmd.next();
    String address = sCmd.next();
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String type = sCmd.next();
    String page_number = sCmd.next();
    //bmp280T_value_name = value_name;
    createWidgetByType(widget_name, page_name, page_number, type, value_name);
    bmp.begin(hexStringToUint8(address));
    bmp.setSampling(Adafruit_BMP280::MODE_NORMAL,     /* Operating Mode. */
                    Adafruit_BMP280::SAMPLING_X2,     /* Temp. oversampling */
                    Adafruit_BMP280::SAMPLING_X16,    /* Pressure oversampling */
                    Adafruit_BMP280::FILTER_X16,      /* Filtering. */
                    Adafruit_BMP280::STANDBY_MS_500); /* Standby time. */
    //bmp_temp->printSensorDetails();
    //sensors_reading_map[9] = 1;
}

void bmp280T_reading() {
    float value = 0;
    sensors_event_t temp_event;
    bmp_temp->getEvent(&temp_event);
    value = temp_event.temperature;
    //jsonWriteStr(configLiveJson, bmp280T_value_name, String(value));
    //eventGen(bmp280T_value_name, "");
    //MqttClient::publishStatus(bmp280T_value_name, String(value));
    //Serial.println("[I] sensor '" + bmp280T_value_name + "' data: " + String(value));
}

//bmp280P press1 0x76 Давление#bmp280 Датчики any-data 2
void bmp280P() {
    String value_name = sCmd.next();
    String address = sCmd.next();
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String type = sCmd.next();
    String page_number = sCmd.next();
    //bmp280P_value_name = value_name;
    createWidgetByType(widget_name, page_name, page_number, type, value_name);
    bmp.begin(hexStringToUint8(address));
    bmp.setSampling(Adafruit_BMP280::MODE_NORMAL,     /* Operating Mode. */
                    Adafruit_BMP280::SAMPLING_X2,     /* Temp. oversampling */
                    Adafruit_BMP280::SAMPLING_X16,    /* Pressure oversampling */
                    Adafruit_BMP280::FILTER_X16,      /* Filtering. */
                    Adafruit_BMP280::STANDBY_MS_500); /* Standby time. */
    //bmp_temp->printSensorDetails();
    //sensors_reading_map[10] = 1;
}

void bmp280P_reading() {
    float value = 0;
    sensors_event_t pressure_event;
    bmp_pressure->getEvent(&pressure_event);
    value = pressure_event.pressure;
    value = value / 1.333224;
    //jsonWriteStr(configLiveJson, bmp280P_value_name, String(value));
    //eventGen(bmp280P_value_name, "");
    //MqttClient::publishStatus(bmp280P_value_name, String(value));
    //Serial.println("[I] sensor '" + bmp280P_value_name + "' data: " + String(value));
}

//=========================================================================================================================================
//=============================================Модуль сенсоров bme280======================================================================
//bme280T temp1 0x76 Температура#bmp280 Датчики any-data 1
void bme280T() {
    String value_name = sCmd.next();
    String address = sCmd.next();
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String type = sCmd.next();
    String page_number = sCmd.next();
    //bme280T_value_name = value_name;
    //createWidgetByType(widget_name, page_name, page_number, type, value_name);
    //bme.begin(hexStringToUint8(address));
    //sensors_reading_map[11] = 1;
}

void bme280T_reading() {
    float value = 0;
    value = bme.readTemperature();
    //jsonWriteStr(configLiveJson, bme280T_value_name, String(value));
    //eventGen(bme280T_value_name, "");
    //MqttClient::publishStatus(bme280T_value_name, String(value));
    //Serial.println("[I] sensor '" + bme280T_value_name + "' data: " + String(value));
}

//bme280P pres1 0x76 Давление#bmp280 Датчики any-data 1
void bme280P() {
    String value_name = sCmd.next();
    String address = sCmd.next();
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String type = sCmd.next();
    String page_number = sCmd.next();
    //bme280P_value_name = value_name;
    //createWidgetByType(widget_name, page_name, page_number, type, value_name);
    //bme.begin(hexStringToUint8(address));
    //sensors_reading_map[12] = 1;
}

void bme280P_reading() {
    float value = 0;
    value = bme.readPressure();
    value = value / 1.333224 / 100;
    //jsonWriteStr(configLiveJson, bme280P_value_name, String(value));
    //eventGen(bme280P_value_name, "");
    //MqttClient::publishStatus(bme280P_value_name, String(value));
    //Serial.println("[I] sensor '" + bme280P_value_name + "' data: " + String(value));
}

//bme280H hum1 0x76 Влажность#bmp280 Датчики any-data 1
void bme280H() {
    String value_name = sCmd.next();
    String address = sCmd.next();
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String type = sCmd.next();
    String page_number = sCmd.next();
    //bme280H_value_name = value_name;
    createWidgetByType(widget_name, page_name, page_number, type, value_name);
    bme.begin(hexStringToUint8(address));
    //sensors_reading_map[13] = 1;
}

void bme280H_reading() {
    float value = 0;
    value = bme.readHumidity();
    //jsonWriteStr(configLiveJson, bme280H_value_name, String(value));
    //eventGen(bme280H_value_name, "");
    //MqttClient::publishStatus(bme280H_value_name, String(value));
    //Serial.println("[I] sensor '" + bme280H_value_name + "' data: " + String(value));
}

//bme280A altit1 0x76 Высота#bmp280 Датчики any-data 1
void bme280A() {
    String value_name = sCmd.next();
    String address = sCmd.next();
    String widget_name = sCmd.next();
    String page_name = sCmd.next();
    String type = sCmd.next();
    String page_number = sCmd.next();
    //bme280A_value_name = value_name;
    createWidgetByType(widget_name, page_name, page_number, type, value_name);
    bme.begin(hexStringToUint8(address));
    //sensors_reading_map[14] = 1;
}

void bme280A_reading() {
    float value = bme.readAltitude(1013.25);
    //jsonWriteStr(configLiveJson, bme280A_value_name, String(value, 2));

    //eventGen(bme280A_value_name, "");

    //MqttClient::publishStatus(bme280A_value_name, String(value));

    //Serial.println("[I] sensor '" + bme280A_value_name + "' data: " + String(value));
}