Модуль FTP

lib/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino

@@ -0,0 +1,104 @@
+/*
+ * FtpServer Wio Terminal with SdFat library
+ * and with callbacks to the main actions of FTP server
+ *
+ * AUTHOR:  Renzo Mischianti
+ *
+ * https://www.mischianti.org/category/my-libraries/simple-ftp-server/
+ *
+ */
+
+#include "SdFat.h"
+
+#include <rpcWiFi.h>
+
+#include <FtpServer.h>
+
+//	#define DEFAULT_FTP_SERVER_NETWORK_TYPE_SAMD NETWORK_SEEED_RTL8720DN
+//	#define DEFAULT_STORAGE_TYPE_SAMD STORAGE_SDFAT2
+
+#define SD_CONFIG SdSpiConfig(SDCARD_SS_PIN, 2)
+SdFs sd;
+
+FtpServer ftpSrv;
+
+const char *ssid = "<YOUR-SSID>";
+const char *password = "<YOUR-PASSWD>";
+
+void setup()
+{
+    Serial.begin(115200);
+    delay(1000);
+
+    pinMode(5, OUTPUT);
+    digitalWrite(5, HIGH);
+
+    // Initialize the SD.
+    if (!sd.begin(SD_CONFIG)) {
+      sd.initErrorHalt(&Serial);
+    }
+    FsFile dir;
+    FsFile file;
+
+    // Open root directory
+    if (!dir.open("/")){
+      Serial.println("dir.open failed");
+    }
+
+    // We start by connecting to a WiFi network
+
+    Serial.println();
+    Serial.println();
+    Serial.print("Connecting to ");
+    Serial.print(ssid);
+
+    WiFi.mode(WIFI_STA);
+
+
+    WiFi.begin(ssid, password);
+
+    while (WiFi.status() != WL_CONNECTED)
+    {
+        Serial.print("Connecting to ");
+        Serial.println(ssid);
+        WiFi.begin(ssid, password);
+        Serial.print(".");
+        delay(500);
+    }
+
+    Serial.println("");
+    Serial.println("WiFi connected");
+    Serial.println("IP address: ");
+    Serial.println(WiFi.localIP());
+    delay(1000);
+
+    Serial.print("Starting SD.");
+
+    Serial.println("finish!");
+
+    while (file.openNext(&dir, O_RDONLY)) {
+      file.printFileSize(&Serial);
+      Serial.write(' ');
+      file.printModifyDateTime(&Serial);
+      Serial.write(' ');
+      file.printName(&Serial);
+      if (file.isDir()) {
+        // Indicate a directory.
+        Serial.write('/');
+      }
+      Serial.println();
+      file.close();
+    }
+    if (dir.getError()) {
+      Serial.println("openNext failed");
+    } else {
+      Serial.println("Done!");
+    }
+
+
+    ftpSrv.begin("esp8266","esp8266");    //username, password for ftp.
+  }
+
+  void loop(void) {
+  	  ftpSrv.handleFTP();        //make sure in loop you call handleFTP()!!
+  }