Модуль FTP

lib/SimpleFTPServer/examples/ESP32_FFAT_enc28j60/ESP32_FFAT_enc28j60.ino

@@ -0,0 +1,130 @@
+/*
+ * FtpServer esp32 with FFat and EthernetENC (or UIPEthernet)
+ *
+ * AUTHOR:  Renzo Mischianti
+ *
+ * https://www.mischianti.org/2020/02/08/ftp-server-on-esp8266-and-esp32
+ *
+ */
+
+#include "Arduino.h"
+#include <SPI.h>
+#include <EthernetENC.h>
+
+#include "FS.h"
+#include "FFat.h"
+
+#include <SimpleFTPServer.h>
+
+#define MACADDRESS 0x00,0x01,0x02,0x03,0x04,0x05
+#define MYIPADDR 192,168,1,28
+#define MYIPMASK 255,255,255,0
+#define MYDNS 192,168,1,1
+#define MYGW 192,168,1,1
+
+uint8_t macaddress[6] = {MACADDRESS};
+
+FtpServer ftpSrv;   //set #define FTP_DEBUG in ESP8266FtpServer.h to see ftp verbose on serial
+
+void _callback(FtpOperation ftpOperation, unsigned int freeSpace, unsigned int totalSpace){
+	Serial.print(">>>>>>>>>>>>>>> _callback " );
+	Serial.print(ftpOperation);
+	/* FTP_CONNECT,
+	 * FTP_DISCONNECT,
+	 * FTP_FREE_SPACE_CHANGE
+	 */
+	Serial.print(" ");
+	Serial.print(freeSpace);
+	Serial.print(" ");
+	Serial.println(totalSpace);
+
+	// freeSpace : totalSpace = x : 360
+
+	if (ftpOperation == FTP_CONNECT) Serial.println(F("CONNECTED"));
+	if (ftpOperation == FTP_DISCONNECT) Serial.println(F("DISCONNECTED"));
+};
+void _transferCallback(FtpTransferOperation ftpOperation, const char* name, unsigned int transferredSize){
+	Serial.print(">>>>>>>>>>>>>>> _transferCallback " );
+	Serial.print(ftpOperation);
+	/* FTP_UPLOAD_START = 0,
+	 * FTP_UPLOAD = 1,
+	 *
+	 * FTP_DOWNLOAD_START = 2,
+	 * FTP_DOWNLOAD = 3,
+	 *
+	 * FTP_TRANSFER_STOP = 4,
+	 * FTP_DOWNLOAD_STOP = 4,
+	 * FTP_UPLOAD_STOP = 4,
+	 *
+	 * FTP_TRANSFER_ERROR = 5,
+	 * FTP_DOWNLOAD_ERROR = 5,
+	 * FTP_UPLOAD_ERROR = 5
+	 */
+	Serial.print(" ");
+	Serial.print(name);
+	Serial.print(" ");
+	Serial.println(transferredSize);
+};
+
+
+void setup(void){
+  Serial.begin(115200);
+
+  Serial.println("Begin Ethernet");
+
+  Ethernet.init(5);
+  if (Ethernet.begin(macaddress)) { // Dynamic IP setup
+      Serial.println("DHCP OK!");
+  }else{
+      Serial.println("Failed to configure Ethernet using DHCP");
+      // Check for Ethernet hardware present
+      if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+        Serial.println("Ethernet shield was not found.  Sorry, can't run without hardware. :(");
+        while (true) {
+          delay(1); // do nothing, no point running without Ethernet hardware
+        }
+      }
+      if (Ethernet.linkStatus() == LinkOFF) {
+        Serial.println("Ethernet cable is not connected.");
+      }
+
+  	  IPAddress ip(MYIPADDR);
+  	  IPAddress dns(MYDNS);
+  	  IPAddress gw(MYGW);
+  	  IPAddress sn(MYIPMASK);
+  	  Ethernet.begin(macaddress, ip, dns, gw, sn);
+		  Serial.println("STATIC OK!");
+  }
+  delay(5000);
+
+
+  Serial.print("Local IP : ");
+  Serial.println(Ethernet.localIP());
+  Serial.print("Subnet Mask : ");
+  Serial.println(Ethernet.subnetMask());
+  Serial.print("Gateway IP : ");
+  Serial.println(Ethernet.gatewayIP());
+  Serial.print("DNS Server : ");
+  Serial.println(Ethernet.dnsServerIP());
+
+ Serial.println("Ethernet Successfully Initialized");
+
+  /////FTP Setup, ensure FFat is started before ftp;  /////////
+  if (FFat.begin(true)) {
+      Serial.println("FFat opened!");
+
+      ftpSrv.setCallback(_callback);
+      ftpSrv.setTransferCallback(_transferCallback);
+
+      ftpSrv.begin("user","password");    //username, password for ftp.  set ports in ESP8266FtpServer.h  (default 21, 50009 for PASV)
+      Serial.println("FTP server started!");
+  } else {
+	  Serial.println("FFat opened FAIL!!!!!");
+  }
+
+}
+void loop(void){
+  ftpSrv.handleFTP();        //make sure in loop you call handleFTP()!!
+ // server.handleClient();   //example if running a webserver you still need to call .handleClient();
+
+}