gatewayTransportSend

lib/MySensors/hal/crypto/AVR/drivers/AES/aes.h

@@ -0,0 +1,111 @@
+/*
+* The MySensors Arduino library handles the wireless radio link and protocol
+* between your home built sensors/actuators and HA controller of choice.
+* The sensors forms a self healing radio network with optional repeaters. Each
+* repeater and gateway builds a routing tables in EEPROM which keeps track of the
+* network topology allowing messages to be routed to nodes.
+*
+* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+* Copyright (C) 2013-2019 Sensnology AB
+* Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
+*
+* Documentation: http://www.mysensors.org
+* Support Forum: http://forum.mysensors.org
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* version 2 as published by the Free Software Foundation.
+*
+* AES implementation: https://github.com/kokke/tiny-AES-c
+*/
+
+#ifndef _AES_H_
+#define _AES_H_
+
+// #define the macros below to 1/0 to enable/disable the mode of operation.
+//
+// CBC enables AES encryption in CBC-mode of operation.
+// CTR enables encryption in counter-mode.
+// ECB enables the basic ECB 16-byte block algorithm. All can be enabled simultaneously.
+
+// The #ifndef-guard allows it to be configured before #include'ing or at compile time.
+#ifndef CBC
+#define CBC 1
+#endif
+
+#ifndef ECB
+#define ECB 0
+#endif
+
+#ifndef CTR
+#define CTR 0
+#endif
+
+
+#define AES128 1
+//#define AES192 1
+//#define AES256 1
+
+#define AES_BLOCKLEN 16 //Block length in bytes AES is 128b block only
+
+#if defined(AES256) && (AES256 == 1)
+#define AES_KEYLEN 32
+#define AES_keyExpSize 240
+#elif defined(AES192) && (AES192 == 1)
+#define AES_KEYLEN 24
+#define AES_keyExpSize 208
+#else
+#define AES_KEYLEN 16   // Key length in bytes
+#define AES_keyExpSize 176
+#endif
+
+/**
+ * @brief AES state structure
+ */
+struct AES_ctx {
+	uint8_t RoundKey[AES_keyExpSize];	//!< RoundKey
+#if (defined(CBC) && (CBC == 1)) || (defined(CTR) && (CTR == 1))
+	uint8_t Iv[AES_BLOCKLEN];	//!< Iv
+#endif
+};
+
+void AES_init_ctx(struct AES_ctx* ctx, const uint8_t* key);
+#if (defined(CBC) && (CBC == 1)) || (defined(CTR) && (CTR == 1))
+void AES_init_ctx_iv(struct AES_ctx* ctx, const uint8_t* key, const uint8_t* iv);
+void AES_ctx_set_iv(struct AES_ctx* ctx, const uint8_t* iv);
+#endif
+
+#if defined(ECB) && (ECB == 1)
+// buffer size is exactly AES_BLOCKLEN bytes;
+// you need only AES_init_ctx as IV is not used in ECB
+// NB: ECB is considered insecure for most uses
+void AES_ECB_encrypt(const struct AES_ctx* ctx, uint8_t* buf);
+void AES_ECB_decrypt(const struct AES_ctx* ctx, uint8_t* buf);
+
+#endif // #if defined(ECB) && (ECB == !)
+
+
+#if defined(CBC) && (CBC == 1)
+// buffer size MUST be mutile of AES_BLOCKLEN;
+// Suggest https://en.wikipedia.org/wiki/Padding_(cryptography)#PKCS7 for padding scheme
+// NOTES: you need to set IV in ctx via AES_init_ctx_iv() or AES_ctx_set_iv()
+//        no IV should ever be reused with the same key
+void AES_CBC_encrypt_buffer(struct AES_ctx* ctx, uint8_t* buf, uint32_t length);
+void AES_CBC_decrypt_buffer(struct AES_ctx* ctx, uint8_t* buf, uint32_t length);
+
+#endif // #if defined(CBC) && (CBC == 1)
+
+
+#if defined(CTR) && (CTR == 1)
+
+// Same function for encrypting as for decrypting.
+// IV is incremented for every block, and used after encryption as XOR-compliment for output
+// Suggesting https://en.wikipedia.org/wiki/Padding_(cryptography)#PKCS7 for padding scheme
+// NOTES: you need to set IV in ctx with AES_init_ctx_iv() or AES_ctx_set_iv()
+//        no IV should ever be reused with the same key
+void AES_CTR_xcrypt_buffer(struct AES_ctx* ctx, uint8_t* buf, uint32_t length);
+
+#endif // #if defined(CTR) && (CTR == 1)
+
+
+#endif //_AES_H_