gatewayTransportSend

2026-03-30 11:59:12 +03:00 · 2022-12-01 02:10:06 +01:00
parent 2c61580157
commit cb50965c3b
293 changed files with 67232 additions and 3 deletions
--- a/lib/MySensors/examples/MotionSensorRS485/MotionSensorRS485.ino
+++ b/lib/MySensors/examples/MotionSensorRS485/MotionSensorRS485.ino
@@ -0,0 +1,98 @@
+/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
+ * between your home built sensors/actuators and HA controller of choice.
+ * The sensors forms a self healing radio network with optional repeaters. Each
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
+ * network topology allowing messages to be routed to nodes.
+ *
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * Copyright (C) 2013-2019 Sensnology AB
+ * Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
+ *
+ * Documentation: http://www.mysensors.org
+ * Support Forum: http://forum.mysensors.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ *******************************
+ *
+ * REVISION HISTORY
+ * Version 1.0 - Henrik Ekblad
+ *
+ * DESCRIPTION
+ * This is an example of sensors using RS485 as transport layer
+ *
+ * Motion Sensor example using HC-SR501
+ * http://www.mysensors.org/build/motion
+ *
+ * If your Arduino board has additional serial ports
+ * you can use to connect the RS485 module.
+ * Otherwise, the transport uses AltSoftSerial to handle two serial
+ * links on one Arduino. Use the following pins for RS485 link
+ *
+ *  Board          Transmit  Receive   PWM Unusable
+ * -----          --------  -------   ------------
+ * Teensy 3.0 & 3.1  21        20         22
+ * Teensy 2.0         9        10       (none)
+ * Teensy++ 2.0      25         4       26, 27
+ * Arduino Uno        9         8         10
+ * Arduino Leonardo   5        13       (none)
+ * Arduino Mega      46        48       44, 45
+ * Wiring-S           5         6          4
+ * Sanguino          13        14         12 *
+ *
+ */
+
+// Enable debug prints to serial monitor
+#define MY_DEBUG
+
+// Enable RS485 transport layer
+#define MY_RS485
+
+// Define this to enables DE-pin management on defined pin
+#define MY_RS485_DE_PIN 2
+
+// Set RS485 baud rate to use
+#define MY_RS485_BAUD_RATE 9600
+
+// Enable this if RS485 is connected to a hardware serial port
+//#define MY_RS485_HWSERIAL Serial1
+
+#include <MySensors.h>
+
+uint32_t SLEEP_TIME = 120000; // Sleep time between reports (in milliseconds)
+#define DIGITAL_INPUT_SENSOR 3   // The digital input you attached your motion sensor.  (Only 2 and 3 generates interrupt!)
+#define CHILD_ID 1   // Id of the sensor child
+
+// Initialize motion message
+MyMessage msg(CHILD_ID, V_TRIPPED);
+
+void setup()
+{
+	pinMode(DIGITAL_INPUT_SENSOR, INPUT);      // sets the motion sensor digital pin as input
+}
+
+void presentation()
+{
+	// Send the sketch version information to the gateway and Controller
+	sendSketchInfo("Motion Sensor", "1.0");
+
+	// Register all sensors to gw (they will be created as child devices)
+	present(CHILD_ID, S_MOTION);
+}
+
+void loop()
+{
+	// Read digital motion value
+	bool tripped = digitalRead(DIGITAL_INPUT_SENSOR) == HIGH;
+
+	Serial.println(tripped);
+	send(msg.set(tripped?"1":"0"));  // Send tripped value to gw
+
+	// Sleep until interrupt comes in on motion sensor. Send update every two minute.
+	sleep(digitalPinToInterrupt(DIGITAL_INPUT_SENSOR), CHANGE, SLEEP_TIME);
+}
+
+