gatewayTransportSend

2026-03-30 03:49:13 +03:00 · 2022-12-01 02:10:06 +01:00
parent 2c61580157
commit cb50965c3b
293 changed files with 67232 additions and 3 deletions
--- a/lib/MySensors/examples/GatewayESP32OTA/GatewayESP32OTA.ino
+++ b/lib/MySensors/examples/GatewayESP32OTA/GatewayESP32OTA.ino
@@ -0,0 +1,120 @@
+/**
+   The MySensors Arduino library handles the wireless radio link and protocol
+   between your home built sensors/actuators and HA controller of choice.
+   The sensors forms a self healing radio network with optional repeaters. Each
+   repeater and gateway builds a routing tables in EEPROM which keeps track of the
+   network topology allowing messages to be routed to nodes.
+
+   Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+   Copyright (C) 2013-2019 Sensnology AB
+   Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
+
+   Documentation: http://www.mysensors.org
+   Support Forum: http://forum.mysensors.org
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   version 2 as published by the Free Software Foundation.
+
+ *******************************
+
+   REVISION HISTORY
+   Version 1.0 - tekka
+   Contribution by Berk
+
+   DESCRIPTION
+   The ESP32 gateway sends data received from sensors to the WiFi link.
+   The gateway also accepts input on ethernet interface, which is then sent out to the radio network.
+
+   Make sure to fill in your ssid and WiFi password below.
+*/
+
+// Enable debug prints to serial monitor
+#define MY_DEBUG
+
+// Enables and select radio type (if attached)
+#define MY_RADIO_RF24
+//#define MY_RADIO_RFM69
+//#define MY_RADIO_RFM95
+
+#define MY_GATEWAY_ESP32
+
+#define MY_WIFI_SSID "MySSID"
+#define MY_WIFI_PASSWORD "MyVerySecretPassword"
+
+// Set the hostname for the WiFi Client. This is the hostname
+// passed to the DHCP server if not static.
+#define MY_HOSTNAME "ESP32_GW"
+
+// Enable MY_IP_ADDRESS here if you want a static ip address (no DHCP)
+//#define MY_IP_ADDRESS 192,168,1,100
+
+// If using static ip you can define Gateway and Subnet address as well
+//#define MY_IP_GATEWAY_ADDRESS 192,168,1,1
+//#define MY_IP_SUBNET_ADDRESS 255,255,255,0
+
+// The port to keep open on node server mode
+#define MY_PORT 5003
+
+// How many clients should be able to connect to this gateway (default 1)
+#define MY_GATEWAY_MAX_CLIENTS 2// Set blinking period
+
+
+// Advanced Gateway Options
+//#define MY_DEFAULT_LED_BLINK_PERIOD 50
+
+// Flash leds on rx/tx/err
+// Led pins used if blinking feature is enabled above
+//#define MY_DEFAULT_ERR_LED_PIN 32  // Transfer data error led pin
+//#define MY_DEFAULT_RX_LED_PIN  25  // Receive Data led pin
+//#define MY_DEFAULT_TX_LED_PIN  27  // Transmit Data led pin
+
+//#define MY_WITH_LEDS_BLINKING_INVERSE  // At the time of Error, Receive, Transmit the pin is at a high level
+
+#include <ArduinoOTA.h>
+#include <MySensors.h>
+
+void setup()
+{
+	// Setup locally attached sensors
+	ArduinoOTA.onStart([]() {
+		Serial.println("Start updating");
+	});
+	ArduinoOTA.onEnd([]() {
+		Serial.println("\nEnd updating");
+	});
+	ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
+		Serial.printf("OTA Progress: %u%%\r", (progress / (total / 100)));
+	});
+	ArduinoOTA.onError([](ota_error_t error) {
+		Serial.printf("Error[%u]: ", error);
+		if (error == OTA_AUTH_ERROR) {
+			Serial.println("Auth Failed");
+		} else if (error == OTA_BEGIN_ERROR) {
+			Serial.println("Begin Failed");
+		} else if (error == OTA_CONNECT_ERROR) {
+			Serial.println("Connect Failed");
+		} else if (error == OTA_RECEIVE_ERROR) {
+			Serial.println("Receive Failed");
+		} else if (error == OTA_END_ERROR) {
+			Serial.println("End Failed");
+		}
+	});
+	ArduinoOTA.begin();
+
+
+
+	// Setup locally attached sensors
+}
+
+void presentation()
+{
+	// Present locally attached sensors here
+}
+
+void loop()
+{
+	// Send locally attached sensors data here
+
+	ArduinoOTA.handle();
+}