добавление mysensors в процессе не рабочая версия

lib/MySensors/examples/PingPongSensor/PingPongSensor.ino

@@ -0,0 +1,127 @@
+/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
+ * between your home built sensors/actuators and HA controller of choice.
+ * The sensors forms a self healing radio network with optional repeaters. Each
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
+ * network topology allowing messages to be routed to nodes.
+ *
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * Copyright (C) 2013-2019 Sensnology AB
+ * Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
+ *
+ * Documentation: http://www.mysensors.org
+ * Support Forum: http://forum.mysensors.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ *******************************
+ *
+ *  This is a simple sketch used to demonstrate and test node-to-node MySensors communication.
+ *  To use this sketch, assemble MySensors nodes - they need nothing more than a radio
+ *  1.  Flash each node with the same sketch, open the console and type either 0 or 1 to the respective nodes to set their ID
+ *  2.  You only need to set the node id once, and restart the nodes
+ *  3.  To being a ping-pong test, simply type T in the console for one of the nodes.
+ *
+ *  2015-05-25 Bruce Lacey v1.0
+ */
+
+// Enable debug prints to serial monitor
+#define MY_DEBUG
+
+// Enable and select radio type attached
+#define MY_RADIO_RF24
+//#define MY_RADIO_NRF5_ESB
+//#define MY_RADIO_RFM69
+//#define MY_RADIO_RFM95
+
+#include <MySensors.h>
+#include "MYSLog.h"
+
+#define VSN "v1.0"
+
+// Define two generic nodes with a single child
+#define YING 200
+#define YANG 201
+#define CHILD 1
+
+MyMessage mPing(CHILD, V_VAR1);   //Ping message
+MyMessage mPong(CHILD, V_VAR2);   //Pong message
+
+void setup()
+{
+}
+
+void presentation()
+{
+	present(CHILD, S_CUSTOM);  //
+
+	sendSketchInfo( nodeTypeAsCharRepresentation( getNodeId() ), VSN );
+	LOG(F("\n%sReady.\n"), nodeTypeAsCharRepresentation(getNodeId()));
+}
+
+void loop()
+{
+
+	// Interactive command and control
+	// Entering a number from 0 or 1 will write the node 200 (YING) or 201 (YANG) to EEPROM
+	// Entering T on either node will initiate a ping-pong test.
+	if (Serial.available()) {
+		byte inChar = Serial.read();
+		uint8_t node = getNodeId();
+
+		// Manual Test Mode
+		if (inChar == 'T' || inChar == 't') {
+			LOG(F("T received - starting test...\n"));
+			MyMessage msg = mPong;
+			msg.sender = (node == YING ? YANG : YING);
+			sendPingOrPongResponse( msg );
+		} else if (inChar == '0' or inChar == '1') {
+			byte nodeID = 200 + (inChar - '0');
+			setNodeId(nodeID);
+		} else {
+			LOG("Invalid input\n");
+		}
+	}
+}
+
+void receive(const MyMessage &message)
+{
+
+	LOG(F("Received %s from %s\n"), msgTypeAsCharRepresentation((mysensors_data_t)message.getType()),
+	    nodeTypeAsCharRepresentation(message.sender));
+
+	delay(250);
+	sendPingOrPongResponse( message );
+}
+
+void sendPingOrPongResponse( MyMessage msg )
+{
+
+	MyMessage response = (msg.getType() == V_VAR1 ? mPong : mPing);
+
+	LOG(F("Sending %s to %s\n"), msgTypeAsCharRepresentation( (mysensors_data_t)response.getType() ),
+	    nodeTypeAsCharRepresentation(msg.sender));
+
+	// Set payload to current time in millis to ensure each message is unique
+	response.set( (uint32_t)millis() );
+	response.setDestination(msg.sender);
+	send(response);
+}
+
+void setNodeId(byte nodeID)
+{
+	LOG(F("Setting node id to: %i.\n***Please restart the node for changes to take effect.\n"), nodeID);
+	hwWriteConfig(EEPROM_NODE_ID_ADDRESS, (byte)nodeID);
+}
+
+const char * msgTypeAsCharRepresentation( mysensors_data_t mType )
+{
+	return mType == V_VAR1 ? "Ping" : "Pong";
+}
+
+const char * nodeTypeAsCharRepresentation( uint8_t node )
+{
+	return node == YING ? "Ying Node" : "Yang Node";
+}