добавление mysensors в процессе не рабочая версия

2026-03-30 03:49:13 +03:00 · 2022-11-30 23:31:27 +01:00
parent 3e95049ce9
commit 9436af94df
304 changed files with 67751 additions and 29 deletions
--- a/lib/MySensors/core/MyLeds.cpp
+++ b/lib/MySensors/core/MyLeds.cpp
@@ -0,0 +1,119 @@
+/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
+ * between your home built sensors/actuators and HA controller of choice.
+ * The sensors forms a self healing radio network with optional repeaters. Each
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
+ * network topology allowing messages to be routed to nodes.
+ *
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * Copyright (C) 2013-2019 Sensnology AB
+ * Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
+ *
+ * Documentation: http://www.mysensors.org
+ * Support Forum: http://forum.mysensors.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include "MyLeds.h"
+
+#define LED_ON_OFF_RATIO        (4)       // Power of 2 please
+#define LED_PROCESS_INTERVAL_MS (MY_DEFAULT_LED_BLINK_PERIOD/LED_ON_OFF_RATIO)
+
+// these variables don't need to be volatile, since we are not using interrupts
+static uint8_t countRx;
+static uint8_t countTx;
+static uint8_t countErr;
+static unsigned long prevTime;
+
+inline void ledsInit()
+{
+	// initialize counters
+	countRx = 0;
+	countTx = 0;
+	countErr = 0;
+
+	// Setup led pins
+#if defined(MY_DEFAULT_RX_LED_PIN)
+	hwPinMode(MY_DEFAULT_RX_LED_PIN,  OUTPUT);
+#endif
+#if defined(MY_DEFAULT_TX_LED_PIN)
+	hwPinMode(MY_DEFAULT_TX_LED_PIN,  OUTPUT);
+#endif
+#if defined(MY_DEFAULT_ERR_LED_PIN)
+	hwPinMode(MY_DEFAULT_ERR_LED_PIN, OUTPUT);
+#endif
+	prevTime = hwMillis() -
+	           LED_PROCESS_INTERVAL_MS;     // Subtract some, to make sure leds gets updated on first run.
+	ledsProcess();
+}
+
+void ledsProcess()
+{
+	// Just return if it is not the time...
+	if ((hwMillis() - prevTime) < LED_PROCESS_INTERVAL_MS) {
+		return;
+	}
+	prevTime = hwMillis();
+
+#if defined(MY_DEFAULT_RX_LED_PIN) || defined(MY_DEFAULT_TX_LED_PIN) || defined(MY_DEFAULT_ERR_LED_PIN)
+	uint8_t state;
+#endif
+
+	// For an On/Off ratio of 4, the pattern repeated will be [on, on, on, off]
+	// until the counter becomes 0.
+#if defined(MY_DEFAULT_RX_LED_PIN)
+	if (countRx) {
+		--countRx;
+	}
+	state = (countRx & (LED_ON_OFF_RATIO-1)) ? LED_ON : LED_OFF;
+	hwDigitalWrite(MY_DEFAULT_RX_LED_PIN, state);
+#endif
+
+#if defined(MY_DEFAULT_TX_LED_PIN)
+	if (countTx) {
+		--countTx;
+	}
+	state = (countTx & (LED_ON_OFF_RATIO-1)) ? LED_ON : LED_OFF;
+	hwDigitalWrite(MY_DEFAULT_TX_LED_PIN, state);
+#endif
+
+#if defined(MY_DEFAULT_ERR_LED_PIN)
+	if (countErr) {
+		--countErr;
+	}
+	state = (countErr & (LED_ON_OFF_RATIO-1)) ? LED_ON : LED_OFF;
+	hwDigitalWrite(MY_DEFAULT_ERR_LED_PIN, state);
+#endif
+}
+
+void ledsBlinkRx(uint8_t cnt)
+{
+	if (!countRx) {
+		countRx = cnt*LED_ON_OFF_RATIO;
+	}
+	ledsProcess();
+}
+
+void ledsBlinkTx(uint8_t cnt)
+{
+	if(!countTx) {
+		countTx = cnt*LED_ON_OFF_RATIO;
+	}
+	ledsProcess();
+}
+
+void ledsBlinkErr(uint8_t cnt)
+{
+	if(!countErr) {
+		countErr = cnt*LED_ON_OFF_RATIO;
+	}
+	ledsProcess();
+}
+
+bool ledsBlinking()
+{
+	return countRx || countTx || countErr;
+}