Добавляем модуль приема и передачи по радио 433Mhz

data_svelte/items.json

@@ -96,22 +96,7 @@
         "num": 6
     },
     {
-        "name": "7. Телеграм-Бот",
+        "name": "7. Таймер",
-        "type": "Writing",
-        "subtype": "Telegram",
-        "id": "tg",
-        "widget": "",
-        "page": "",
-        "descr": "",
-        "int": 10,
-        "token": "",
-        "autos": 1,
-        "receiveMsg": 0,
-        "chatID": "",
-        "num": 7
-    },
-    {
-        "name": "8. Таймер",
         "type": "Writing",
         "subtype": "Timer",
         "id": "timer",
@@ -123,30 +108,13 @@
         "ticker": 0,
         "repeat": 0,
         "needSave": 0,
-        "num": 8
+        "num": 7
     },
     {
         "header": "Сенсоры"
     },
     {
-        "name": "9. Датчик напряжения ADS1115",
+        "name": "8. Cенсор температуры AHT20",
-        "type": "Reading",
-        "subtype": "Ads1115",
-        "id": "Ads3",
-        "widget": "anydataVlt",
-        "page": "Сенсоры",
-        "descr": "ADS_3",
-        "pin": "0",
-        "mode": "volt",
-        "gain": "3/4x",
-        "plus": 0,
-        "multiply": 1,
-        "round": 2,
-        "int": 10,
-        "num": 9
-    },
-    {
-        "name": "10. Cенсор температуры AHT20",
         "type": "Reading",
         "subtype": "Aht20t",
         "id": "Temp20",
@@ -156,10 +124,10 @@
         "int": 15,
         "addr": "0x38",
         "round": 1,
-        "num": 10
+        "num": 8
     },
     {
-        "name": "11. Cенсор влажности AHT20",
+        "name": "9. Cенсор влажности AHT20",
         "type": "Reading",
         "subtype": "Aht20h",
         "id": "Hum20",
@@ -169,10 +137,10 @@
         "int": 15,
         "addr": "0x38",
         "round": 1,
-        "num": 11
+        "num": 9
     },
     {
-        "name": "12. Аналоговый сенсор",
+        "name": "10. Аналоговый сенсор",
         "type": "Reading",
         "subtype": "AnalogAdc",
         "id": "t",
@@ -186,10 +154,10 @@
         "pin": 0,
         "int": 15,
         "avgSteps": 1,
-        "num": 12
+        "num": 10
     },
     {
-        "name": "13. Cенсор температуры Bme280",
+        "name": "11. Cенсор температуры Bme280",
         "type": "Reading",
         "subtype": "Bme280t",
         "id": "tmp3",
@@ -199,10 +167,10 @@
         "int": 15,
         "addr": "0x77",
         "round": 1,
-        "num": 13
+        "num": 11
     },
     {
-        "name": "14. Cенсор давления Bme280",
+        "name": "12. Cенсор давления Bme280",
         "type": "Reading",
         "subtype": "Bme280p",
         "id": "Press3",
@@ -212,10 +180,10 @@
         "int": 15,
         "addr": "0x77",
         "round": 1,
-        "num": 14
+        "num": 12
     },
     {
-        "name": "15. Cенсор влажности Bme280",
+        "name": "13. Cенсор влажности Bme280",
         "type": "Reading",
         "subtype": "Bme280h",
         "id": "Hum3",
@@ -225,10 +193,10 @@
         "int": 15,
         "addr": "0x77",
         "round": 1,
-        "num": 15
+        "num": 13
     },
     {
-        "name": "16. Cенсор температуры Bmp280",
+        "name": "14. Cенсор температуры Bmp280",
         "type": "Reading",
         "subtype": "Bmp280t",
         "id": "tmp3",
@@ -238,10 +206,10 @@
         "int": 15,
         "addr": "0x77",
         "round": 1,
-        "num": 16
+        "num": 14
     },
     {
-        "name": "17. Cенсор давления Bmp280",
+        "name": "15. Cенсор давления Bmp280",
         "type": "Reading",
         "subtype": "Bmp280p",
         "id": "Press3",
@@ -251,10 +219,10 @@
         "int": 15,
         "addr": "0x77",
         "round": 1,
-        "num": 17
+        "num": 15
     },
     {
-        "name": "18. Cенсор температуры dht11",
+        "name": "16. Cенсор температуры dht11",
         "type": "Reading",
         "subtype": "Dht1122t",
         "id": "tmp3",
@@ -264,10 +232,10 @@
         "int": 15,
         "pin": 0,
         "senstype": "dht11",
-        "num": 18
+        "num": 16
     },
     {
-        "name": "19. Cенсор влажности dht11",
+        "name": "17. Cенсор влажности dht11",
         "type": "Reading",
         "subtype": "Dht1122h",
         "id": "Hum3",
@@ -277,10 +245,10 @@
         "int": 15,
         "pin": 0,
         "senstype": "dht11",
-        "num": 19
+        "num": 17
     },
     {
-        "name": "20. Cенсор температуры ds18b20",
+        "name": "18. Cенсор температуры ds18b20",
         "type": "Reading",
         "subtype": "Ds18b20",
         "id": "dstmp",
@@ -292,40 +260,10 @@
         "index": 0,
         "addr": "",
         "round": 1,
-        "num": 20
+        "num": 18
     },
     {
-        "name": "21. Датчик тока",
+        "name": "19. Cенсор температуры GY21",
-        "type": "Reading",
-        "subtype": "I",
-        "id": "current",
-        "widget": "anydataAmp",
-        "page": "Сенсоры",
-        "descr": "Датчик тока",
-        "int": 10,
-        "pin_I": 34,
-        "calib_I": 111.1,
-        "plus": 0,
-        "multiply": 1,
-        "num": 21
-    },
-    {
-        "name": "22. Датчик напряжения",
-        "type": "Reading",
-        "subtype": "U",
-        "id": "voltage",
-        "widget": "anydataVlt",
-        "page": "Сенсоры",
-        "descr": "Датчик напряжения",
-        "int": 10,
-        "pin_U": 35,
-        "calib_U": 223.1,
-        "plus": 0,
-        "multiply": 1,
-        "num": 22
-    },
-    {
-        "name": "23. Cенсор температуры GY21",
         "type": "Reading",
         "subtype": "GY21t",
         "id": "tmp4",
@@ -334,10 +272,10 @@
         "descr": "Температура",
         "round": 1,
         "int": 15,
-        "num": 23
+        "num": 19
     },
     {
-        "name": "24. Cенсор влажности GY21",
+        "name": "20. Cенсор влажности GY21",
         "type": "Reading",
         "subtype": "GY21h",
         "id": "Hum4",
@@ -346,10 +284,10 @@
         "descr": "Влажность",
         "round": 1,
         "int": 15,
-        "num": 24
+        "num": 20
     },
     {
-        "name": "25. Cенсор температуры HDC1080",
+        "name": "21. Cенсор температуры HDC1080",
         "type": "Reading",
         "subtype": "Hdc1080t",
         "id": "Temp1080",
@@ -359,10 +297,10 @@
         "int": 15,
         "addr": "0x40",
         "round": 1,
-        "num": 25
+        "num": 21
     },
     {
-        "name": "26. Cенсор влажности HDC1080",
+        "name": "22. Cенсор влажности HDC1080",
         "type": "Reading",
         "subtype": "Hdc1080h",
         "id": "Hum1080",
@@ -372,10 +310,10 @@
         "int": 15,
         "addr": "0x40",
         "round": 1,
-        "num": 26
+        "num": 22
     },
     {
-        "name": "27. Cенсор температуры MAX6675",
+        "name": "23. Cенсор температуры MAX6675",
         "type": "Reading",
         "subtype": "Max6675t",
         "id": "maxtmp",
@@ -386,130 +324,20 @@
         "DO": 12,
         "CS": 13,
         "CLK": 14,
-        "num": 27
+        "num": 23
     },
     {
-        "name": "28. Датчик CO2 MHZ-19 UART",
+        "name": "24. Сканер кнопок 433 MHz",
+        "num": 24,
         "type": "Reading",
-        "subtype": "Mhz19uart",
+        "subtype": "RCswitch",
-        "id": "co2uart",
+        "id": "rsw",
-        "widget": "anydataPpm",
+        "int": 500,
-        "page": "Сенсоры",
+        "pinRx": 12,
-        "descr": "CO2uart",
+        "pinTx": 12
-        "plus": 0,
-        "multiply": 1,
-        "round": 1,
-        "pin": 0,
-        "rxPin": 14,
-        "txPin": 16,
-        "int": 15,
-        "range": 5000,
-        "ABC": 1,
-        "num": 28
     },
     {
-        "name": "29. Датчик CO2 MHZ-19 PWM",
+        "name": "25. Cенсор температуры Sht20",
-        "type": "Reading",
-        "subtype": "Mhz19pwm",
-        "id": "co2pwm",
-        "widget": "anydataPpm",
-        "page": "Сенсоры",
-        "descr": "CO2pwm",
-        "plus": 0,
-        "multiply": 1,
-        "round": 1,
-        "pin": 16,
-        "int": 300,
-        "num": 29
-    },
-    {
-        "name": "30. Cенсор температуры от MHZ-19 UART",
-        "type": "Reading",
-        "subtype": "Mhz19temp",
-        "id": "Mhz19temp",
-        "widget": "anydataTmp",
-        "page": "Сенсоры",
-        "descr": "Температура",
-        "plus": 0,
-        "multiply": 1,
-        "round": 1,
-        "rxPin": 14,
-        "txPin": 16,
-        "ABC": 1,
-        "int": 30,
-        "num": 30
-    },
-    {
-        "name": "31. Рабочий диапазон от MHZ-19 UART",
-        "type": "Reading",
-        "subtype": "Mhz19range",
-        "id": "Mhz19range",
-        "widget": "anydataPpm",
-        "page": "Сенсоры",
-        "descr": "Диапазон",
-        "plus": 0,
-        "multiply": 1,
-        "round": 1,
-        "rxPin": 14,
-        "txPin": 16,
-        "range": 5000,
-        "ABC": 1,
-        "int": 30,
-        "num": 31
-    },
-    {
-        "name": "32. Автокалибровка от MHZ-19 UART",
-        "type": "Reading",
-        "subtype": "Mhz19ABC",
-        "id": "Mhz19ABC",
-        "widget": "anydataDef",
-        "page": "Сенсоры",
-        "descr": "ABC",
-        "rxPin": 14,
-        "txPin": 16,
-        "range": 5000,
-        "ABC": 1,
-        "int": 30,
-        "num": 32
-    },
-    {
-        "name": "33. Датчик пыли SDS011 PM25",
-        "type": "Reading",
-        "subtype": "Sds011_25",
-        "id": "pmuart25",
-        "widget": "anydataPpm",
-        "page": "Сенсоры",
-        "descr": "PM-2.5",
-        "plus": 0,
-        "multiply": 1,
-        "round": 10,
-        "rxPin": 13,
-        "txPin": 12,
-        "int": 15,
-        "warmUp": 30,
-        "period": 300,
-        "num": 33
-    },
-    {
-        "name": "34. Датчик пыли SDS011 PM10",
-        "type": "Reading",
-        "subtype": "Sds011_10",
-        "id": "pmuart10",
-        "widget": "anydataPpm",
-        "page": "Сенсоры",
-        "descr": "PM-10",
-        "plus": 0,
-        "multiply": 1,
-        "round": 10,
-        "rxPin": 13,
-        "txPin": 12,
-        "int": 15,
-        "warmUp": 30,
-        "period": 300,
-        "num": 34
-    },
-    {
-        "name": "35. Cенсор температуры Sht20",
         "type": "Reading",
         "subtype": "Sht20t",
         "id": "tmp2",
@@ -518,10 +346,10 @@
         "descr": "Температура",
         "int": 15,
         "round": 1,
-        "num": 35
+        "num": 25
     },
     {
-        "name": "36. Cенсор влажности Sht20",
+        "name": "26. Cенсор влажности Sht20",
         "type": "Reading",
         "subtype": "Sht20h",
         "id": "Hum2",
@@ -530,11 +358,11 @@
         "descr": "Влажность",
         "int": 15,
         "round": 1,
-        "num": 36
+        "num": 26
     },
     {
-        "name": "37. Сонар HC-SR04",
+        "name": "27. Сонар HC-SR04",
-        "num": 37,
+        "num": 27,
         "type": "Reading",
         "subtype": "Sonar",
         "id": "sonar",
@@ -549,7 +377,7 @@
         "header": "Расширения"
     },
     {
-        "name": "38. Поддержка DS1302(1), DS1307(2), DS3231(3), RX8025(4)",
+        "name": "28. Поддержка DS1302(1), DS1307(2), DS3231(3), RX8025(4)",
         "type": "Reading",
         "subtype": "IarduinoRTC",
         "id": "RTC",
@@ -563,10 +391,10 @@
         "dat": 4,
         "defFormat": "d-m-Y",
         "ticker": 0,
-        "num": 38
+        "num": 28
     },
     {
-        "name": "39. Расширитель портов Mcp23017",
+        "name": "29. Расширитель портов Mcp23017",
         "type": "Reading",
         "subtype": "Mcp23017",
         "id": "Mcp",
@@ -576,10 +404,10 @@
         "int": "0",
         "addr": "0x20",
         "index": 1,
-        "num": 39
+        "num": 29
     },
     {
-        "name": "40. Доп. функции системы",
+        "name": "30. Доп. функции системы",
         "type": "Reading",
         "subtype": "SysExt",
         "id": "SysExt",
@@ -587,10 +415,10 @@
         "page": "",
         "descr": "",
         "int": 15,
-        "num": 40
+        "num": 30
     },
     {
-        "name": "41. Переменная",
+        "name": "31. Переменная",
         "type": "Reading",
         "subtype": "Variable",
         "id": "var",
@@ -599,6 +427,6 @@
         "descr": "",
         "int": "0",
         "val": "0",
-        "num": 41
+        "num": 31
     }
 ]

platformio.ini

@@ -39,7 +39,7 @@ build_src_filter =
 	${env:esp32_4mb_fromitems.build_src_filter}
 
 [platformio]
-default_envs = esp8266_4mb
+default_envs = esp32_4mb
 data_dir = data_svelte
 
 [common_env_data]
@@ -52,18 +52,15 @@ lib_deps_external =
 lib_deps = 
 	marcoschwartz/LiquidCrystal_I2C@^1.1.4
 	dfrobot/DFRobotDFPlayerMini @ ^1.0.5
-	CTBot @2.1.9
-	adafruit/Adafruit ADS1X15 @ ^2.3.0
 	Adafruit AHTX0
 	adafruit/Adafruit BME280 Library
 	adafruit/Adafruit BMP280 Library
 	beegee-tokyo/DHT sensor library for ESPx
 	milesburton/DallasTemperature@^3.9.1
-	openenergymonitor/EmonLib@1.1.0
 	https://github.com/JonasGMorsch/GY-21.git
 	ClosedCube HDC1080
 	adafruit/MAX6675 library
-	Nova Fitness Sds dust sensors library@1.5.1
+	rc-switch @ ^2.6.4
 	robtillaart/SHT2x@^0.1.1
 	adafruit/Adafruit MCP23017 Arduino Library@^2.0.2
 	adafruit/Adafruit BusIO @ ^1.13.0
@@ -73,21 +70,17 @@ build_src_filter =
 	+<modules\exec\ButtonOut>
 	+<modules\exec\IoTServo>
 	+<modules\exec\Mp3>
-	+<modules\exec\Telegram>
 	+<modules\exec\Timer>
-	+<modules\sensors\Ads1115>
 	+<modules\sensors\Aht20>
 	+<modules\sensors\AnalogAdc>
 	+<modules\sensors\Bme280>
 	+<modules\sensors\Bmp280>
 	+<modules\sensors\Dht1122>
 	+<modules\sensors\Ds18b20>
-	+<modules\sensors\Emon>
 	+<modules\sensors\GY21>
 	+<modules\sensors\Hdc1080>
 	+<modules\sensors\Max6675>
-	+<modules\sensors\Mhz19>
+	+<modules\sensors\RCswitch>
-	+<modules\sensors\Sds011>
 	+<modules\sensors\Sht20>
 	+<modules\sensors\Sonar>
 	+<modules\system\IarduinoRTC>
@@ -100,7 +93,16 @@ lib_deps =
 	marcoschwartz/LiquidCrystal_I2C@^1.1.4
 	https://github.com/RoboticsBrno/ServoESP32
 	dfrobot/DFRobotDFPlayerMini @ ^1.0.5
-	CTBot @2.1.9
+	Adafruit AHTX0
+	adafruit/Adafruit BME280 Library
+	adafruit/Adafruit BMP280 Library
+	beegee-tokyo/DHT sensor library for ESPx
+	milesburton/DallasTemperature@^3.9.1
+	https://github.com/JonasGMorsch/GY-21.git
+	ClosedCube HDC1080
+	adafruit/MAX6675 library
+	rc-switch @ ^2.6.4
+	robtillaart/SHT2x@^0.1.1
 	adafruit/Adafruit MCP23017 Arduino Library@^2.0.2
 	adafruit/Adafruit BusIO @ ^1.13.0
 build_src_filter = 
@@ -109,8 +111,19 @@ build_src_filter =
 	+<modules\exec\ButtonOut>
 	+<modules\exec\IoTServo>
 	+<modules\exec\Mp3>
-	+<modules\exec\Telegram>
 	+<modules\exec\Timer>
+	+<modules\sensors\Aht20>
+	+<modules\sensors\AnalogAdc>
+	+<modules\sensors\Bme280>
+	+<modules\sensors\Bmp280>
+	+<modules\sensors\Dht1122>
+	+<modules\sensors\Ds18b20>
+	+<modules\sensors\GY21>
+	+<modules\sensors\Hdc1080>
+	+<modules\sensors\Max6675>
+	+<modules\sensors\RCswitch>
+	+<modules\sensors\Sht20>
+	+<modules\sensors\Sonar>
 	+<modules\system\IarduinoRTC>
 	+<modules\system\Mcp23017>
 	+<modules\system\SysExt>

src/modules/API.cpp

@@ -5,21 +5,17 @@ void* getAPI_ButtonIn(String subtype, String params);
 void* getAPI_ButtonOut(String subtype, String params);
 void* getAPI_IoTServo(String subtype, String params);
 void* getAPI_Mp3(String subtype, String params);
-void* getAPI_Telegram(String subtype, String params);
 void* getAPI_Timer(String subtype, String params);
-void* getAPI_Ads1115(String subtype, String params);
 void* getAPI_Aht20(String subtype, String params);
 void* getAPI_AnalogAdc(String subtype, String params);
 void* getAPI_Bme280(String subtype, String params);
 void* getAPI_Bmp280(String subtype, String params);
 void* getAPI_Dht1122(String subtype, String params);
 void* getAPI_Ds18b20(String subtype, String params);
-void* getAPI_Emon(String subtype, String params);
 void* getAPI_GY21(String subtype, String params);
 void* getAPI_Hdc1080(String subtype, String params);
 void* getAPI_Max6675(String subtype, String params);
-void* getAPI_Mhz19(String subtype, String params);
+void* getAPI_RCswitch(String subtype, String params);
-void* getAPI_Sds011(String subtype, String params);
 void* getAPI_Sht20(String subtype, String params);
 void* getAPI_Sonar(String subtype, String params);
 void* getAPI_IarduinoRTC(String subtype, String params);
@@ -34,21 +30,17 @@ if ((tmpAPI = getAPI_ButtonIn(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_ButtonOut(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_IoTServo(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Mp3(subtype, params)) != nullptr) return tmpAPI;
-if ((tmpAPI = getAPI_Telegram(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Timer(subtype, params)) != nullptr) return tmpAPI;
-if ((tmpAPI = getAPI_Ads1115(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Aht20(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_AnalogAdc(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Bme280(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Bmp280(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Dht1122(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Ds18b20(subtype, params)) != nullptr) return tmpAPI;
-if ((tmpAPI = getAPI_Emon(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_GY21(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Hdc1080(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Max6675(subtype, params)) != nullptr) return tmpAPI;
-if ((tmpAPI = getAPI_Mhz19(subtype, params)) != nullptr) return tmpAPI;
+if ((tmpAPI = getAPI_RCswitch(subtype, params)) != nullptr) return tmpAPI;
-if ((tmpAPI = getAPI_Sds011(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Sht20(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Sonar(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_IarduinoRTC(subtype, params)) != nullptr) return tmpAPI;

src/modules/sensors/RCswitch/RCswitch.cpp

@@ -0,0 +1,73 @@
+#include "Global.h"
+#include "classes/IoTItem.h"
+
+#include <RCSwitch.h>
+
+RCSwitch mySwitch = RCSwitch();
+
+class RCswitch : public IoTItem {
+   private:
+    int _pinRx; // Выход радио модуля
+    int _pinTx; // Выход модуля передатчика
+
+   public:
+    RCswitch(String parameters): IoTItem(parameters) {
+        jsonRead(parameters, "pinRx", _pinRx);
+        jsonRead(parameters, "pinTx", _pinTx);
+        _interval = _interval / 1000;   // корректируем величину интервала int, теперь он в миллисекундах
+        if (_pinRx >= 0) {
+            Serial.printf("Protocol: %d", _pinRx);
+            mySwitch.enableReceive(digitalPinToInterrupt(_pinRx));
+        }
+        if (_pinTx >= 0)    
+            mySwitch.enableTransmit(_pinTx);
+    }
+
+    void doByInterval() {
+        if (_pinRx >= 0 && mySwitch.available()) {
+            // Serial.print("Received ");
+            //Serial.print( mySwitch.getReceivedValue() );
+            // Serial.print(" / ");                                       
+            // Serial.print( mySwitch.getReceivedBitlength() );
+            // Serial.print("bit ");
+            // Serial.print("Protocol: ");
+            // Serial.println( mySwitch.getReceivedProtocol() );
+            value.valD = mySwitch.getReceivedValue();
+            regEvent(value.valD, "RCswitch");                         
+       
+            mySwitch.resetAvailable();
+        }
+    }
+
+    IoTValue execute(String command, std::vector<IoTValue> &param) {
+        if (_pinTx >= 0)
+        if (command == "sendBitStr") {  // отправляем строку вида "000000000001010100010001"
+            if (param.size()) {
+                mySwitch.send(param[0].valS.c_str());
+                return {};
+            }
+        } else if (command == "sendTriState") { // отправляем строку вида "00000FFF0F0F"
+            if (param.size()) {
+                mySwitch.sendTriState(param[0].valS.c_str());
+                return {};
+            }
+        } else if (command == "sendDecimal") { // отправляем строку вида 5393 первым параметром и количество бит чтоб заполнить нулями
+            if (param.size()) {
+                mySwitch.send(param[0].valD, param[1].valD);
+                return {};
+            }
+        }  
+        return {}; 
+    }
+
+    ~RCswitch() {};
+};
+
+void* getAPI_RCswitch(String subtype, String param) {
+    if (subtype == F("RCswitch")) {
+        return new RCswitch(param);
+    } else {
+        return nullptr;  
+    }
+}
+

src/modules/sensors/RCswitch/modinfo.json

@@ -0,0 +1,43 @@
+{   
+    "menuSection": "Сенсоры",
+
+    "configItem": [{
+        "name": "Сканер кнопок 433 MHz",
+        "num": 31,
+        "type": "Reading",
+        "subtype": "RCswitch",
+        "id": "rsw",
+        "int": 500,
+        "pinRx": 12,
+        "pinTx": 12
+    }],
+    
+    "about": {
+        "authorName": "Serghei Crasnicov",
+        "authorContact": "https://t.me/Serghei63",
+        "authorGit": "https://github.com/Serghei63",
+        "specialThanks": "Valentin Khandriga @Valiuhaaa",
+        "moduleName": "RCswitch",
+        "moduleVersion": "1.0",
+        "moduleDesc": "Позволяет принимать и передавать байт-коды на частоте 433 MHz от и для простых пультов, кнопок, радиореле",
+        "propInfo": {
+            "pinRx": "GPIO номер, к которому подключен радио приемник 433 MHz. Если < 0, то приемник выключен",
+            "pinTx": "GPIO номер, к которому подключен радио передатчик 433 MHz. Если < 0, то передатчик выключен",
+            "int": "Количество миллисекунд между опросами датчика. 0 - читаем постоянно. (устранение повторений при нажатой кнопке)"
+        }
+    },
+
+    "defActive": true,
+
+    "devices": {
+        "esp32_4mb": [
+            "rc-switch @ ^2.6.4"
+        ],
+        "esp8266_1mb": [
+            "rc-switch @ ^2.6.4"
+        ],
+        "esp8266_4mb": [
+            "rc-switch @ ^2.6.4"
+        ]
+    }
+}