diff --git a/.gitignore b/.gitignore
index d74a9041..b9f3806a 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,3 +1,2 @@
 .pio
 .vscode
-/myProfile_wm.json
diff --git a/data_svelte/items.json b/data_svelte/items.json
index ed78c67e..f8cc2674 100644
--- a/data_svelte/items.json
+++ b/data_svelte/items.json
@@ -399,45 +399,7 @@
     },
     {
         "global": 0,
-        "name": "27. DS2423 счетчик 1",
-        "type": "Reading",
-        "subtype": "Ds2423a",
-        "id": "dscounta",
-        "widget": "anydataDef",
-        "page": "Счетчики",
-        "descr": "DS1 V",
-        "plus": 0,
-        "multiply": 1,
-        "pin": 4,
-        "index": 0,
-        "addr": "",
-        "int": 10,
-        "round": 0,
-        "needSave": 0,
-        "num": 27
-    },
-    {
-        "global": 0,
-        "name": "28. DS2423 счетчик 2",
-        "type": "Reading",
-        "subtype": "Ds2423b",
-        "id": "dscountb",
-        "widget": "anydataDef",
-        "page": "Счетчики",
-        "descr": "DS2 V",
-        "plus": 0,
-        "multiply": 1,
-        "pin": 4,
-        "index": 0,
-        "addr": "",
-        "int": 10,
-        "round": 0,
-        "needSave": 0,
-        "num": 28
-    },
-    {
-        "global": 0,
-        "name": "29. Аналоговый счетчик импульсов",
+        "name": "27. Аналоговый счетчик импульсов",
         "type": "Writing",
         "subtype": "Impulse",
         "id": "impulse",
@@ -450,32 +412,11 @@
         "pinMode": "INPUT",
         "debounceDelay": 3,
         "multiply": 1,
-        "num": 29
+        "num": 27
     },
     {
         "global": 0,
-        "name": "30. Cенсор температуры NTC",
-        "type": "Reading",
-        "subtype": "Ntc",
-        "id": "Ntctmp",
-        "widget": "anydataTmp",
-        "page": "Сенсоры",
-        "descr": "NTC Температура",
-        "needSave": 0,
-        "val": "0",
-        "int": 15,
-        "pin": "35",
-        "R1": "10000",
-        "R0": "10000",
-        "Beta": "3950.0",
-        "T0": "25",
-        "Vs": "3.3",
-        "round": 1,
-        "num": 30
-    },
-    {
-        "global": 0,
-        "name": "31. PZEM 004t Напряжение",
+        "name": "28. PZEM 004t Напряжение",
         "type": "Reading",
         "subtype": "Pzem004v",
         "id": "v",
@@ -485,11 +426,11 @@
         "int": 15,
         "addr": "0xF8",
         "round": 1,
-        "num": 31
+        "num": 28
     },
     {
         "global": 0,
-        "name": "32. PZEM 004t Сила тока",
+        "name": "29. PZEM 004t Сила тока",
         "type": "Reading",
         "subtype": "Pzem004a",
         "id": "a",
@@ -499,11 +440,11 @@
         "int": 15,
         "addr": "0xF8",
         "round": 1,
-        "num": 32
+        "num": 29
     },
     {
         "global": 0,
-        "name": "33. PZEM 004t Мощность",
+        "name": "30. PZEM 004t Мощность",
         "type": "Reading",
         "subtype": "Pzem004w",
         "id": "w",
@@ -513,11 +454,11 @@
         "int": 15,
         "addr": "0xF8",
         "round": 1,
-        "num": 33
+        "num": 30
     },
     {
         "global": 0,
-        "name": "34. PZEM 004t Энергия",
+        "name": "31. PZEM 004t Энергия",
         "type": "Reading",
         "subtype": "Pzem004wh",
         "id": "wh",
@@ -527,11 +468,11 @@
         "int": 15,
         "addr": "0xF8",
         "round": 1,
-        "num": 34
+        "num": 31
     },
     {
         "global": 0,
-        "name": "35. PZEM 004t Частота",
+        "name": "32. PZEM 004t Частота",
         "type": "Reading",
         "subtype": "Pzem004hz",
         "id": "hz",
@@ -541,11 +482,11 @@
         "int": 15,
         "addr": "0xF8",
         "round": 1,
-        "num": 35
+        "num": 32
     },
     {
         "global": 0,
-        "name": "36. PZEM 004t Косинус",
+        "name": "33. PZEM 004t Косинус",
         "type": "Reading",
         "subtype": "Pzem004pf",
         "id": "pf",
@@ -555,11 +496,11 @@
         "int": 15,
         "addr": "0xF8",
         "round": 1,
-        "num": 36
+        "num": 33
     },
     {
         "global": 0,
-        "name": "37. PZEM настройка",
+        "name": "34. PZEM настройка",
         "type": "Reading",
         "subtype": "Pzem004cmd",
         "id": "set",
@@ -571,11 +512,11 @@
         "changeaddr": 0,
         "setaddr": "0x01",
         "reset": 0,
-        "num": 37
+        "num": 34
     },
     {
         "global": 0,
-        "name": "38. Часы реального времени",
+        "name": "35. Часы реального времени",
         "type": "Reading",
         "subtype": "RTC",
         "id": "rtc",
@@ -591,11 +532,11 @@
         "int": 5,
         "btn-setUTime": "0",
         "btn-setSysTime": "nil",
-        "num": 38
+        "num": 35
     },
     {
-        "name": "39. (S8) Cенсор качества воздуха",
-        "num": 39,
+        "name": "36. (S8) Cенсор качества воздуха",
+        "num": 36,
         "type": "Reading",
         "subtype": "S8co",
         "id": "s8co",
@@ -609,50 +550,7 @@
     },
     {
         "global": 0,
-        "name": "40. SCD40 Углекислый газ",
-        "type": "Reading",
-        "subtype": "Scd40co2",
-        "id": "Scd40co2",
-        "widget": "anydataPpm",
-        "page": "Сенсоры",
-        "descr": "SCD40 Углекислый газ",
-        "int": 15,
-        "round": 0,
-        "lowPeriodic": 1,
-        "autoCalibration": 1,
-        "btn-Recalibration": 0,
-        "num": 40
-    },
-    {
-        "global": 0,
-        "name": "41. SCD40 Влажность",
-        "type": "Reading",
-        "subtype": "Scd40h",
-        "id": "Scd40h",
-        "widget": "anydataHum",
-        "page": "Сенсоры",
-        "descr": "SCD40 Влажность",
-        "int": 15,
-        "round": 1,
-        "num": 41
-    },
-    {
-        "global": 0,
-        "name": "42. SCD40 Температура",
-        "type": "Reading",
-        "subtype": "Scd40t",
-        "id": "Scd40t",
-        "widget": "anydataTmp",
-        "page": "Сенсоры",
-        "descr": "SCD40 Температура",
-        "int": 15,
-        "round": 1,
-        "offset": 4,
-        "num": 42
-    },
-    {
-        "global": 0,
-        "name": "43. Sht20 Температура",
+        "name": "37. Sht20 Температура",
         "type": "Reading",
         "subtype": "Sht20t",
         "id": "tmp2",
@@ -661,11 +559,11 @@
         "descr": "Температура",
         "int": 15,
         "round": 1,
-        "num": 43
+        "num": 37
     },
     {
         "global": 0,
-        "name": "44. Sht20 Влажность",
+        "name": "38. Sht20 Влажность",
         "type": "Reading",
         "subtype": "Sht20h",
         "id": "Hum2",
@@ -674,11 +572,11 @@
         "descr": "Влажность",
         "int": 15,
         "round": 1,
-        "num": 44
+        "num": 38
     },
     {
         "global": 0,
-        "name": "45. Sht30 Температура",
+        "name": "39. Sht30 Температура",
         "type": "Reading",
         "subtype": "Sht30t",
         "id": "tmp30",
@@ -687,11 +585,11 @@
         "descr": "SHT30 Температура",
         "int": 15,
         "round": 1,
-        "num": 45
+        "num": 39
     },
     {
         "global": 0,
-        "name": "46. Sht30 Влажность",
+        "name": "40. Sht30 Влажность",
         "type": "Reading",
         "subtype": "Sht30h",
         "id": "Hum30",
@@ -700,12 +598,12 @@
         "descr": "SHT30 Влажность",
         "int": 15,
         "round": 1,
-        "num": 46
+        "num": 40
     },
     {
         "global": 0,
-        "name": "47. HC-SR04 Ультразвуковой дальномер",
-        "num": 47,
+        "name": "41. HC-SR04 Ультразвуковой дальномер",
+        "num": 41,
         "type": "Reading",
         "subtype": "Sonar",
         "id": "sonar",
@@ -717,7 +615,7 @@
         "int": 5
     },
     {
-        "name": "48. UART",
+        "name": "42. UART",
         "type": "Reading",
         "subtype": "UART",
         "page": "",
@@ -729,14 +627,14 @@
         "line": 2,
         "speed": 9600,
         "eventFormat": 0,
-        "num": 48
+        "num": 42
     },
     {
         "header": "Исполнительные устройства"
     },
     {
         "global": 0,
-        "name": "49. Кнопка подключенная к пину",
+        "name": "43. Кнопка подключенная к пину",
         "type": "Writing",
         "subtype": "ButtonIn",
         "id": "btn",
@@ -751,11 +649,11 @@
         "debounceDelay": 50,
         "fixState": 0,
         "inv": 0,
-        "num": 49
+        "num": 43
     },
     {
         "global": 0,
-        "name": "50. Управление пином",
+        "name": "44. Управление пином",
         "type": "Writing",
         "subtype": "ButtonOut",
         "needSave": 0,
@@ -766,11 +664,11 @@
         "int": 0,
         "inv": 0,
         "pin": 2,
-        "num": 50
+        "num": 44
     },
     {
         "global": 0,
-        "name": "51. Пассивный звуковой извещатель",
+        "name": "45. Пассивный звуковой извещатель",
         "type": "Writing",
         "subtype": "Buzzer",
         "id": "buzzer",
@@ -789,11 +687,11 @@
         "cycle": 0,
         "indication": 1,
         "val": 0,
-        "num": 51
+        "num": 45
     },
     {
         "global": 0,
-        "name": "52. Энкодер",
+        "name": "46. Энкодер",
         "type": "Writing",
         "subtype": "Encoder",
         "id": "enc",
@@ -806,11 +704,11 @@
         "step": 1,
         "stepOnPress": 5,
         "pins": "4,5,2",
-        "num": 52
+        "num": 46
     },
     {
         "global": 0,
-        "name": "53. Сервопривод",
+        "name": "47. Сервопривод",
         "type": "Writing",
         "subtype": "IoTServo",
         "id": "servo",
@@ -821,11 +719,11 @@
         "pin": 12,
         "apin": -1,
         "amap": "0, 4096, 0, 180",
-        "num": 53
+        "num": 47
     },
     {
         "global": 0,
-        "name": "54. Расширитель портов Mcp23017",
+        "name": "48. Расширитель портов Mcp23017",
         "type": "Reading",
         "subtype": "Mcp23017",
         "id": "Mcp",
@@ -835,11 +733,11 @@
         "int": "0",
         "addr": "0x20",
         "index": 1,
-        "num": 54
+        "num": 48
     },
     {
         "global": 0,
-        "name": "55. MP3 плеер",
+        "name": "49. MP3 плеер",
         "type": "Reading",
         "subtype": "Mp3",
         "id": "mp3",
@@ -849,11 +747,11 @@
         "int": 1,
         "pins": "14,12",
         "volume": 20,
-        "num": 55
+        "num": 49
     },
     {
         "global": 0,
-        "name": "56. Сенсорная кнопка",
+        "name": "50. Сенсорная кнопка",
         "type": "Writing",
         "subtype": "Multitouch",
         "id": "impulse",
@@ -867,11 +765,11 @@
         "pinMode": "INPUT",
         "debounceDelay": 50,
         "PWMDelay": 500,
-        "num": 56
+        "num": 50
     },
     {
         "global": 0,
-        "name": "57. Расширитель портов Pcf8574",
+        "name": "51. Расширитель портов Pcf8574",
         "type": "Reading",
         "subtype": "Pcf8574",
         "id": "Pcf",
@@ -881,11 +779,11 @@
         "int": "0",
         "addr": "0x20",
         "index": 1,
-        "num": 57
+        "num": 51
     },
     {
         "global": 0,
-        "name": "58. PWM ESP8266",
+        "name": "52. PWM ESP8266",
         "type": "Writing",
         "subtype": "Pwm8266",
         "id": "pwm",
@@ -897,11 +795,11 @@
         "freq": 5000,
         "val": 0,
         "apin": -1,
-        "num": 58
+        "num": 52
     },
     {
         "global": 0,
-        "name": "59. Телеграм-Лайт",
+        "name": "53. Телеграм-Лайт",
         "type": "Writing",
         "subtype": "TelegramLT",
         "id": "tg",
@@ -910,14 +808,14 @@
         "descr": "",
         "token": "",
         "chatID": "",
-        "num": 59
+        "num": 53
     },
     {
         "header": "Экраны"
     },
     {
         "global": 0,
-        "name": "60. LCD экран 2004",
+        "name": "54. LCD экран 2004",
         "type": "Reading",
         "subtype": "Lcd2004",
         "id": "Lcd",
@@ -929,10 +827,10 @@
         "size": "20,4",
         "coord": "0,0",
         "id2show": "id датчика",
-        "num": 60
+        "num": 54
     },
     {
-        "name": "61. LCD экран 1602",
+        "name": "55. LCD экран 1602",
         "type": "Reading",
         "subtype": "Lcd2004",
         "id": "Lcd",
@@ -944,6 +842,6 @@
         "size": "16,2",
         "coord": "0,0",
         "id2show": "id датчика",
-        "num": 61
+        "num": 55
     }
 ]
\ No newline at end of file
diff --git a/data_svelte/myProfile.json b/data_svelte/myProfile.json
index 01261688..5db9116e 100644
--- a/data_svelte/myProfile.json
+++ b/data_svelte/myProfile.json
@@ -118,7 +118,7 @@
             },
             {
                 "path": "src/modules/sensors/Ds2423",
-                "active": true
+                "active": false
             },
             {
                 "path": "src/modules/sensors/Emon",
@@ -160,6 +160,10 @@
                 "path": "src/modules/sensors/IoTWiegand",
                 "active": false
             },
+            {
+                "path": "src/modules/sensors/ld2410",
+                "active": false
+            },
             {
                 "path": "src/modules/sensors/Max6675",
                 "active": false
@@ -170,7 +174,7 @@
             },
             {
                 "path": "src/modules/sensors/Ntc",
-                "active": true
+                "active": false
             },
             {
                 "path": "src/modules/sensors/Pzem004t",
@@ -190,7 +194,7 @@
             },
             {
                 "path": "src/modules/sensors/Scd40",
-                "active": true
+                "active": false
             },
             {
                 "path": "src/modules/sensors/Sds011",
@@ -238,6 +242,10 @@
                 "path": "src/modules/exec/EspCam",
                 "active": false
             },
+            {
+                "path": "src/modules/exec/Ftp",
+                "active": false
+            },
             {
                 "path": "src/modules/exec/HttpGet",
                 "active": false
@@ -312,6 +320,10 @@
                 "path": "src/modules/display/NextionUpload",
                 "active": false
             },
+            {
+                "path": "src/modules/display/Smi2_m",
+                "active": true
+            },
             {
                 "path": "src/modules/display/Ws2812b",
                 "active": false
diff --git a/data_svelte_lite/index.html b/data_svelte_lite/index.html
index 538417e1..42845542 100644
--- a/data_svelte_lite/index.html
+++ b/data_svelte_lite/index.html
@@ -8,14 +8,14 @@
     <link rel="icon" type="image/png" href="/favicon.ico" />
     <link
       rel="stylesheet"
-      href="https://iotmanager.org/esp01ota/build/bundle.css?443"
+      href="https://iotmanager.org/esp01ota/build/bundle.css?450"
     />
   </head>
 
   <body>
     <script>
       let script = document.createElement("script");
-      script.src = "https://iotmanager.org/esp01ota/build/bundle.js?443";
+      script.src = "https://iotmanager.org/esp01ota/build/bundle.js?450";
       script.onload = execute;
       document.head.append(script);
       script.onerror = error;
diff --git a/include/Const.h b/include/Const.h
index 47841990..25af4872 100644
--- a/include/Const.h
+++ b/include/Const.h
@@ -32,9 +32,17 @@
 #define FIRMWARE_NAME "esp32s2_4mb"
 #endif
 
-//Размер буфера json
-#define JSON_BUFFER_SIZE 2048  // держим 2 кб не меняем
-#define WEB_SOCKETS_FRAME_SIZE 2048
+// Размер буфера json
+#define JSON_BUFFER_SIZE 4096  // держим 2 кб не меняем
+
+/*
+WEB_SOCKETS_FRAME_SIZE создан для того что бы не загружать оперативку.
+Эта технология передаёт в сокеты большие файлы по частям.
+Чем меньше этот фрейм тем теоретически лучше.
+Но и сильно малый он тоже быть не должен.
+Я опытным путём установил что размер 1024 является оптимальным. Можно так же поставить 2048
+*/
+#define WEB_SOCKETS_FRAME_SIZE 1024
 
 // #define LOOP_DEBUG
 
diff --git a/include/classes/IoTItem.h b/include/classes/IoTItem.h
index ff899a20..772a3052 100644
--- a/include/classes/IoTItem.h
+++ b/include/classes/IoTItem.h
@@ -87,6 +87,7 @@ class IoTItem {
     int _map3 = 0;
     int _map4 = 0;
     int _round = 1;  // 1, 10, 100, 1000, 10000
+    int _numDigits = 1;     // количество целых значений, не значимые позиции заменяются нулем в строковом формате
 
     bool _global = false;  // характеристика айтема, что ему нужно слать и принимать события из внешнего мира
 };
diff --git a/include/utils/JsonUtils.h b/include/utils/JsonUtils.h
index a9810dc2..c48fd725 100644
--- a/include/utils/JsonUtils.h
+++ b/include/utils/JsonUtils.h
@@ -18,6 +18,7 @@ extern bool jsonRead(const String& json, String key, int& value, bool e = true);
 
 extern String jsonReadStr(const String& json, String name, bool e = true);
 extern int jsonReadInt(const String& json, String name, bool e = true);
+long int jsonReadLInt(const String& json, String name, bool e=true);
 extern boolean jsonReadBool(const String& json, String name, bool e = true);
 
 extern bool jsonWriteStr_(String& json, const String& name, const String& value, bool e = true);
diff --git a/include/utils/StringUtils.h b/include/utils/StringUtils.h
index 816d8353..ea403cfb 100644
--- a/include/utils/StringUtils.h
+++ b/include/utils/StringUtils.h
@@ -45,3 +45,7 @@ String uint64ToString(uint64_t input, uint8_t base = 10);
 void cleanString(String& str);
 
 unsigned char ChartoHex(char ch);
+
+std::vector<String> splitStr(const String& str, const String& delimiter);
+
+bool strInVector(const String& str, const std::vector<String>& vec);
diff --git a/iotm/esp32_4mb/400/firmware.bin b/iotm/esp32_4mb/400/firmware.bin
index 83335b7b..77631f73 100644
Binary files a/iotm/esp32_4mb/400/firmware.bin and b/iotm/esp32_4mb/400/firmware.bin differ
diff --git a/iotm/esp32_4mb/400/littlefs.bin b/iotm/esp32_4mb/400/littlefs.bin
index 0d4e51e0..ed4deb51 100644
Binary files a/iotm/esp32_4mb/400/littlefs.bin and b/iotm/esp32_4mb/400/littlefs.bin differ
diff --git a/iotm/esp8266_4mb/400/firmware.bin b/iotm/esp8266_4mb/400/firmware.bin
new file mode 100644
index 00000000..a9d20a6e
Binary files /dev/null and b/iotm/esp8266_4mb/400/firmware.bin differ
diff --git a/iotm/esp8266_4mb/400/littlefs.bin b/iotm/esp8266_4mb/400/littlefs.bin
new file mode 100644
index 00000000..6f1637d0
Binary files /dev/null and b/iotm/esp8266_4mb/400/littlefs.bin differ
diff --git a/myProfile.json b/myProfile.json
index bfac01c1..5db9116e 100644
--- a/myProfile.json
+++ b/myProfile.json
@@ -160,6 +160,10 @@
                 "path": "src/modules/sensors/IoTWiegand",
                 "active": false
             },
+            {
+                "path": "src/modules/sensors/ld2410",
+                "active": false
+            },
             {
                 "path": "src/modules/sensors/Max6675",
                 "active": false
@@ -316,6 +320,10 @@
                 "path": "src/modules/display/NextionUpload",
                 "active": false
             },
+            {
+                "path": "src/modules/display/Smi2_m",
+                "active": true
+            },
             {
                 "path": "src/modules/display/Ws2812b",
                 "active": false
diff --git a/platformio.ini b/platformio.ini
index a755fce0..2044bb55 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -248,11 +248,11 @@ lib_deps =
 	adafruit/Adafruit BME280 Library
 	adafruit/Adafruit BMP280 Library
 	https://github.com/milesburton/Arduino-Temperature-Control-Library
-	IRremote @ ^4.1.2
 	https://github.com/tremaru/iarduino_RTC
 	robtillaart/SHT2x@^0.1.1
 	WEMOS SHT3x@1.0.0
 	plerup/EspSoftwareSerial
+	gyverlibs/EncButton @ ^2.0
 	adafruit/Adafruit MCP23017 Arduino Library@^2.1.0
 	adafruit/Adafruit BusIO @ ^1.13.2
 	adafruit/Adafruit BusIO @ ^1.13.2
@@ -273,7 +273,7 @@ build_src_filter =
 	+<modules/sensors/Bmp280>
 	+<modules/sensors/Ds18b20>
 	+<modules/sensors/Impulse>
-	+<modules/sensors/IRswitch>
+	+<modules/sensors/Ntc>
 	+<modules/sensors/Pzem004t>
 	+<modules/sensors/RTC>
 	+<modules/sensors/Sht20>
@@ -282,6 +282,8 @@ build_src_filter =
 	+<modules/sensors/UART>
 	+<modules/exec/ButtonIn>
 	+<modules/exec/ButtonOut>
+	+<modules/exec/Buzzer>
+	+<modules/exec/Enconder>
 	+<modules/exec/Mcp23017>
 	+<modules/exec/Multitouch>
 	+<modules/exec/Pcf8574>
@@ -374,6 +376,7 @@ build_src_filter =
 	+<modules/sensors/Bmp280>
 	+<modules/sensors/Ds18b20>
 	+<modules/sensors/Impulse>
+	+<modules/sensors/Ntc>
 	+<modules/sensors/Pzem004t>
 	+<modules/sensors/RTC>
 	+<modules/sensors/Sht20>
@@ -382,6 +385,7 @@ build_src_filter =
 	+<modules/sensors/UART>
 	+<modules/exec/ButtonIn>
 	+<modules/exec/ButtonOut>
+	+<modules/exec/Buzzer>
 	+<modules/exec/Enconder>
 	+<modules/exec/Mcp23017>
 	+<modules/exec/Multitouch>
@@ -397,11 +401,7 @@ lib_deps =
 	adafruit/Adafruit BMP280 Library
 	beegee-tokyo/DHT sensor library for ESPx
 	https://github.com/milesburton/Arduino-Temperature-Control-Library
-	https://github.com/jbechter/arduino-onewire-DS2423
-	paulstoffregen/OneWire @ ^2.3.7
 	https://github.com/tremaru/iarduino_RTC
-	Sensirion I2C SCD4x @0.4.0
-	Sensirion Core @0.6.0
 	robtillaart/SHT2x@^0.1.1
 	WEMOS SHT3x@1.0.0
 	plerup/EspSoftwareSerial
@@ -428,13 +428,10 @@ build_src_filter =
 	+<modules/sensors/Bmp280>
 	+<modules/sensors/Dht1122>
 	+<modules/sensors/Ds18b20>
-	+<modules/sensors/Ds2423>
 	+<modules/sensors/Impulse>
-	+<modules/sensors/Ntc>
 	+<modules/sensors/Pzem004t>
 	+<modules/sensors/RTC>
 	+<modules/sensors/S8>
-	+<modules/sensors/Scd40>
 	+<modules/sensors/Sht20>
 	+<modules/sensors/Sht30>
 	+<modules/sensors/Sonar>
@@ -454,29 +451,43 @@ build_src_filter =
 
 [env:esp32_4mb_fromitems]
 lib_deps = 
+	https://github.com/enjoyneering/AHTxx.git
+	adafruit/Adafruit BME280 Library
+	adafruit/Adafruit BMP280 Library
+	beegee-tokyo/DHT sensor library for ESPx
 	https://github.com/milesburton/Arduino-Temperature-Control-Library
-	https://github.com/jbechter/arduino-onewire-DS2423
-	paulstoffregen/OneWire @ ^2.3.7
 	https://github.com/tremaru/iarduino_RTC
+	robtillaart/SHT2x@^0.1.1
 	WEMOS SHT3x@1.0.0
 	plerup/EspSoftwareSerial
 	gyverlibs/EncButton @ ^2.0
+	https://github.com/RoboticsBrno/ServoESP32
+	adafruit/Adafruit MCP23017 Arduino Library@^2.1.0
 	adafruit/Adafruit BusIO @ ^1.13.2
+	dfrobot/DFRobotDFPlayerMini @ ^1.0.5
+	adafruit/Adafruit BusIO @ ^1.13.2
+	https://github.com/robotclass/RobotClass_LiquidCrystal_I2C
+	marcoschwartz/LiquidCrystal_I2C@^1.1.4
 build_src_filter = 
 	+<modules/virtual/Cron>
-	+<modules/virtual/GoogleSheet>
 	+<modules/virtual/Loging>
 	+<modules/virtual/LogingDaily>
 	+<modules/virtual/Timer>
 	+<modules/virtual/Variable>
 	+<modules/virtual/VariableColor>
 	+<modules/virtual/VButton>
+	+<modules/sensors/Acs712>
+	+<modules/sensors/AhtXX>
 	+<modules/sensors/AnalogAdc>
+	+<modules/sensors/Bme280>
+	+<modules/sensors/Bmp280>
+	+<modules/sensors/Dht1122>
 	+<modules/sensors/Ds18b20>
-	+<modules/sensors/Ds2423>
 	+<modules/sensors/Impulse>
-	+<modules/sensors/Ntc>
+	+<modules/sensors/Pzem004t>
 	+<modules/sensors/RTC>
+	+<modules/sensors/S8>
+	+<modules/sensors/Sht20>
 	+<modules/sensors/Sht30>
 	+<modules/sensors/Sonar>
 	+<modules/sensors/UART>
@@ -484,9 +495,15 @@ build_src_filter =
 	+<modules/exec/ButtonOut>
 	+<modules/exec/Buzzer>
 	+<modules/exec/Enconder>
+	+<modules/exec/IoTServo>
+	+<modules/exec/Mcp23017>
+	+<modules/exec/Mp3>
 	+<modules/exec/Multitouch>
 	+<modules/exec/Pcf8574>
 	+<modules/exec/Pwm32>
+	+<modules/exec/TelegramLT>
+	+<modules/display/Lcd2004>
+	+<modules/display/Smi2_m>
 
 [env:esp32s2_4mb_fromitems]
 lib_deps = 
diff --git a/src/Main.cpp b/src/Main.cpp
index 6185235f..fccafe59 100644
--- a/src/Main.cpp
+++ b/src/Main.cpp
@@ -3,7 +3,7 @@
 #include "classes/IoTDB.h"
 #include "utils/Statistic.h"
 #include <Wire.h>
-#ifdef esp32s2_4mb  
+#ifdef esp32s2_4mb
 #include <USB.h>
 #endif
 
@@ -80,9 +80,9 @@ void stopErrorMarker(int id) {
 }
 
 void setup() {
-#ifdef esp32s2_4mb    
+#ifdef esp32s2_4mb
     USB.begin();
-#endif    
+#endif
 #ifdef esp32_4mb
     My_timer = timerBegin(0, 80, true);
     timerAttachInterrupt(My_timer, &onTimer, true);
@@ -107,7 +107,7 @@ void setup() {
     Serial.println("FIRMWARE NAME     " + String(FIRMWARE_NAME));
     Serial.println("FIRMWARE VERSION  " + String(FIRMWARE_VERSION));
     Serial.println("WEB VERSION       " + getWebVersion());
-    const String buildTime = String(BUILD_DAY) + "/" + String(BUILD_MONTH) + "/" + String(BUILD_YEAR) + " " + String(BUILD_HOUR) + ":" + String(BUILD_MIN) + ":" + String(BUILD_SEC);
+    const String buildTime = String(BUILD_DAY) + "." + String(BUILD_MONTH) + "." + String(BUILD_YEAR) + " " + String(BUILD_HOUR) + ":" + String(BUILD_MIN) + ":" + String(BUILD_SEC);
     Serial.println("BUILD TIME        " + buildTime);
     jsonWriteStr_(errorsHeapJson, F("bt"), buildTime);
     Serial.println(F("------------------------"));
diff --git a/src/classes/IoTItem.cpp b/src/classes/IoTItem.cpp
index 73918f46..28557848 100644
--- a/src/classes/IoTItem.cpp
+++ b/src/classes/IoTItem.cpp
@@ -15,6 +15,7 @@ IoTItem::IoTItem(const String& parameters) {
     if (!jsonRead(parameters, F("multiply"), _multiply, false)) _multiply = 1;
     if (!jsonRead(parameters, F("plus"), _plus, false)) _plus = 0;
     if (!jsonRead(parameters, F("round"), _round, false)) _round = -1;
+    if (!jsonRead(parameters, F("numDigits"), _numDigits, false)) _numDigits = 1;
 
     if (!jsonRead(parameters, F("global"), _global, false)) _global = false;
 
@@ -119,9 +120,9 @@ String IoTItem::getRoundValue() {
     if (_round >= 0 && _round <= 6) {
         int sot = _round ? pow(10, (int)_round) : 1;
         value.valD = round(value.valD * sot) / sot;
-
+        //todo: оптимизировать. Вынести расчет строки формата округления, чтоб использовать постоянно готовую
         char buf[15];
-        sprintf(buf, ("%1." + (String)_round + "f").c_str(), value.valD);
+        sprintf(buf, ("%0" + (String)(_numDigits + _round) + "." + (String)_round + "f").c_str(), value.valD);
         value.valS = (String)buf;
         return value.valS;
     } else {
diff --git a/src/modules/API.cpp b/src/modules/API.cpp
index 643660ee..e4f040c1 100644
--- a/src/modules/API.cpp
+++ b/src/modules/API.cpp
@@ -15,13 +15,10 @@ void* getAPI_Bme280(String subtype, String params);
 void* getAPI_Bmp280(String subtype, String params);
 void* getAPI_Dht1122(String subtype, String params);
 void* getAPI_Ds18b20(String subtype, String params);
-void* getAPI_Ds2423(String subtype, String params);
 void* getAPI_Impulse(String subtype, String params);
-void* getAPI_Ntc(String subtype, String params);
 void* getAPI_Pzem004(String subtype, String params);
 void* getAPI_RTC(String subtype, String params);
 void* getAPI_S8(String subtype, String params);
-void* getAPI_Scd40(String subtype, String params);
 void* getAPI_Sht20(String subtype, String params);
 void* getAPI_Sht30(String subtype, String params);
 void* getAPI_Sonar(String subtype, String params);
@@ -56,13 +53,10 @@ if ((tmpAPI = getAPI_Bme280(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Bmp280(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Dht1122(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Ds18b20(subtype, params)) != nullptr) return tmpAPI;
-if ((tmpAPI = getAPI_Ds2423(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Impulse(subtype, params)) != nullptr) return tmpAPI;
-if ((tmpAPI = getAPI_Ntc(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Pzem004(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_RTC(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_S8(subtype, params)) != nullptr) return tmpAPI;
-if ((tmpAPI = getAPI_Scd40(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Sht20(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Sht30(subtype, params)) != nullptr) return tmpAPI;
 if ((tmpAPI = getAPI_Sonar(subtype, params)) != nullptr) return tmpAPI;
diff --git a/src/modules/display/Lcd2004/Lcd2004.cpp b/src/modules/display/Lcd2004/Lcd2004.cpp
index 0caf4ebe..5ddd92b5 100644
--- a/src/modules/display/Lcd2004/Lcd2004.cpp
+++ b/src/modules/display/Lcd2004/Lcd2004.cpp
@@ -1,22 +1,14 @@
 #include "Global.h"
 #include "classes/IoTItem.h"
-
-//#include "LiquidCrystal_I2C.h"
 #include <RobotClass_LiquidCrystal_I2C.h>
 
-#include <map>
-
-void scanI2C();
-
-//LiquidCrystal_I2C *LCDI2C;
 RobotClass_LiquidCrystal_I2C *LCDI2C;
 
 class Lcd2004 : public IoTItem {
    private:
     unsigned int _x;
     unsigned int _y;
-    String _id2show;
-    String _descr;
+    String _id2show, _prefix = "", _postfix = "";
     int _prevStrSize;
     String _addr;
 
@@ -37,42 +29,52 @@ class Lcd2004 : public IoTItem {
         int w = selectFromMarkerToMarker(size, ",", 0).toInt();  //количество столбцов
         int h = selectFromMarkerToMarker(size, ",", 1).toInt();  //количество строк
         if (LCDI2C == nullptr) {                                 //инициализации экрана еще не было
-            //LCDI2C = new LiquidCrystal_I2C(hexStringToUint8(_addr), w, h);
             LCDI2C = new RobotClass_LiquidCrystal_I2C(hexStringToUint8(_addr), w, h, CP_UTF8);
             if (LCDI2C != nullptr) {
                 LCDI2C->init();
+                LCDI2C->clear();
+                LCDI2C->backlight();
             }
         }
-            
-        LCDI2C->clear();
-        LCDI2C->backlight();
 
         jsonRead(parameters, "coord", xy);
         _x = selectFromMarkerToMarker(xy, ",", 0).toInt();
         _y = selectFromMarkerToMarker(xy, ",", 1).toInt();
 
-        jsonRead(parameters, "descr", _descr);
         jsonRead(parameters, "id2show", _id2show);
+        jsonRead(parameters, "prefix", _prefix);
+        jsonRead(parameters, "postfix", _postfix);
     }
 
-    void doByInterval() {
-        if (LCDI2C != nullptr) {
-            printBlankStr(_prevStrSize);
-            
-            String tmpStr = getItemValue(_id2show);
-            if (_descr != "none") tmpStr = _descr + " " + tmpStr;
-            LCDI2C->setCursor(_x, _y);
-            LCDI2C->print(tmpStr);
-            
-            //LCDI2C->print("Helloy,Manager 404 !");
-            //Serial.printf("ffff %s\n", _id2show);
-            _prevStrSize = tmpStr.length();
-        } else {
-            scanI2C();
+     void drawItem(IoTItem* item) {
+        String tmpStr = _prefix;
+        tmpStr += item->getValue();
+        tmpStr += _postfix;
+
+        printBlankStr(_prevStrSize);
+        LCDI2C->setCursor(_x, _y);
+        LCDI2C->print(tmpStr);
+        _prevStrSize = tmpStr.length();
+    }
+
+    void setValue(const IoTValue& Value, bool genEvent = true) {
+        if (LCDI2C == nullptr) return;
+
+        value = Value;
+        drawItem(this);
+        IoTItem::setValue(Value, genEvent);
+    }
+
+    void onRegEvent(IoTItem* eventItem) {
+        if (LCDI2C == nullptr) { scanI2C(); return;}
+        if (!eventItem || _id2show == "") return; 
+
+        if (_id2show == eventItem->getID()) {
+            setValue(eventItem->value, false);
         }
     }
 
-    IoTValue execute(String command, std::vector<IoTValue> &param) {  // будет возможным использовать, когда сценарии запустятся
+    IoTValue execute(String command, std::vector<IoTValue> &param) {
         if (command == "noBacklight")
             LCDI2C->noBacklight();
         else if (command == "backlight")
@@ -99,9 +101,13 @@ class Lcd2004 : public IoTItem {
             if (param.size()) {
                 _y = param[0].valD;
             }
-        } else if (command == "descr") {
+        } else if (command == "prefix") {
             if (param.size()) {
-                _descr = param[0].valS;
+                _prefix = param[0].valS;
+            }
+        } else if (command == "postfix") {
+            if (param.size()) {
+                _postfix = param[0].valS;
             }
         } else if (command == "id2show") {
             if (param.size()) {
diff --git a/src/modules/display/Lcd2004/modinfo.json b/src/modules/display/Lcd2004/modinfo.json
index 024750b8..0cc656ef 100644
--- a/src/modules/display/Lcd2004/modinfo.json
+++ b/src/modules/display/Lcd2004/modinfo.json
@@ -7,30 +7,32 @@
         "type": "Reading",
         "subtype": "Lcd2004",
         "id": "Lcd",
-        "widget": "",
-        "page": "",
-        "descr": "T",
+        "widget": "inputTxt",
+        "page": "Экраны",
+        "descr": "LCD Экран",
         
-        "int": 15,
         "addr": "0x27",
         "size": "20,4",
         "coord": "0,0",
-        "id2show": "id датчика"
+        "id2show": "",
+        "prefix": "",
+        "postfix": ""
     },
     {
         "name": "LCD экран 1602",
         "type": "Reading",
         "subtype": "Lcd2004",
         "id": "Lcd",
-        "widget": "",
-        "page": "",
-        "descr": "T",
+        "widget": "inputTxt",
+        "page": "Экраны",
+        "descr": "LCD Экран",
         
-        "int": 15,
         "addr": "0x27",
         "size": "16,2",
         "coord": "0,0",
-        "id2show": "id датчика"
+        "id2show": "",
+        "prefix": "",
+        "postfix": ""
     }],
     
     "about": {
@@ -46,11 +48,12 @@
         },
         "moduleDesc": "Позволяет выводить на символьные экраны по указанным позициям значения других элементов конфигурации.",
         "propInfo": {
-            "int": "Период времени в секундах обновления информации на экране по конкретному элементу.",
-            "addr": "Адрес устройства на шине, обычно 0x27.",
+            "addr": "Адрес устройства на шине, обычно 0x27. Установите пустую строку для включения режима сканирования адресов на шине (результат в консоли).",
             "size": "Размерность матрицы экрана.",
             "coord": "Координата позиции для вывода данных элемента конфигурации.",
-            "id2show": "id элемента конфигурации."
+            "id2show": "id элемента конфигурации для отображения на экране. Если пустое значение, то данные берутся из собственной переменной.",
+            "prefix": "Символы до значения.",
+            "postfix": "Символы после значения."
         },
         "funcInfo": [
             {
@@ -89,10 +92,15 @@
                 "params": ["Номер столбца первого символа"]
             },
             {
-                "name": "descr",
+                "name": "prefix",
                 "descr": "Задает приставку слева от значения",
                 "params": ["Строка"]
             },
+            {
+                "name": "postfix",
+                "descr": "Задает приставку справа от значения",
+                "params": ["Строка"]
+            },
             {
                 "name": "id2show",
                 "descr": "Задает ИД элемента, значение которого хотим отображать на экране",
diff --git a/src/modules/display/Smi2_m/Modbus_master_for_Smi2_m.cpp b/src/modules/display/Smi2_m/Modbus_master_for_Smi2_m.cpp
new file mode 100644
index 00000000..8535ffdb
--- /dev/null
+++ b/src/modules/display/Smi2_m/Modbus_master_for_Smi2_m.cpp
@@ -0,0 +1,150 @@
+#include "Modbus_master_for_Smi2_m.h"
+
+Smi_display::Smi_display() {
+}
+
+// Modbus Master
+void Smi_display::modbus_update() {
+    idle();
+}
+
+void Smi_display::idle() {
+    static unsigned int packet_index;
+
+    unsigned int failed_connections = 0;
+
+    unsigned char current_connection;
+
+    do {
+        if (packet_index == total_no_of_packets)  // wrap around to the beginning
+            packet_index = 0;
+
+        // proceed to the next packet
+        packet = &packetArray[packet_index];
+
+        // get the current connection status
+        current_connection = packet->connection;
+
+        if (!current_connection) {
+            // If all the connection attributes are false return
+            // immediately to the main sketch
+            if (++failed_connections == total_no_of_packets)
+                return;
+        }
+        packet_index++;
+
+        // if a packet has no connection get the next one
+    } while (!current_connection);
+
+    constructPacket();
+}
+
+void Smi_display::constructPacket() {
+    packet->requests++;
+    frame[0] = packet->id;
+    frame[1] = packet->function;
+    frame[2] = packet->address >> 8;    // address Hi
+    frame[3] = packet->address & 0xFF;  // address Lo
+    frame[4] = packet->data >> 8;       // MSB
+    frame[5] = packet->data & 0xFF;     // LSB
+
+    unsigned char frameSize;
+
+    // construct the frame according to the modbus function
+    if (packet->function == PRESET_MULTIPLE_REGISTERS)
+        frameSize = construct_F16();
+    else                // else functions 1,2,3,4,5 & 6 is assumed. They all share the exact same request format.
+        frameSize = 8;  // the request is always 8 bytes in size for the above mentioned functions.
+
+    unsigned int crc16 = calculateCRC(frameSize - 2);
+    frame[frameSize - 2] = crc16 >> 8;  // split crc into 2 bytes
+    frame[frameSize - 1] = crc16 & 0xFF;
+    sendPacket(frameSize);
+}
+
+unsigned char Smi_display::construct_F16() {
+    unsigned char no_of_bytes = packet->data * 2;
+
+    // first 6 bytes of the array + no_of_bytes + 2 bytes CRC
+    frame[6] = no_of_bytes;   // number of bytes
+    unsigned char index = 7;  // user data starts at index 7
+    unsigned char no_of_registers = packet->data;
+    /*unsigned*/ int temp;
+
+    for (unsigned char i = 0; i < no_of_registers; i++) {
+        temp = register_array[packet->local_start_address + i];  // get the data
+        frame[index] = temp >> 8;
+        index++;
+        frame[index] = temp & 0xFF;
+        index++;
+    }
+    unsigned char frameSize = (9 + no_of_bytes);  // first 7 bytes of the array + 2 bytes CRC + noOfBytes
+    return frameSize;
+}
+
+void Smi_display::modbus_configure(HardwareSerial* SerialPort,
+                                   long baud,
+                                   unsigned char byteFormat,
+                                   int rx,
+                                   int tx,
+                                   unsigned int _TxEnablePin,
+                                   Packet* _packets,
+                                   unsigned int _total_no_of_packets,
+                                   /*unsigned*/ int* _register_array) {
+    TxEnablePin = _TxEnablePin;
+    total_no_of_packets = _total_no_of_packets;
+    packetArray = _packets;
+    register_array = _register_array;
+
+    ModbusPort = SerialPort;
+    (*ModbusPort).begin(baud, byteFormat, rx, tx);
+
+    pinMode(TxEnablePin, OUTPUT);
+    digitalWrite(TxEnablePin, LOW);
+}
+
+void Smi_display::modbus_construct(Packet* _packet,
+                                   unsigned char id,
+                                   unsigned char function,
+                                   unsigned int address,
+                                   unsigned int data,
+                                   unsigned int local_start_address) {
+    _packet->id = id;
+    _packet->function = function;
+    _packet->address = address;
+    _packet->data = data;
+    _packet->local_start_address = local_start_address;
+    _packet->connection = 1;
+}
+
+unsigned int Smi_display::calculateCRC(unsigned char bufferSize) {
+    unsigned int temp, temp2, flag;
+    temp = 0xFFFF;
+    for (unsigned char i = 0; i < bufferSize; i++) {
+        temp = temp ^ frame[i];
+        for (unsigned char j = 1; j <= 8; j++) {
+            flag = temp & 0x0001;
+            temp >>= 1;
+            if (flag)
+                temp ^= 0xA001;
+        }
+    }
+    // Reverse byte order.
+    temp2 = temp >> 8;
+    temp = (temp << 8) | temp2;
+    temp &= 0xFFFF;
+    // the returned value is already swapped
+    // crcLo byte is first & crcHi byte is last
+    return temp;
+}
+
+void Smi_display::sendPacket(unsigned char bufferSize) {
+    digitalWrite(TxEnablePin, HIGH);
+
+    for (unsigned char i = 0; i < bufferSize; i++)
+        (*ModbusPort).write(frame[i]);
+
+    (*ModbusPort).flush();
+
+    digitalWrite(TxEnablePin, LOW);
+}
\ No newline at end of file
diff --git a/src/modules/display/Smi2_m/Modbus_master_for_Smi2_m.h b/src/modules/display/Smi2_m/Modbus_master_for_Smi2_m.h
new file mode 100644
index 00000000..1dc2dfbc
--- /dev/null
+++ b/src/modules/display/Smi2_m/Modbus_master_for_Smi2_m.h
@@ -0,0 +1,71 @@
+#pragma once
+#include "HardwareSerial.h"
+
+#define PRESET_MULTIPLE_REGISTERS 16
+#define BUFFER_SIZE 64
+
+typedef struct
+{
+    unsigned char id;
+    unsigned char function;
+    unsigned int address;
+
+    unsigned int data;
+    unsigned int local_start_address;
+
+    unsigned int requests;
+    unsigned int successful_requests;
+    unsigned int failed_requests;
+    unsigned int exception_errors;
+    unsigned int retries;
+
+    unsigned char connection;
+
+} Packet;
+
+class Smi_display {
+   public:
+    Smi_display();
+
+    ~Smi_display();
+
+   public:
+    void modbus_update();
+    void modbus_construct(Packet* _packet,
+                          unsigned char id,
+                          unsigned char function,
+                          unsigned int address,
+                          unsigned int data,
+                          unsigned _local_start_address);
+
+    void modbus_configure(HardwareSerial* SerialPort,
+                          long baud,
+                          unsigned char byteFormat,
+                          int rx,
+                          int tx,
+                          unsigned int _TxEnablePin,
+                          Packet* _packets,
+                          unsigned int _total_no_of_packets,
+                          /*unsigned*/ int* _register_array);
+
+   private:
+    void idle();
+    void constructPacket();
+    unsigned char construct_F16();
+    unsigned int calculateCRC(unsigned char bufferSize);
+    void sendPacket(unsigned char bufferSize);
+
+   private:
+    unsigned char state;
+    unsigned char retry_count;
+    unsigned int TxEnablePin;
+    unsigned char frame[BUFFER_SIZE];
+    unsigned char buffer;
+    unsigned int T1_5;
+    unsigned int frameDelay;
+    unsigned int total_no_of_packets;
+    Packet* packetArray;
+    Packet* packet;
+    /*unsigned*/ int* register_array;
+    HardwareSerial* ModbusPort;
+};
diff --git a/src/modules/display/Smi2_m/Smi2_m.cpp b/src/modules/display/Smi2_m/Smi2_m.cpp
new file mode 100644
index 00000000..a93572cc
--- /dev/null
+++ b/src/modules/display/Smi2_m/Smi2_m.cpp
@@ -0,0 +1,71 @@
+
+#include "Global.h"
+#include "classes/IoTItem.h"
+
+#include "Modbus_master_for_Smi2_m.h"
+
+// Общая сумма доступной памяти на ведущем устройстве, чтобы хранить данные
+#define TOTAL_NO_OF_REGISTERS 4
+
+// This is the easiest way to create new packets
+// Add as many as you want. TOTAL_NO_OF_PACKETS
+// is automatically updated.
+enum {
+    PACKET1,
+    TOTAL_NO_OF_PACKETS  // leave this last entry
+};
+
+// Масив пакетов модбус
+Packet packets[TOTAL_NO_OF_PACKETS];
+
+// Массив хранения содержимого принятых и передающихся регистров
+/*unsigned*/ int regs[TOTAL_NO_OF_REGISTERS];
+
+class Smi2_m : public IoTItem {
+   private:
+    Smi_display* smi;
+    unsigned int _pin;  // номер порта, управляющий передачей по RS-485
+    long int _baud;     // скорость обмена, бит/с
+    int _rx, _tx;       // номера ножек мк, к которым подключен UART
+    String _show;
+    int i = 10;
+
+   public:
+   public:
+    Smi2_m(String parameters) : IoTItem(parameters) {
+        smi = new Smi_display();
+
+        _pin = jsonReadInt(parameters, "pin");
+        _baud = jsonReadLInt(parameters, "baud");
+        _rx = jsonReadInt(parameters, "rx");
+        _tx = jsonReadInt(parameters, "tx");
+        // Настраиваем пакеты
+        //  Шестой параметр - это индекс ячейки в массиве, размещенном в памяти ведущего устройства, в которую будет
+        //  помещен результат или из которой будут браться данные для передачи в подчиненное устройство. В нашем коде - это массив reg
+        //  Пакет,SLAVE адрес,функция модбус,адрес регистра,количесво запрашиваемых регистров,локальный адрес регистра.
+        //  Пакет,SLAVE адрес,функция модбус,адрес регистра,данные,локальный адрес регистра.
+        smi->modbus_construct(&packets[PACKET1], 1, PRESET_MULTIPLE_REGISTERS, 4200, 1, 0);
+        smi->modbus_configure(&Serial, _baud, SERIAL_8N1, _rx, _tx, _pin, packets, TOTAL_NO_OF_PACKETS, regs);
+
+        jsonRead(parameters, "id2show", _show);
+    }
+
+    void doByInterval() {
+        if (smi) {
+            smi->modbus_update();
+
+            float tmpStr = getItemValue(_show).toFloat();
+            regs[0] = tmpStr * 10;
+        }
+    }
+
+    ~Smi2_m(){};
+};
+
+void* getAPI_Smi2_m(String subtype, String param) {
+    if (subtype == F("Smi2_m")) {
+        return new Smi2_m(param);
+    } else {
+        return nullptr;
+    }
+}
diff --git a/src/modules/display/Smi2_m/modinfo.json b/src/modules/display/Smi2_m/modinfo.json
new file mode 100644
index 00000000..360e6374
--- /dev/null
+++ b/src/modules/display/Smi2_m/modinfo.json
@@ -0,0 +1,56 @@
+{
+    "menuSection": "Экраны",
+    "configItem": [
+        {
+            "global": 0,
+            "name": "Smi2_m",
+            "type": "Writing",
+            "subtype": "Smi2_m",
+            "id": "Smi",
+            "widget": "",
+            "page": "Дисплеи",
+            "descr": "",
+            "int": 2,
+            "pin": 4,
+            "id2show": "id датчика",
+            "baud": "9600",
+            "rx": "16",
+            "tx": "17"
+        }
+    ],
+    "about": {
+        "moduleName": "Smi2_m",
+        "moduleVersion": "1.0",
+        "usedRam": {
+            "esp32_4mb": 15,
+            "esp8266_4mb": 15
+        },
+        "moduleDesc": "Позволяет вывести индикацию на семисегментный индикатор по Modbus (Работает в Slave режиме, Read Holding Registers 0х03)",
+        "propInfo": {
+            "int": "Период времени в секундах обновления информации на экране по конкретному элементу.",
+            "pin": "номер порта, управляющий передачей по RS-485",
+            "id2show": "id элемента конфигурации.",
+            "baud": "скорость обмена, бит/с"
+        },
+        "funcInfo": [
+            {
+                "name": "descr",
+                "descr": "Задает приставку слева от значения",
+                "params": [
+                    "Строка"
+                ]
+            },
+            {
+                "name": "id2show",
+                "descr": "Задает ИД элемента, значение которого хотим отображать на экране",
+                "params": [
+                    "Имя элемента конфигурации"
+                ]
+            }
+        ]
+    },
+    "defActive": true,
+    "usedLibs": {
+        "esp32_4mb": []
+    }
+}
\ No newline at end of file
diff --git a/src/modules/display/TM16XX/TM16XX.cpp b/src/modules/display/TM16XX/TM16XX.cpp
new file mode 100644
index 00000000..7a8a1b3d
--- /dev/null
+++ b/src/modules/display/TM16XX/TM16XX.cpp
@@ -0,0 +1,86 @@
+#include "Global.h"
+#include "classes/IoTItem.h"
+
+#include <TM1637.h>
+#include <TM1638.h>
+#include <TM16xxDisplay.h>
+
+
+
+class TM16XX : public IoTItem {
+   private:
+    TM16xxDisplay *_display = nullptr;
+    TM16xx *_module = nullptr;
+    std::vector<String> _ids2show;
+
+   public:
+    TM16XX(String parameters) : IoTItem(parameters) {
+        //jsonRead(parameters, "id2show", _id2show);
+
+        int DIO, CLK, STB, chip, numDigits, intensity;
+        bool onoff;
+        String id2show;
+        jsonRead(parameters, "DIO", DIO);
+        jsonRead(parameters, "CLK", CLK);
+        jsonRead(parameters, "STB", STB);
+        jsonRead(parameters, "chip", chip);
+        jsonRead(parameters, "numDigits", numDigits);
+        jsonRead(parameters, "intensity", intensity);
+        jsonRead(parameters, "on", onoff);
+
+        jsonRead(parameters, "id2show", id2show);
+        if (id2show != "") _ids2show = splitStr(id2show, ",");
+
+        if (chip == 1637) {
+            _module = new TM1637(DIO, CLK, numDigits);
+        } else if (chip == 1638) {
+            _module = new TM1638(DIO, CLK, STB, numDigits);
+        }
+        _module->setupDisplay(onoff, intensity);
+        _display = new TM16xxDisplay(_module, numDigits);
+    }
+
+    void doByInterval() {
+        
+    }
+
+    void setValue(const IoTValue& Value, bool genEvent = true) {
+        if (_display == nullptr) return;
+
+        value = Value;
+        _display->println(getValue());
+        IoTItem::setValue(Value, genEvent);
+    }
+
+    void onRegEvent(IoTItem* eventItem) {
+        if (_display == nullptr) return;
+        if (!eventItem || _ids2show.size() == 0) return; 
+
+        if (strInVector(eventItem->getID(), _ids2show)) {
+            if (_ids2show.size() == 1) {
+                _display->println(eventItem->getValue());
+            } else {
+                _display->println();
+                for (int i = 0; i < _ids2show.size(); i++) {
+                    IoTItem* item = findIoTItem(_ids2show[i]);
+                    if (item) {
+                        _display->print(item->getValue());    
+                    }
+                }
+            }
+        }
+    }
+
+    ~TM16XX() {
+        delete _display;
+        delete _module;
+    };
+};
+
+void *getAPI_TM16XX(String subtype, String param) {
+    if (subtype == F("TM16XX")) {
+        return new TM16XX(param);
+    } else {
+        return nullptr;
+    }
+}
diff --git a/src/modules/display/TM16XX/modinfo.json b/src/modules/display/TM16XX/modinfo.json
new file mode 100644
index 00000000..9c6461ed
--- /dev/null
+++ b/src/modules/display/TM16XX/modinfo.json
@@ -0,0 +1,133 @@
+{   
+    "menuSection": "Экраны",
+
+    "configItem": [{
+        "global": 0,
+        "name": "7 сегментный дисплей TM16XX",
+        "type": "Writing",
+        "subtype": "TM16XX",
+        "id": "tm",
+        "widget": "inputTxt",
+        "page": "Экраны",
+        "descr": "Экран",
+        "round": 0,
+        
+        "chip": 1637,
+        "numDigits": 4,
+        "DIO": "13",
+        "CLK": "14",
+        "STB": "12",
+        "intensity": "5",
+        "on": "1",
+        "id2show": ""
+    }],
+    
+    "about": {
+        "authorName": "Ilya Belyakov",
+        "authorContact": "https://t.me/Biveraxe",
+        "authorGit": "https://github.com/biveraxe",
+        "specialThanks": "",
+        "moduleName": "TM16XX",
+        "moduleVersion": "1.0",
+        "usedRam": {
+            "esp32_4mb": 15,
+            "esp8266_4mb": 15
+        },
+        "moduleDesc": "Позволяет выводить на 7 сегментный экран серии TM16XX (TM1637, TM1638). Может быть расширен до поддержки TM1616, TM1620, TM1628, TM1630, TM1637, TM1638, TM1640, TM1650, TM1652 и TM1668",
+        "propInfo": {
+            "int": "Период времени в секундах обновления информации на экране по конкретному элементу.",
+            "chip": "Номер чипа TM1637 или TM1638",
+            "numDigits": "Число цифр на дисплее",
+            "DIO": "Номер пина данных",
+            "CLK": "Номер пина часового сигнала",
+            "intensity": "Яркость 0-7",
+            "on": "Вкл/выкл при старте 1/0",
+            "STB": "Номер пина стекового сигнала - не используется на определенных моделях",
+            "id2show": "id элемента конфигурации для отображения. Если пустая строка, то дисплей использует свою переменную. Если указать несколько значений через запятую, то все данные будут последовательно выводиться в строку."
+        },
+        "funcInfo": [
+            {
+                "name": "noBacklight",
+                "descr": "Выключить подсветку",
+                "params": []
+            },
+            {
+                "name": "backlight",
+                "descr": "Включить подсветку",
+                "params": []
+            },
+            {
+                "name": "noDisplay",
+                "descr": "Спрятать все данные",
+                "params": []
+            },
+            {
+                "name": "display",
+                "descr": "Показать данные на экране",
+                "params": []
+            },
+            {
+                "name": "toggle",
+                "descr": "Переключает видимость значений на экране",
+                "params": []
+            },
+            {
+                "name": "x",
+                "descr": "Устанавливает первую координату",
+                "params": ["Номер строки первого символа"]
+            },
+            {
+                "name": "y",
+                "descr": "Устанавливает вторую координату",
+                "params": ["Номер столбца первого символа"]
+            },
+            {
+                "name": "descr",
+                "descr": "Задает приставку слева от значения",
+                "params": ["Строка"]
+            },
+            {
+                "name": "id2show",
+                "descr": "Задает ИД элемента, значение которого хотим отображать на экране",
+                "params": ["Имя элемента конфигурации"]
+            }
+        ]
+    },
+
+    "defActive": true,
+
+    "usedLibs": {
+        "esp32_4mb": [
+            "https://github.com/maxint-rd/TM16xx",
+            "adafruit/Adafruit GFX Library @ ^1.11.5"
+        ],
+        "esp8266_4mb": [
+            "https://github.com/maxint-rd/TM16xx",
+            "adafruit/Adafruit GFX Library @ ^1.11.5"
+        ],
+        "esp8266_1mb": [
+            "https://github.com/maxint-rd/TM16xx",
+            "adafruit/Adafruit GFX Library @ ^1.11.5"
+        ],
+        "esp8266_1mb_ota": [
+            "https://github.com/maxint-rd/TM16xx",
+            "adafruit/Adafruit GFX Library @ ^1.11.5"
+        ],
+        "esp8285_1mb": [
+            "https://github.com/maxint-rd/TM16xx",
+            "adafruit/Adafruit GFX Library @ ^1.11.5"
+        ],
+        "esp8285_1mb_ota": [
+            "https://github.com/maxint-rd/TM16xx",
+            "adafruit/Adafruit GFX Library @ ^1.11.5"
+        ],
+        "esp8266_2mb": [
+            "https://github.com/maxint-rd/TM16xx",
+            "adafruit/Adafruit GFX Library @ ^1.11.5"
+        ],
+        "esp8266_2mb_ota": [
+            "https://github.com/maxint-rd/TM16xx",
+            "adafruit/Adafruit GFX Library @ ^1.11.5"
+        ]
+    }
+}
\ No newline at end of file
diff --git a/src/modules/sensors/RTC/RTC.cpp b/src/modules/sensors/RTC/RTC.cpp
index 727303f0..b9994c5c 100644
--- a/src/modules/sensors/RTC/RTC.cpp
+++ b/src/modules/sensors/RTC/RTC.cpp
@@ -39,18 +39,18 @@ class RTC : public IoTItem {
         return this;
     }
 
-    ulong getRtcUnixTime() {
-        return _watch->gettimeUnix();
+    unsigned long getRtcUnixTime() {
+        return _watch->gettimeUnix() - jsonReadInt(settingsFlashJson, F("timezone")) * 60 * 60;
     }
 
     void onModuleOrder(String &key, String &value) {
         if (key == "setUTime") {
             char *stopstring;
-            ulong ut = strtoul(value.c_str(), &stopstring, 10);
+            unsigned long ut = strtoul(value.c_str(), &stopstring, 10);
             _watch->settimeUnix(ut);
             SerialPrint("i", F("RTC"), "Устанавливаем время: " + value);
         } else if (key == "setSysTime") {
-            _watch->settimeUnix(unixTime);
+            _watch->settimeUnix(unixTime + jsonReadInt(settingsFlashJson, F("timezone")) * 60 * 60);
             SerialPrint("i", F("RTC"), F("Запоминаем системное время"));
         }
     }
diff --git a/src/modules/sensors/ld2410/ld2410.cpp b/src/modules/sensors/ld2410/ld2410.cpp
new file mode 100644
index 00000000..330c9953
--- /dev/null
+++ b/src/modules/sensors/ld2410/ld2410.cpp
@@ -0,0 +1,432 @@
+#include "Global.h"
+#include "classes/IoTItem.h"
+
+#define MONITOR_SERIAL Serial
+#define RADAR_SERIAL Serial1
+// #define RADAR_RX_PIN 32
+// #define RADAR_TX_PIN 33
+
+#include <ld2410.h>
+// ld2410 radar;
+
+ld2410 *radar = nullptr;
+
+ld2410 *instanceradar(uint8_t _rx, uint8_t _tx)
+{
+    if (!radar)
+    { // Если библиотека ранее инициализировалась, т о просто вернем указатель
+      // Инициализируем библиотеку
+        radar = new ld2410();
+        //    radar->begin(); // При необходимости делаем begin библиотеке
+
+        RADAR_SERIAL.begin(256000, SERIAL_8N1, _rx, _tx); // UART for monitoring the radar
+
+        if (radar->begin(RADAR_SERIAL))
+        {
+            SerialPrint("i", "LD2410", "Radar sensor подключен");
+            SerialPrint("i", "LD2410", "Connect LD2410 radar TX to GPIO: " + String(_rx));
+            SerialPrint("i", "LD2410", "Connect LD2410 radar RX to GPIO: " + String(_tx));
+            SerialPrint("i", "LD2410", "LD2410 firmware version: " + String(radar->firmware_major_version));
+            SerialPrint("i", "LD2410", "LD2410 firmware version: " + String(radar->firmware_minor_version));
+            SerialPrint("i", "LD2410", "LD2410 firmware version: " + String(radar->firmware_bugfix_version));
+        }
+        else
+        {
+            SerialPrint("i", "LD2410", "Radar sensor не подключен");
+        }
+    }
+    return radar;
+}
+
+int presence = 0;
+int presence_last = 0;
+int movement = 0;
+int movement_last = 0;
+int distance = 0;
+int distance_last = 0;
+int energy = 0;
+int energy_last = 0;
+int err = 0;
+
+uint32_t lastReadingP = 0;
+uint32_t lastReadingM = 0;
+uint32_t lastReadingD = 0;
+uint32_t lastReadingE = 0;
+bool radarConnected = false;
+
+// датчик присутствия
+class ld2410m : public IoTItem
+{
+private:
+    int _ticker;
+    uint8_t _rx, _tx;
+
+public:
+    //=======================================================================================================
+    // setup()
+
+    ld2410m(String parameters) : IoTItem(parameters)
+    {
+        jsonRead(parameters, "ticker", _ticker);
+        String tmp;
+        jsonRead(parameters, "RX", tmp);
+        _rx = tmp.toInt();
+        jsonRead(parameters, "TX", tmp);
+        _tx = tmp.toInt();
+    }
+
+    void loop()
+    {
+        instanceradar(_rx, _tx)->read();
+        if (instanceradar(_rx, _tx)->isConnected() && millis() - lastReadingP > 1000) // Report every 1000ms
+        {
+            lastReadingP = millis();
+            err = 0;
+            presence = instanceradar(_rx, _tx)->presenceDetected();
+            if (instanceradar(_rx, _tx)->stationaryTargetDetected())
+            {
+                movement = 0;
+                distance = instanceradar(_rx, _tx)->stationaryTargetDistance();
+                energy = instanceradar(_rx, _tx)->stationaryTargetEnergy();
+            }
+            if (instanceradar(_rx, _tx)->movingTargetDetected())
+            {
+                movement = 1;
+                distance = instanceradar(_rx, _tx)->movingTargetDistance();
+                energy = instanceradar(_rx, _tx)->movingTargetEnergy();
+            }
+
+            if (presence != presence_last)
+            {
+                value.valD = int(presence);
+                regEvent(value.valD, "ld2410m");
+                presence_last = presence;
+                //    SerialPrint("i", "LD2410", "присутствие: " + String(int(presence)));
+            }
+
+            if (presence && movement != movement_last)
+            {
+                value.valD = int(presence);
+                regEvent(value.valD, "ld2410m");
+            }
+            if (presence && _ticker)
+            {
+                value.valD = int(presence);
+                regEvent(value.valD, "ld2410m");
+                presence_last = presence;
+            }
+        }
+        if (!instanceradar(_rx, _tx)->isConnected())
+        {
+            if (err == 0)
+            {
+                //    value.valD = "Err";
+                //    regEvent(value.valD, "ld2410m");
+                //    SerialPrint("E", "LD2410", "Radar sensor ошибка получения данных");
+            }
+            err = 1;
+        }
+    }
+
+    IoTValue execute(String command, std::vector<IoTValue> &param)
+    {
+        if (command == "setmaxvalues")
+        {
+            if (param[0].isDecimal && param[1].isDecimal && param[2].isDecimal)
+            {
+                uint8_t newMovingMaxDistance = param[0].valD;
+                uint8_t newStationaryMaxDistance = param[1].valD;
+                uint16_t inactivityTimer = param[2].valD;
+                if (newMovingMaxDistance > 0 && newStationaryMaxDistance > 0 && newMovingMaxDistance <= 8 && newStationaryMaxDistance <= 8)
+                {
+                    if (instanceradar(_rx, _tx)->setMaxValues(newMovingMaxDistance, newStationaryMaxDistance, inactivityTimer))
+                    {
+                        SerialPrint("i", "LD2410", "Параметры установлены. Перезапустите датчик");
+                    }
+                    else
+                    {
+                        SerialPrint("E", "LD2410", "Ошибка записи параметров.");
+                    }
+                }
+                else
+                {
+                    SerialPrint("E", "LD2410", "Заданы не корректные параметры. Диапазон от 1 до 8 ");
+                }
+            }
+        }
+        if (command == "setsensitivity")
+        {
+            if (param[0].isDecimal && param[1].isDecimal && param[2].isDecimal)
+            {
+                uint8_t gate = param[0].valD;
+                uint8_t motionSensitivity = param[1].valD;
+                uint16_t stationarySensitivity = param[2].valD;
+                if (motionSensitivity >= 0 && stationarySensitivity >= 0 && motionSensitivity <= 100 && stationarySensitivity <= 100)
+                {
+                    if (instanceradar(_rx, _tx)->setGateSensitivityThreshold(gate, motionSensitivity, stationarySensitivity))
+                    {
+                        SerialPrint("i", "LD2410", "Параметры установлены. Перезапустите датчик");
+                    }
+                    else
+                    {
+                        SerialPrint("E", "LD2410", "Ошибка записи параметров.");
+                    }
+                }
+                else
+                {
+                    SerialPrint("E", "LD2410", "Заданы не корректные параметры. Диапазон от 1 до 100 ");
+                }
+            }
+        }
+        if (command == "enableengineeringmode")
+        {
+            if (instanceradar(_rx, _tx)->requestStartEngineeringMode())
+            {
+                SerialPrint("i", "LD2410", "Параметры установлены. Перезапустите датчик");
+            }
+            else
+            {
+                SerialPrint("E", "LD2410", "Ошибка записи параметров.");
+            }
+        }
+        if (command == "disableengineeringmode")
+        {
+            if (instanceradar(_rx, _tx)->requestEndEngineeringMode())
+            {
+                SerialPrint("i", "LD2410", "Параметры установлены. Перезапустите датчик");
+            }
+            else
+            {
+                SerialPrint("E", "LD2410", "Ошибка записи параметров.");
+            }
+        }
+        if (command == "restart")
+        {
+            if (instanceradar(_rx, _tx)->requestRestart())
+            {
+                SerialPrint("i", "LD2410", "Датчик перезапущен");
+            }
+            else
+            {
+                SerialPrint("E", "LD2410", "Ошибка перезапуска датчика.");
+            }
+        }
+        if (command == "readversion")
+        {
+            if (instanceradar(_rx, _tx)->requestFirmwareVersion())
+            {
+                SerialPrint("i", "LD2410", (String)instanceradar(_rx, _tx)->firmware_major_version);
+                SerialPrint("i", "LD2410", (String)instanceradar(_rx, _tx)->firmware_minor_version);
+            }
+            else
+            {
+                SerialPrint("E", "LD2410", "Ошибка получения версии.");
+            }
+        }
+        if (command == "factoryreset")
+        {
+            if (instanceradar(_rx, _tx)->requestFactoryReset())
+            {
+                SerialPrint("i", "LD2410", "Параметры установлены. Перезапустите датчик");
+            }
+            else
+            {
+                SerialPrint("E", "LD2410", "Ошибка сброса параметров.");
+            }
+        }
+    }
+    ~ld2410m(){};
+};
+//---------------------------------------------------------------------------
+
+// движение / стационарное - присутствие
+class ld2410t : public IoTItem
+{
+private:
+    uint8_t _rx, _tx;
+
+public:
+    //=======================================================================================================
+    // setup()
+
+    ld2410t(String parameters) : IoTItem(parameters)
+    {
+        String tmp;
+        jsonRead(parameters, "RX", tmp);
+        _rx = tmp.toInt();
+        jsonRead(parameters, "TX", tmp);
+        _tx = tmp.toInt();
+    }
+
+    void loop()
+    {
+        instanceradar(_rx, _tx)->read();
+        if (instanceradar(_rx, _tx)->isConnected() && millis() - lastReadingM > 1000) // Report every 1000ms
+        {
+            lastReadingM = millis();
+            err = 0;
+            presence = instanceradar(_rx, _tx)->presenceDetected();
+            if (instanceradar(_rx, _tx)->stationaryTargetDetected())
+            {
+                movement = 0;
+                //    distance = instanceradar(_rx, _tx)->stationaryTargetDistance();
+                //    energy = instanceradar(_rx, _tx)->stationaryTargetEnergy();
+            }
+            if (instanceradar(_rx, _tx)->movingTargetDetected())
+            {
+                movement = 1;
+                //    distance = instanceradar(_rx, _tx)->movingTargetDistance();
+                //    energy = instanceradar(_rx, _tx)->movingTargetEnergy();
+            }
+        }
+        if (presence == 0 && movement_last != 0)
+        {
+            movement = 0;
+        }
+        if (movement != movement_last)
+        {
+            value.valD = int(movement);
+            regEvent(value.valD, "ld2410t");
+            movement_last = movement;
+        }
+    }
+
+    ~ld2410t(){};
+};
+//---------------------------------------------------------------------------
+
+// дистанция
+class ld2410d : public IoTItem
+{
+private:
+    uint8_t _rx, _tx;
+
+public:
+    //=======================================================================================================
+    // setup()
+
+    ld2410d(String parameters) : IoTItem(parameters)
+    {
+        String tmp;
+        jsonRead(parameters, "RX", tmp);
+        _rx = tmp.toInt();
+        jsonRead(parameters, "TX", tmp);
+        _tx = tmp.toInt();
+    }
+
+    void loop()
+    {
+        instanceradar(_rx, _tx)->read();
+        if (instanceradar(_rx, _tx)->isConnected() && millis() - lastReadingD > 1000) // Report every 1000ms
+        {
+            lastReadingD = millis();
+            err = 0;
+            presence = instanceradar(_rx, _tx)->presenceDetected();
+            if (instanceradar(_rx, _tx)->stationaryTargetDetected())
+            {
+                //    movement = 0;
+                distance = instanceradar(_rx, _tx)->stationaryTargetDistance();
+                //    energy = instanceradar(_rx, _tx)->stationaryTargetEnergy();
+            }
+            if (instanceradar(_rx, _tx)->movingTargetDetected())
+            {
+                //    movement = 1;
+                distance = instanceradar(_rx, _tx)->movingTargetDistance();
+                //    energy = instanceradar(_rx, _tx)->movingTargetEnergy();
+            }
+            if (presence == 0 && distance_last != 0)
+            {
+                distance = 0;
+            }
+            if (distance != distance_last)
+            {
+                value.valD = int(distance);
+                regEvent(value.valD, "ld2410d");
+                distance_last = distance;
+            }
+        }
+    }
+    ~ld2410d(){};
+};
+//---------------------------------------------------------------------------
+
+// энергия
+class ld2410e : public IoTItem
+{
+private:
+    uint8_t _rx, _tx;
+
+public:
+    //=======================================================================================================
+    // setup()
+
+    ld2410e(String parameters) : IoTItem(parameters)
+    {
+        String tmp;
+        jsonRead(parameters, "RX", tmp);
+        _rx = tmp.toInt();
+        jsonRead(parameters, "TX", tmp);
+        _tx = tmp.toInt();
+    }
+
+    void loop()
+    {
+        instanceradar(_rx, _tx)->read();
+        if (instanceradar(_rx, _tx)->isConnected() && millis() - lastReadingE > 1000) // Report every 1000ms
+        {
+            lastReadingE = millis();
+            err = 0;
+            presence = instanceradar(_rx, _tx)->presenceDetected();
+            if (instanceradar(_rx, _tx)->stationaryTargetDetected())
+            {
+                //    movement = 0;
+                // distance = instanceradar(_rx, _tx)->stationaryTargetDistance();
+                energy = instanceradar(_rx, _tx)->stationaryTargetEnergy();
+            }
+            if (instanceradar(_rx, _tx)->movingTargetDetected())
+            {
+                //    movement = 1;
+                // distance = instanceradar(_rx, _tx)->movingTargetDistance();
+                energy = instanceradar(_rx, _tx)->movingTargetEnergy();
+            }
+            if (presence == 0 && energy_last != 0)
+            {
+                energy = 0;
+            }
+            if (energy != energy_last)
+            {
+                value.valD = int(energy);
+                regEvent(value.valD, "ld2410e");
+                // value = Value;
+                // regEvent((String)(int)value.valD, F("ld2410e"), false, true);
+                // SerialPrint("i", "LD2410", "Radar sensor энергия: " + String(energy));
+                energy_last = energy;
+            }
+        }
+    }
+    ~ld2410e(){};
+};
+//---------------------------------------------------------------------------
+void *getAPI_ld2410(String subtype, String param)
+{
+    if (subtype == F("ld2410m"))
+    {
+        return new ld2410m(param);
+    }
+    else if (subtype == F("ld2410t"))
+    {
+        return new ld2410t(param);
+    }
+    else if (subtype == F("ld2410d"))
+    {
+        return new ld2410d(param);
+    }
+    else if (subtype == F("ld2410e"))
+    {
+        return new ld2410e(param);
+    }
+    else
+    {
+        return nullptr;
+    }
+}
diff --git a/src/modules/sensors/ld2410/modinfo.json b/src/modules/sensors/ld2410/modinfo.json
new file mode 100644
index 00000000..78b06bc4
--- /dev/null
+++ b/src/modules/sensors/ld2410/modinfo.json
@@ -0,0 +1,92 @@
+{
+    "menuSection": "Сенсоры",
+    "configItem": [
+        {
+            "global": 0,
+            "name": "LD2410 Датчик присутствия",
+            "type": "Reading",
+            "subtype": "ld2410m",
+            "id": "ld2410m",
+            "widget": "anydataDef",
+            "page": "Сенсоры",
+            "descr": "Присутствие",
+            "RX": 32,
+            "TX": 33,
+            "val": 0,
+            "round": 0,
+            "ticker": 0
+        },
+        {
+            "global": 0,
+            "name": "LD2410 подвижность объета",
+            "type": "Reading",
+            "subtype": "ld2410t",
+            "id": "ld2410t",
+            "widget": "anydataDef",
+            "page": "Сенсоры",
+            "descr": "Движение",
+            "RX": 32,
+            "TX": 33,
+            "val": 0,
+            "round": 0
+        },
+        {
+            "global": 0,
+            "name": "LD2410 дистанция до объекта",
+            "type": "Reading",
+            "subtype": "ld2410d",
+            "id": "ld2410d",
+            "widget": "anydataCm",
+            "page": "Сенсоры",
+            "descr": "Дистанция",
+            "RX": 32,
+            "TX": 33,
+            "val": 0,
+            "round": 0
+        },
+        {
+            "global": 0,
+            "name": "LD2410 отраженная энергия",
+            "type": "Reading",
+            "subtype": "ld2410e",
+            "id": "ld2410e",
+            "widget": "anydataHum",
+            "page": "Сенсоры",
+            "descr": "Энергия",
+            "RX": 32,
+            "TX": 33,
+            "val": 0,
+            "round": 0
+        }
+    ],
+    "about": {
+        "authorName": "AVAKS",
+        "authorContact": "https://t.me/avaks",
+        "authorGit": "https://github.com/avaksru",
+        "exampleURL": "https://iotmanager.org/wiki",
+        "specialThanks": "Mitchel https://t.me/Mit4bmw",
+        "moduleName": "ld2410",
+        "moduleVersion": "1.0",
+        "usedRam": {
+            "esp32_4mb": 15,
+            "esp8266_4mb": 0
+        },
+        "subTypes": [
+            "ld2410m",
+            "ld2410t",
+            "ld2410d",
+            "ld2410e"
+        ],
+        "title": "Радарный датчик присутствия человека Hi-Link HLK-LD2410",
+        "moduleDesc": "Умный датчик, который измеряет расстояние, определяет стоит объект или двигается. Умеет разбивать зоны движения (всего можно до 8 зон задать). ",
+        "propInfo": {
+            "ticker": "1 - генерирует событие каждую секунду пока обнаружено присутствие, 0 - событие генереруется только один раз когда присутствие обнаружено или когда обьект вышел из поля обнаружения датчика"
+        }
+    },
+    "defActive": false,
+    "usedLibs": {
+        "esp32_4mb": [
+            "ncmreynolds/ld2410@^0.1.3"
+        ]
+    }
+}
\ No newline at end of file
diff --git a/src/utils/JsonUtils.cpp b/src/utils/JsonUtils.cpp
index fa89de73..59950c9f 100644
--- a/src/utils/JsonUtils.cpp
+++ b/src/utils/JsonUtils.cpp
@@ -238,6 +238,18 @@ int jsonReadInt(const String& json, String name, bool e) {
     return doc[name].as<int>();
 }
 
+long int jsonReadLInt(const String& json, String name, bool e) {
+    DynamicJsonDocument doc(JSON_BUFFER_SIZE);
+    DeserializationError error = deserializeJson(doc, json);
+    if (error) {
+        if (e) {
+            SerialPrint("E", F("jsonRead"), error.f_str());
+            jsonErrorDetected();
+        }
+    }
+    return doc[name].as<long int>();
+}
+
 // depricated========================================================================
 String jsonWriteStr(String& json, String name, String value, bool e) {
     DynamicJsonDocument doc(JSON_BUFFER_SIZE);
diff --git a/src/utils/Statistic.cpp b/src/utils/Statistic.cpp
index 812236dc..621e1de5 100644
--- a/src/utils/Statistic.cpp
+++ b/src/utils/Statistic.cpp
@@ -16,8 +16,8 @@ void stInit() {
 
 void updateDeviceStatus() {
     String ret;
-    String serverIP;
-    jsonRead(settingsFlashJson, F("serverip"), serverIP);
+    String serverIP = "http://iotmanager.org";
+    // jsonRead(settingsFlashJson, F("serverip"), serverIP);
     String url = serverIP + F("/projects/esprebootstat.php");
     // SerialPrint("i", "Stat", "url " + url);
     if ((WiFi.status() == WL_CONNECTED)) {
diff --git a/src/utils/StringUtils.cpp b/src/utils/StringUtils.cpp
index 4234a68f..f33db48c 100644
--- a/src/utils/StringUtils.cpp
+++ b/src/utils/StringUtils.cpp
@@ -204,4 +204,23 @@ void cleanString(String& str) {
     for (size_t i = 0; i < str.length(); i++) {
         if (allowedChars.indexOf(str.charAt(i)) == -1) str.setCharAt(i, ' ');
     }
+}
+
+std::vector<String> splitStr(const String& str, const String& delimiter) {
+    std::vector<String> result;
+    size_t newPos, pos = 0;
+    while ((newPos = str.indexOf(delimiter, pos)) != -1) {
+        result.push_back(str.substring(pos, newPos));
+        pos = newPos + delimiter.length();
+    }
+    result.push_back(str.substring(pos));
+    return result;
+}
+
+
+bool strInVector(const String& str, const std::vector<String>& vec) {
+    for (size_t i = 0; i < vec.size(); i++) {
+        if (vec[i] == str) return true;
+    }
+    return false;
 }
\ No newline at end of file
diff --git a/src/utils/TimeUtils.cpp b/src/utils/TimeUtils.cpp
index aa8588f5..ef850250 100644
--- a/src/utils/TimeUtils.cpp
+++ b/src/utils/TimeUtils.cpp
@@ -2,7 +2,7 @@
 #include "Global.h"
 #include "utils/StringUtils.h"
 
-static const char* TIME_FORMAT PROGMEM = "%02d:%02d";  //:%02d";
+static const char* TIME_FORMAT PROGMEM = "%02d:%02d:%02d";
 static const char* TIME_FORMAT_WITH_DAYS PROGMEM = "%dd %02d:%02d";
 
 const String prettySeconds(unsigned long time_s) {